(47,97 €) £47.97 exc vat
(57,56 €) £57.56 inc vat
In stock
(47,97 €) £47.97 exc vat
(57,56 €) £57.56 inc vat
In stockRecommended usage 1 x SF669 to fit one mini.
3 point automatic rear seat belt. These seat belts do not use the standard C post nor the MPI fixing in the rear pocket. They require the fitting of the real on to the parcel shelf. These seat belts will work for all minis up to 1996
<...
3 point automatic rear seat belt. These seat belts do not use the standard C post nor the MPI fixing in the rear pocket. They require the fitting of the real on to the parcel shelf. These seat belts will work for all minis up to 1996.
...
Auto retractable seat belt kit. Sold per seat. The manufacturer states that these belts are direct replacements for the pre tensioner types fitted in Europe.
It will arrest the wearer within the same tolerances without a need for a...
Auto retractable seat belt kit. Sold per seat. The manufacturer states that these belts are direct replacements for the inertia reel type fitted from 1976 including the later pre tensioner type. Not suitable for MK1/2 saloons and vans/pickups due to...
Front seat squab foam.This squab foam can be used for most models from 1980 to 1992/93 seat with single post head rest. C708 is the diaphragm for this.
This squab was used exclusively on minis 1985-1992 before the introduction o...
Front seat base foam.This cushion can be used for most models with single pole headrest from 1985-92 before the introduction of moulded seats. It is approx. 2" thick with raised sides and deeper version of SF3010 which it replaced to giv...
MODERN TYPE FOAM CUSHION CUT PRECISELY TO SHAPE READY TO RECEIVE NEW SEAT COVER.FOAM IS READY TO ACCEPT NEW SEAT COVER WHICH IS GLUED TO THE TOP SURFACE, THEN THE SEAT SKIRTS ARE TURNED OVER THE EDGES AND AGAIN GLUED IN PLACE. SUGGEST CHEMICAL BASED ...
This base foam was used on the Saloon models of this period. The main foam has a foam topper on the front edge to give thigh support!! It also gives the front of the seat character.
This cushion was used on the majority of MK.I front seats.It is about 2" thick and has an extra 1" thick piece that can be glued to the front edge to give the seat cover definition and also support for your legs!
This wire strap type was fitted from 1974 as standard, but this will fit all minis from 1959 to 1995. 36cm x 29.5cm
Also used for other trim areas this clip holds the vinyl or fabric of the seat covers to the metal framework.This part has larger D shape and claw spikes but if you want the smaller D shape and claws for headlining and rear seat covers see[link]14A80...
Seat Spacers.
If you think you are too tall for the Mini. These brackets allow you to really stretch out.
The clips that hold the seat squab vinyl to the frame on front seats and the headlining. These clips are available seperately as GHF1500.
The full rubber style seat diaphragm for early cars 1962-70. This one-piece rubber seating includes mounting clips. Many fit this to later cars as well although a wire strap type CZH3508MS is also available. The clips are also available ...
High Quality red tufted carpet set, fits all saloon RHD Models
Our lightweight underfelt kit is the perfect companion when fitting a new headlining. Made from lightweight felt and cut to size, this fits into the cavity of the roof before fitting your new headlining and provides increased sound insulation and pro...
Cream crackle with mirror and one arm,uses GFK7344 clip on one end, fitted from Oct 1964 to 1965, left hand side for right hand drive.
Cream crackle less mirror WITH ONE ARM and uses GFK7344 clip on one end,fitted from Oct 1964 to 1965
Black with mirror, optional colour aftermarket sun visor for Mk3 models which were thinner than pre 1965 cars for safety requirements. Will fit cars from December 1965 on. Check out the special clips to hold these visors as they are sold seperately ...
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.