MIRROR HEAD ROUNDED COLLAR-GREY
47H9649

(4,00 €) £4.00 exc vat

(4,80 €) £4.80 inc vat

In stockIn stock
Collar for the mirror in grey with a rounded shape as opposed to the grey pointed type as fitted to complete mirror 24A1750

The Light grey plastic 6" mirror as fitted from 1964 - 1970.

The first 6" light grey plastic mirror with a twin ball stem and black sucker was patented in 1962 and first fitted in October 1964. The twin ball stem was replaced with a 3 ball stem 24A2111 which had the extra ball on the stem centre where a new clear plastic sucker CRT10004 was attached.The early black sucker was fitted to cars with sun visors that had a hinge at one end and a clip at the other.

When they introduced the sun visor with hinges at both ends in 1965 they started fitting the 3 ball mirror stem shortly afterwards.

The white mirror was introduced on production cars from MK3 1970 on but seems to be found on some earlier cars although many look white when blemished by the sun.

It is only when you look behind the glass of the mirror or inside of foot where it attaches the body the true colour can be seen. Most Rover aftermarket mirrors were sold as grey-see 24A1750 but both white and grey 6" mirrors appeared under this part number by Rover and then winguard made a 7.25" mirror

in white to confuse all..Most Mk1 and Mk2 had grey 6" wide mirrors

(4,00 €) £4.00 exc vat

(4,80 €) £4.80 inc vat

In stockIn stock

Recommended usage 1 x 47H9649 to fit one mini.

Alternative products

Alternative Collar for the WHITE mirror but with a TAPERED shape as opposed to the white rounded type as fitted to complete mirror 24A2110

The Light grey plastic 6" mirror was fitted from 1964 - 1970.white 1970 on

The ...

People also bought products

Interior lamp with a black on/off switch and pointed torpedo ends.

Also fitted many of the 1959on range of Austin A55/60 Cambridge, MG Magnette etc.

Also there was an alternative lamp with black switch and square ends 13H192 which w...

MK3 Black Mini door and rear quarter trim(4 piece kit) in vinyl as per original twin line pattern per Mini and CooperS but for cars after May 1973 where the rear quarter panel trim shape did not have a cut out for the ash tray mount and if you look a...

Auto retractable seat belt kit. Sold per seat. The manufacturer states that these belts are direct replacements for the pre tensioner types fitted in Europe.



It will arrest the wearer within the same tolerances without a need for a...

plastic heater knob that pushes on the end of the control lever on Mk1/2 heaters. one required per car.

Black door pocket liner for the R/H door which has sliding windows and external hinges

Black door pocket liner for the L/H door which has sliding windows and external hinges

Plain white with white backing aftermarket sun visor as fitted to Mk3 models 1977-92 which were thinner than Mk1 for safety crushing requirements. Although not standard for earlier models will fit cars from December 1965. Check out the special clips ...

Alternative Collar for the WHITE mirror but with a TAPERED shape as opposed to the white rounded type as fitted to complete mirror 24A2110

The Light grey plastic 6" mirror was fitted from 1964 - 1970.white 1970 on

The ...

Headlining kit including C post trims in cream crackle for 67-69 Minis which have a larger rear screen.

Cream with crackle finish sun visor fitted as standard from December 1965-69 but will fit Mk3 on if required. With mirror for passenger side. For a car set of clips see SV2021

Mk1/2 1965 on cream crackle SV2017C

Mk3 196...

Cream colour crackle finish sun visor as fitted from december 1965 onwards. Will fit later cars if required. Drivers side without mirror.Check out the special clips to hold these visors as they are sold seperately in car sets only as SV2021<...

Light grey plastic 6" mirror fitted by BMC as standard from October 1964-69.

The first light grey plastic 6" mirror with a twin ball stem and black sucker was patented in 1962 but not fitted until October 1964. At the end of 1965 the twin ba...

White plastic 6" mirror as fitted by Leyland from Late 1970-75.

Also found intermittently on earlier cars but original grey fades into white.

The first 6" light grey plastic mirrors was patented in 1962 but were first fitted from Oc...

Special clip for the lower brightwork moulding 14A8009 for finishing off the lower dash, crash pad rail, or on earlier cars the painted metal surface of the panel which holds the switch panel section.

The moulding 14A80...

Interior lamp (dome lamp) lens. Fitted from 1959 to 1974 (mk 1 2 3).

Fits our 14A9148 and 13H4398 lamps

couser grain than WAC3024 fitted from 1970 on Coooper S -Clubmans and 1970 on itermittently.later cars had the finer grain pattern WAC3024A but black all look the same in the car. Comes in a pair.

Car set (one pair) rear wheel arch vinyl trim covers.

Original MK1/2 finer grain wheel arch cover-heavier grain pattern is WAC3025A although not much diffferent and never noticed.

This plastic handle fitted any wind up window cars up to the introduction of the twin points, which then changed and the handle fitted from 1996 on is now obsolete.

Rocker switch for all models with front fog lights fitted as standard. Please note the lens colour is now green. 6 pins on the back for plastic loom connector.