Set of standard thrust washers for 1275.

($11.25) £11.25 exc vat

($13.50) £13.50 inc vat

MAINS SET STANDARD PRE A PLUS/EARLY A+ 1275

Main bearings, 1275 2" mains.STD size. Heavy duty steel backed bearing for durability and long life. The bearings to use if you want it to last. The only bearings to use on a fast road motor.

Sintered copper lead, lead plated,steel backed

($30.00) £30.00 exc vat

($36.00) £36.00 inc vat

MAINS STANDARD 1275 A PLUS ONLY 3 SIDE TAG 3 CENTR...

AEM91886-00

Original equipment quality for factory built engines giving longer life expectancy on road cars under variable conditions of oil and use. These are the 1275cc mains as fitted to A Plus engines with the locating tab in the middle rather than to the ou...

($30.00) £30.00 exc vat

($36.00) £36.00 inc vat

BIG ENDS SET STANDARD 1275 EXCEPT COOPER S

AEB91306-00

Big end shell bearings for the 1275 larger 1.75" diameter rod pin-not Cooper S

( Tri-Metal )

Sintered copper lead, lead plated,steel backed

Nominal Composition

Copper 74%

Lead 24%

Tin ...

($28.50) £28.50 exc vat

($34.20) £34.20 inc vat

CRANKSHAFT WOODRUFF KEY

6K836

Woodruff key for the end of the crankshaft to locate the lower timing chain gear and WKN505 is for the camshaft key to hold the larger timing gear.

($4.98) £4.98 exc vat

($5.98) £5.98 inc vat

BIG END SET 10 OVERSIZE 1275 EXCEPT COOPER S

AEB91306-10

Big end shell bearings for the 1275 larger 1.75" diameter rod pin-not Cooper S

( Tri-Metal )

Sintered copper lead, lead plated,steel backed

Nominal Composition

Copper 74%

Lead 24%

Tin ...

($28.50) £28.50 exc vat

($34.20) £34.20 inc vat

BIG ENDS SET STANDARD 1275 EXCEPT COOPER S

AEB91306-00

Big end shell bearings for the 1275 larger 1.75" diameter rod pin-not Cooper S

( Tri-Metal )

Sintered copper lead, lead plated,steel backed

Nominal Composition

Copper 74%

Lead 24%

Tin ...

($28.50) £28.50 exc vat

($34.20) £34.20 inc vat

FLYWHEEL KEYWAY - PRE VERTO (MADE IN EN24T STEEL)

88G508

Made in EN24T for strength they have been made to fit the majority of flywheels that seemed to slightly differ from the mid 60s. Run a file down the raised keyway if tight. This flywheel locking plate is for pre verto diaphragm clutches. For Verto ty...

($8.63) £8.63 exc vat

($10.36) £10.36 inc vat

PRIMARY GEAR FRONT FLOATING BUSH 1275cc

C-AEA3240

This is our racers favourite way of dealing with the worn or troublesome front primary gear bush.(this is NOT the top hat type rear bush)22.5mm wide. Racers and professional engine builders will use their own tolerances but these are set for road use...

($18.15) £18.15 exc vat

($21.78) £21.78 inc vat

BIG ENDS STANDARD 998/1100 COOPER S

AEB572-00

Rod bearings, 850-1275 1 5/8" journals. Heavy duty steel backed bearing for durability and long life. The bearings to use if you want it to last. The only bearings to use on a fast road car.

( Tri-Metal )

Sintered copper lead, lead...

($28.50) £28.50 exc vat

($34.20) £34.20 inc vat

CON ROD BOLT SET 1275cc NOT "S" ARP NUT/BOLT SET

C-STR289

These con rod bolt and nut set are made by ARP in the USA and considered the best available FITS 1300 con rods plus MGB late 18V engine numbers with 11-32" bolts. Quantity required one kit per car. torque up to 38-40lb ft.

($120.00) £120.00 exc vat

($144.00) £144.00 inc vat

LOCKTAB BIG ENDS ON CRANKSHAFT EXCEPT 1275

2A660

LOCKTAB FOR CON ROD BIG END BOLTS ON SMALL BORE A SERIES ENGINES.

($1.12) £1.12 exc vat

($1.34) £1.34 inc vat

PRIMARY GEAR BACKING RING 2 thou thicker

88G549

Genuine Mini Spares product. Spacer fits up against the primary gear on the crankshaft and held on by the "C" washer 22A319 - both these parts wear as well as the gear. Now made 2 thou oversize to help corect wear issues.

Only f...

($14.70) £14.70 exc vat

($17.64) £17.64 inc vat

SWIFTUNE PERFORMANCE DIE CAST PISTON SET 1275 +20

C-STN103-20

These Swiftune die cast performance pistons are part of their new Heritage range and are manufactured by global leading German F1 piston manufacturer Mahle. These pistons have been developed using their 50 plus years of experience.

Glyn Swif...

($299.00) £299.00 exc vat

($358.80) £358.80 inc vat

MINI 1275 CAM LINER SET

MS3063

You should replace the camshaft bearings every time the block goes to the machine shop. These bearings fit all late model 1275cc blocks (the ones without tappet covers on the back) It's almost too simple and thus often overlooked during a rebuild. Ca...

($15.75) £15.75 exc vat

($18.90) £18.90 inc vat

MINI SPARES COMBINED BLOCK/GEARBOX GASKET AND SEAL...

AJM100MS

Mini Spares best quality complete gasket and seal kit for engine block and gearbox,for all common engine types and sizes.

Also comes complete with Mini Spares Evolution clutch oil seal 13H2934MS, differential oil seals...

($26.00) £26.00 exc vat

($31.20) £31.20 inc vat

MAINS STANDARD SIZE 1275CC A PLUS ONLY ACL RACE

C-AEM91886-00

ACL Race Bearings

ACL Race series bearings are precision manufactured to a wall thickness of ±0.0040mm giving engine builders close control of vertical oil clearance.

What is the purpose of ACL Race series bearings?
...

($78.62) £78.62 exc vat

($94.34) £94.34 inc vat

BIG ENDS 1300 STD SIZE EXCEPT COOPER S ACL RACE

C-AEB91306-00

ACL Race Bearings

ACL Race series bearings are precision manufactured to a wall thickness of ±0.0040mm giving engine builders close control of vertical oil clearance.

What is the purpose of ACL Race series bearings?
...

($69.06) £69.06 exc vat

($82.87) £82.87 inc vat

BIG ENDS SET 998/1098/970/1071/ COOPER "S" ACL RAC...

C-AEB572-00

ACL Race Bearings

ACL Race series bearings are precision manufactured to a wall thickness of ±0.0040mm giving engine builders close control of vertical oil clearance.

What is the purpose of ACL Race series bearings?
...

($66.27) £66.27 exc vat

($79.52) £79.52 inc vat

TIMING CHAIN DUPLEX LIMITED STRETCH TYPE

2H4905EVO

Race quality heavy duty double row performance endless timing chain. It is the best chain available and used by top engine builders, also fits MGB/Midget. This chain is for duplex gears that is used by racers as a limited stretch heavy duty version m...

($19.64) £19.64 exc vat

($23.57) £23.57 inc vat

TIMING CHAIN SINGLE ROW SPECIAL QUALITY

3H2127EVO

Special superb extra strong timing chain with very limited stretch using modern day materials and technology to keep your timing correct and will fit any A series engine using a single row chain.

This chain saves all the time and effort requ...

($22.05) £22.05 exc vat

($26.46) £26.46 inc vat

8° OFFSET WOODRUFF KEY

WKN8OSET

Proper timing of the camshaft is very important and while it is easy and nice to do it with a precise adjustable cam sprocket it is also cheap to do it with offset cam keys. 1 or 2 degrees difference in cam timing can make a difference in performance...

($10.50) £10.50 exc vat

($12.60) £12.60 inc vat

6° OFFSET WOODRUFF KEY

WKN6OSET

Proper timing of the camshaft is very important and while it is easy and nice to do it with a precise adjustable cam sprocket it is also cheap to do it with offset cam keys. 1 or 2 degrees difference in cam timing can make a difference in performance...

($10.50) £10.50 exc vat

($12.60) £12.60 inc vat

4° OFFSET WOODRUFF KEY

WKN4OSET

Proper timing of the camshaft is very important and while it is easy and nice to do it with a precise adjustable cam sprocket it is also cheap to do it with offset cam keys. 1 or 2 degrees difference in cam timing can make a difference in performance...

($10.50) £10.50 exc vat

($12.60) £12.60 inc vat