SEAT STRAPPING WIRES MINI FRONT SEAT. SQUAB DIAPHR...
C708

£47.45 exc vat

£56.94 inc vat

In stockIn stock
This is the diaphragm for the seat squab, the part your back sits against on cars from 1960-92 pre headrest types with twin posts

£47.45 exc vat

£56.94 inc vat

In stockIn stock

Recommended usage 2 x C708 to fit one mini.
Seats and Interior Trim Cooper & 'S' MK1 1961-67 - Qty 2
Seats and Trim-Mini Saloon MK4-1976-1985 - Mini Cl - Qty 2
Seats and Trim - Mini Clubman Estate 1970-1982 - Qty 2
Seats and Trim - Mini 1275GT - 1969-1980 - Qty 2
Seats and Trim - Mini Traveller MK1 - 1961-1967 - Qty 2
Fleck Seats and Trim - Mini MK1 Saloons 1959-1961 - Qty 1
Seats and Interior Trim MK1 Saloons 1961-67 - Qty 2
Seats and Trim - Mini Cooper 1990-1996 - Pre MPI - Qty 1
Seats and Trim - Mini Cooper 1990-1996 - Pre MPI - Qty 1

People also bought products

Fresh air vent for the dash, these bolt to the bulkhead and the eyeball socket vents fit into them. These used to be handed but this vent has both hole patterns so will fit both sides. This replaces 37H7035, 37H7036, JJB101000 and JJB101010. Sold ind...

We are now able to offer the origianl style 1 piece moulded carpets as fitted to 1997-2000 cars, these come supplied with the underlay although it is available separately under part number CK907. You could fit this carpet to any rod change Mini with ...

Seat front base foam replacement. Moulded foam base and only one available solely from us, has been used on 1993 to 2000 cars. Made from sample from Rover of HGA100840

Our lightweight underfelt kit is the perfect companion when fitting a new headlining. Made from lightweight felt and cut to size, this fits into the cavity of the roof before fitting your new headlining and provides increased sound insulation and pro...

Auto retractable seat belt kit. Sold per seat. The manufacturer states that these belts are direct replacements for the pre tensioner types fitted in Europe.



It will arrest the wearer within the same tolerances without a need for a...

Auto retractable seat belt kit. Sold per seat. The manufacturer states that these belts are direct replacements for the inertia reel type fitted from 1976 including the later pre tensioner type. Not suitable for MK1/2 saloons and vans/pickups due to...

FIA spec anchor plate for eye bolts, used when fitting harnesses. Sold individually, 7/16 UNF 65x65x3mm.

Black door pocket liner for the R/H door which has sliding windows and external hinges

Black door pocket liner for the L/H door which has sliding windows and external hinges

Plain white with white backing aftermarket sun visor as fitted to Mk3 models 1977-92 which were thinner than Mk1 for safety crushing requirements. Although not standard for earlier models will fit cars from December 1965. Check out the special clips ...

Front seat squab foam.This squab foam can be used for most models from 1980 to 1992/93 seat with single post head rest. C708 is the diaphragm for this.

This squab was used exclusively on minis 1985-1992 before the introduction o...

Front seat base foam.This cushion can be used for most models with single pole headrest from 1985-92 before the introduction of moulded seats. It is approx. 2" thick with raised sides and deeper version of SF3010 which it replaced to giv...

Cream with crackle finish sun visor fitted as standard from December 1965-69 but will fit Mk3 on if required. With mirror for passenger side. For a car set of clips see SV2021

Mk1/2 1965 on cream crackle SV2017C

Mk3 196...

Light grey plastic 6" mirror fitted by BMC as standard from October 1964-69.

The first light grey plastic 6" mirror with a twin ball stem and black sucker was patented in 1962 but not fitted until October 1964. At the end of 1965 the twin ba...

Special clip for the lower brightwork moulding 14A8009 for finishing off the lower dash, crash pad rail, or on earlier cars the painted metal surface of the panel which holds the switch panel section.

The moulding 14A80...

Black vinyl dash liners suitable for 2 and 3 clock clubman type dash with the offset clocks (Left hand Drive).Vinyl will need cutting out for vent holes but the cardboard backing is pre cut.

Black with mirror, optional colour aftermarket sun visor for Mk3 models which were thinner than pre 1965 cars for safety requirements. Will fit cars from December 1965 on. Check out the special clips to hold these visors as they are sold seperately ...

Complete car set of roof lining rods, comprising of 1 Red, 2 White, 1 Black, 1 Blue and 1 Yellow

number 1 with red ends is EEB100060

number 2 and 3 is white ends are both EEB100070

number 4 with black ends is EEB100080
...

In 1993 the seat frames were changed and although the base frame looks very similar to earleir models, there is a difference in the shape. At this time the seat diaphragm was changed to a special rubber/woven design known as the "Suisiara" model. The...

This is a two piece headlining material for clubman estate in white--most early were grey however. In 1980 they reverted to a one piece headlining HL3023.