BRAKE HOSE BRAIDED FRONT PAIR ONLY
C-AJJ4030

(29,45 €) £29.45 exc vat

(35,34 €) £35.34 inc vat

In stockIn stock
Pair of front only braided steel hoses. Please be aware these are sided, the deeper internal threaded hose fits the right hand side, the shallower hose fits the passenger side.



These do not fit Portugese Mokes as they need 2 shallo...

(29,45 €) £29.45 exc vat

(35,34 €) £35.34 inc vat

In stockIn stock

Recommended usage 1 x C-AJJ4030 to fit one mini.
Brake Pipes - Front to Rear Split 1985 on - Qty 1pr

Recommended products

This special shake proof washer should be replaced. Found on front hose.

Also used on 21A1524 hydrolastic pipe adaptor.

Alternative products

Set of 5 braided hoses. 2 front brakes, 2 rear brakes, and clutch hose for pre A+.

If it is time to replace the brake lines on your Mini, and it probably is, you should consider replacing them with braided-steel hoses. They are direct bolt...

Set of 4 hoses, 2 front and 2 rear.

Braided brake and clutch hoses have a PTFE inner which helps to eliminate the spongy pedal feel under arduous conditions, and give greater efficiency. The outer braided stainless steel cover e...

Kit products

Alloy Vented Brake conversion kit.




Only for use on existing caliper type hubs as used on Cooper S, 1275GT and all Minis from 1984 on. Requires 12" or 13" wheels to fit. The calipers are our alloy 4pot type

see kit [l...

Metro Turbo Vented Brake conversion kit.

Includes all parts to convert to Turbo brakes from drums. Car must be fitted with 12" wheels to fit.

Included in kit are hubs, bearings cv joints, swivel pins, brake discs, drive

fl...

People also bought products

Set of 4 hoses, 2 front and 2 rear.

Braided brake and clutch hoses have a PTFE inner which helps to eliminate the spongy pedal feel under arduous conditions, and give greater efficiency. The outer braided stainless steel cover e...

Set of 6 hoses, 4 front and 2 rear to fit the ERA turbo.

Braided brake and clutch hoses have a PTFE inner which helps to eliminate the spongy pedal feel under arduous conditions, and give greater efficiency. The outer braided st...

We now supply 2 easy bend copper nickel pipes with the correct unions for when converting to the later type GMC227 front to rear split master cylinder.

Correct size and length brake pad pin for the caliper using 8.4" disc size and vented calipers.

Brake pipe with male metric ends, 12mm for master cylinder and 10mm for PDWA valve. fits in the bottom union and goes to left hand union in valve (to go to rear brakes)

Road use pads but for performance use C-AHT223GREEN these are original size 2.375" which fit later 997 cooper- but if you have the very early small pad type, 2.125" wide for 997cc less split pin holes, these are nearly obsolete you can g...

Brake pipe with male metric ends, 12mm for master cylinder and 10mm for PDWA valve

As the original brake pipe kit is now obsolete, we now supply 2 easy bend copper nickel pipes with the correct unions for when converting to the later type GMC227 front to rear split master cylinder.

For use on 8.4" wide standard brake disc calipers, 2.920"wide.

This is the Ultimax upgrade which produces less brake dust which destroys alloy wheels. For the upgraded version of this see C-AHT16GREEN.

A set of split pins are availa...

A great street upgrade for 4 pot calipers giving off less brake dust and better efficiency.A set of split pins and metal retaining clips are available as GBK1025

Our favourite pads as the give less brake pad dust which destroys alloy wheels.

Very durable and great for most road usage. The green upgrade for fast street is C-8G8995GREEN.

Less Brake Dust and better stopping power!! The best pad available seems to be the only pad set available now as Rover/Unipart etc have all deleted it from their range

the finest brake pad available for mini 8.4" discs or Sprite/Midget cars.

These are for all forms of competition road use.

A set of split pins are available as GBK1010 or with metal retaining clips as GBK1026

For Cooper S 7.5" wide discs these are our favourite road brake pads as the reduce contamination on alloy wheels by virtue of less brake pad dust, plus they work well with good anti fade properties.

For use with 4 pot calipers as per Metro or Minispares own alloy type these are our favourite road brake pads as the reduce contamination on alloy wheels by virtue of less brake pad dust, plus they work well with good anti fade properties. A set of s...

Split diagonal saloon without 4 way valve, fits L/H/D and R/H/D.

Van and Estate version is GB5007.



You'd think that the way Minis leak oil they'd never rust on the underside, but they do! If your Mini is rusty below it is ...

Single line L/H/D - dry suspension - no servo fitted. If you have drum brakes and a servo you should use GL4992 plus 2 of HF10.

These kits or pipes are approx 35% off retail.

Cooper S 7.5" complete brake disc kit, except for disc shields, with Mini Spares own cast standard calipers. If you want or have 10" wheels this is the kit to convert from drum brakes to discs brakes.

This kit includes every nut bolt and co...

12" wheel to 10" wheel running gear conversion kit. Less wheels.

This kit will convert your 8.4 disc set up to the Cooper S 7.5 discs to allow fitment of 10" wheels, kit includes discs, calipers, kevlar pads with split pins and drive flanges...