(7,00 €) £7.00 exc vat
(8,40 €) £8.40 inc vat
In stock
(7,00 €) £7.00 exc vat
(8,40 €) £8.40 inc vat
In stockRecommended usage 4 x AHU1976 to fit one mini.
Set of strong lightweight titanium top caps to suit our valve springs C-AEA526/527 hard for single collet competition valves. Sold as a set of 8.
Genuine Mini Spares valve stem oil seal manufactured with original Dupont Viton, as fitted to the twin points engines, are the best material and seal you can use and although expensive are the best to date in stopping the engine smoking.
Man...
Sold individually.
To help rocker pad to valve stem alignment and reduce friction, the standard springs can be replaced with solid spacers and correctb shim set. The spacers and shim kit are sold as C-AEG392.
1.220" (31mm) dia x 3.57 exhaust valve.
Our race valves are produced in EN214N steel and are stellite tipped and use the later narrow, single collet groove and current valve head shapes.These valves are plasma heat treated to eradicate wear ...
Collet for the 3 groove valve. Sold per half and 2 required per valve.
These cotters go with AHU1897 top cap. On Turbo heads after engine number 102641 were fitted on the inlet only.
All early 850/997/998/1098cc heads u...
If you drive A-Series cars long enough you will eventually have to replace the water pump bypass hose. These are the best quality available to fit without removing the cylinder head but these fluted rubber hoses have a bad reputation so if possible ...
Original type steel 'S' competition top caps for dual springs.
If you are upgrading from single springs or just want to replace those old worn top caps, these better grade material are the best answer. Eight required per head.
That tell tale puff of blue smoke when you first start is an indicator of worn guides or seals. Valve guides should be replaced with every valve job.
Sold individually, these are the original quality Cooper S guides for use in any head espec...
1.158" (29.4) diameter exhaust valve for 12G940 casting.
Our race valves are produced in EN214N and plasma heat treated to eradicate wear from unleaded petrol. They are stellite tipped and use the later narrow, single collet gro...
Mini Spares spacer kit re-designed in 2005 for correcting rocker alignment.
This kit has been produced to help rocker pad and valve stem alignment plus reducing friction. The standard springs can be replaced with this special kit of 3 spacer...
1.3" x 3.57" small collet intake valves, standard on Austin America, A-H Sprite, MG Midget and later A-Plus 1275cc Mini.
As it is possible, even common, to swap one head for another on 1275 engines, it is quite easy to become confused, or wo...
1.402" (35.6mm) dia x 3.57" long intake valve.
Our race valves are produced in EN214N steel and are stellite tipped and use the later narrow, single collet groove and current valve head shapes. They are plasma heat treated to eradicate wear ...
Hardened unleaded valve seats for 1.15" 1275 exhaust valves.
Require a recess of 1.2495"(31.737mm) diameter, plus or minus 0.0005" (0.013mm), and 0.250"(6.35m) deep at ambient temperature of 20C.
Special quality 33mm inlet valve for the ERA and MG Turbo with triple collet grooves from engine number 10241--most owners now use single collet type race valve EN214N material for both inlet and exhaust with bronze guides.
These are the exhaust valve seats for lead free small bore cylinder heads
850/998/1100. If you require inlets see TAM2152.
Fitted from 1988 with introduction of press fit high compression pistons although many earlier h...
For specialised race use only, these springs are 267lb@ 1/2"lift fitted.
(use C-AEA526 for race and fast road cams)
Modern high lift, short duration camshafts have posed quite a few problems for the general public in re...
Modern high lift, short duration camshafts have posed quite a few problems for the general public in recent years. Widely available performance valve springs were outdated overnight, as it became necessary to reduce spring crush. This, in turn, cause...
Top cap for all A Plus valves with the triple groove collets. Metro from 1984 on and mini 1275 from 1990
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.