BRAKE DISC 7.5" AND EBC PAD SET
MS35

($56.91) £56.91 exc vat

($68.29) £68.29 inc vat

In stockIn stock
A pair of 7.5" brake discs and one set of Kevlar road brake pads.

($56.91) £56.91 exc vat

($68.29) £68.29 inc vat

In stockIn stock

Recommended usage 1 x MS35 to fit one mini.

Recommended products

Correct size and length brake pad pin for the caliper using 7.5" disc size as fitted to Cooper S and 1275GT. 4 required for 1 car, also fits Cooper 7" calipers. 3mm diameter.

Alternative products

Minispares own brand upgraded to GR260-BS1452.

This is 7.5" diameter disc to fit all Mini Cooper S and early 1275GT models and is ideal for all fast road uses. For standard spec material see GBD101MS.

Mini Spares standard road use disc 7.5" wide using material GG25EURO.

These were standard fitment on all Cooper S models plus early 1275GT made from OE drawings to the correct material spec. Cheaper types on the market that we have tried sin...

Kit contained products

Mini Spares standard road use disc 7.5" wide using material GG25EURO.

These were standard fitment on all Cooper S models plus early 1275GT made from OE drawings to the correct material spec. Cheaper types on the market that we have tried sin...

Our favourite pads as the give less brake pad dust which destroys alloy wheels.

Very durable and great for most road usage. The green upgrade for fast street is C-8G8995GREEN.

People also bought products

12" wheel to 10" wheel running gear conversion kit. Less wheels.

This kit will convert your 8.4 disc set up to the Cooper S 7.5 discs to allow fitment of 10" wheels, kit includes discs, calipers, kevlar pads with split pins and drive flanges...

7.5" Vented brake disc, suitable for use with our vented alloy 4 pot calipers (C-AJJ4023 together with C-AJJ4021). These are sold individually but should always be replaced in pairs. These are in fact 8.4" vented discs machined down

to 7.5" ...

Pair of vented discs and Mintex GBP258AF pads,one of our best selling brake disc kits. Includes discs[link](GBD496)/link] which are a bargain.Only for carss fitted with vented discs already.

This is not a direct replacement kit ...

If your rear brake drums have 1" built in spacers such as all Cooper S and any post 1984 minis, these are the longer drum retaining screws, 2 required per drum and sold individually.

A pair of L/H shield covers for 7.5" disc as fitted to Cooper S

The little locating bracket to the hub is available seperate as BTA1209

Suitable for standard 8.4" / 7.5" /7" brake calipers. Also used for front wheel cylinders on twin leading shoe type drum brake cars. This is where you have 2 cylinders per hub as opposed to the early single leading type which had one cylinder only pe...

The screw that holds the drum on the hub. Earlier hubs had two screws, many replacements have only one, all that’s needed.

8.4" diameter as used standard on all late model Minis with 12 or 13 inch wheels. Our premium quality item. See GBD90806MS for a cheaper option.

Sold individually, but should be replaced as pairs.

A pair of r/h disc shield covers for 7.5"wide brake discs as per cooper S

If you require the little bracket order seperate as BTA1208

Cooper S disc brake water shields are easily damaged and hence frequently missing altogether. A complete kit consists of six different components: upper and lower shields plus mounting tabs for each side. Complete set is 21A1271, [link]2...

Cooper S disc brake water shields are easily damaged and hence frequently missing altogether. A complete kit consists of six different components: upper and lower shields plus mounting tabs for each side. Complete set is 21A1271, [link]2...

Mini Spares standard road use disc 7.5" wide using material GG25EURO.

These were standard fitment on all Cooper S models plus early 1275GT made from OE drawings to the correct material spec. Cheaper types on the market that we have tried sin...

Cooper S disc brake water shields are easily damaged and hence frequently missing altogether. A complete kit consists of six different components: upper and lower shields plus mounting tabs for each side. Complete set is 21A1271, [link]2...

The 7" diameter original Mini Cooper size disc. This was standard fitement on all 997/998cc Cooper models 1961-69. (NOT suitable for Mini Cooper S which use a 7.5" diameter disc).

Minispares own brand upgraded to GR260-BS1452.

This is 7.5" diameter disc to fit all Mini Cooper S and early 1275GT models and is ideal for all fast road uses. For standard spec material see GBD101MS.

Cooper S disc brake water shields are easily damaged and hence frequently missing altogether. A complete kit consists of six different components: upper and lower shields plus mounting tabs for each side. Complete set is 21A1271, [link]2...

Grooved and dimpled 8.4 discs (pair).

Suitable for all classic Minis built from 1984 to 2000 except ERA.

A common complaint of standard issue Cooper S brake discs is that they wear too fast. The wear is caused by grit getting caught under the pads, and is amplified by the fact that the discs are made of too-soft material. These heavy duty, competition d...

Gasket between backplate and front wheel cylinders on cars with 2 cylinders per wheel.