CHECK ARM RUBBER GROMMET N/S 1970-1986

Moulded shape type left hand door stay grommet fitted until 1985 when it was replaced by a flat sponge type seal CGE10038/9.

£2.56 exc vat

£3.07 inc vat

CHECK ARM SEAL R/H 1986 ON

CGE10038

Sponge type seal on R/H A post of all minis with wind up window type doors to protect from water running down into body. A part you must keep your eye on to stop rust, if the sponge is gettig hard then replace it.

£3.50 exc vat

£4.20 inc vat

DOOR CHECK STRAP MK III ONWARDS NON GENUINE

ADA5671MS

High quality non genuine door check strap for MK3 cars with wind up window doors (use with retaining pin CLZ412). Beware there are cheap copies on the market that are poor quality and when fitted to our cars did not function correctly!

£7.50 exc vat

£9.00 inc vat

DOOR GLASS RAIL SUPPORT N/S/F & O/S/R IN STAINLESS...

ALA5747SS

Genuine Mini Spares Mk3 window drop frame in stainless steel. Supplied with the rubber seal.

£16.50 exc vat

£19.80 inc vat

DOOR GLASS RAIL SUPPORT O/S/F & N/S/R IN STAINLESS...

ALA5746SS

Genuine Mini Spares Mk3 window drop frame in stainless steel. Supplied with the rubber seal.

£16.50 exc vat

£19.80 inc vat

SQUARE DOOR STRIKER GASKET

FRG10002

The gasket that sits behind the door stiker on all wind up window type minis

on the B post.

£1.00 exc vat

£1.20 inc vat

MK1/2 DOOR CHECK STRAP FITTING KIT

ALE1221FK

Complete fitting kit for the door check straps on all Minis fitted with external hinges.

£29.52 exc vat

£35.42 inc vat

MK 1/2 EXTERNAL HINGE ANGLED SPACER

14A7387

Angled spacer washer for Mk1/2 external door hinge cars for the upper hinge

£0.90 exc vat

£1.08 inc vat

DOOR STRIKER PLATES STAINLESS STEEL PAIR

CZG5254SS

Stainless steel version of CZG5254 door striker plate. These used to be sided on earlier models but now fit either side. CZH627 striker plate lock with a loop fits into this. Supplied in pairs with stainless steel fixing scr...

£11.63 exc vat

£13.96 inc vat

DOOR HINGE SHIM 0.7mm THICK STAINLESS STEEL

ALA6383

Door hinge shim for all wind up window cars, these are used to align the doors, 0.7mm thick and made in stainless steel, use with ALA6382 to get good door alignment. See ALA6381 for thicker rear support plate.

£1.76 exc vat

£2.11 inc vat

MK3 DOOR HINGE SHIM 1.2mm THICK STAINLESS STEEL

ALA6382

Door hinge shim for all wind up window cars, these are used to align the doors, 1.2mm thick and made in stainless steel use, with ALA6383 to get good door alignment See ALA6381 for thicker rear support plate.

£1.76 exc vat

£2.11 inc vat

SCREW FOR MK3 DOOR HANDLE

PMZ306

This screw can used to hold together the 2 halves of the disc shields on all

mini front discs. fits MK1/2 door escutcheons.

Use SE910161 and cut down to 3/8" long including head

PMZ306 was originally 3/8"long u...

£0.30 exc vat

£0.36 inc vat

DOOR HANDLE KIT WITH BOOT HANDLE 1966 ON Mk1 & Mk2

24A2083KIT

Full Mk2 door handle set with 2 front door locking handles and boot handle with matching keys. Fitted from 1966 with the intoduction of the door safety escutcheon boss. This boss is available as 24A1834 and gasket 24A1835.

Regre...

£120.00 exc vat

£144.00 inc vat

WIND DEFLECTORS FOR FRONT DOORS WIND UP WINDOW TYP...

MSA1102

A great accessory for wind up window minis. Fitted in minutes to make such a difference driving your Mini with the window open. Wonderfull for those that smoke or love fresh air. In a tinted colour to stop bad reflections.

£53.49 exc vat

£64.19 inc vat

DOOR SEAL UPPER L/H TWIN POINT CARS 1996on

CFB101130

Twin point injection cars had a split seal system door frame seal for the front doors,the lower acting as a shield cover for the trim, fitted from chassis no BD134455 ON

Some customers have replaced it by the one piece CGA2835MS<...

£16.50 exc vat

£19.80 inc vat

DOOR SEAL UPPER R/H TWIN POINT CARS 1996on

CFB101120

Twin point injection cars had a split seal system door frame seal for the front doors,the lower acting as a shield cover for the trim. fitted from chassis no BD134455 ON

Some customers have replaced it by the one piece CGA2835MS<...

£16.50 exc vat

£19.80 inc vat

DOOR SEAL LOWER L/H TWIN POINT CARS 1996on

CFB101090

Special lower seal--fitted to MPI cars from October 1996 show cars chassis no BD134455 ON

Has a lip on inner edge to hold carpet back and tidy internal trim but other than that the CGA2835MS will fit --the full set is

£24.00 exc vat

£28.80 inc vat

DOOR SEAL LOWER R/H TWIN POINT CARS 1996on

CFB101080

Special lower seal--fitted to MPI cars from October 1996 show cars chassis no BD134455 ON

Has a lip on inner edge to hold carpet back and tidy internal trim but other than that the CGA2835MS will fit --the full set is

£24.00 exc vat

£28.80 inc vat

WINDOW DROP GLASS RUBBER SEAL TO REGULATOR FRAME

24A948

The rubber that sits in the frame to hold the windows on wind up window type doors. The frames are ALA5746/7 or see MSSK2105 also used on Clubman Estate and Traveller rear windows in the finger pull grips.

Sold individually.2 pe...

£2.60 exc vat

£3.12 inc vat

DOOR HINGE LOWER FOR BOTH SIDES MK3 ON

CZH212MS

Lower internal door hinge for either side.

Fits all wind up window type doors from 1970 on.

£14.40 exc vat

£17.28 inc vat

DOOR HINGE L/H UPPER MK3

CZH203MS

upper door hinge l/h for wind up window type door with internal hinge 1970on

this is not a genuine part and is available in a car set kit MSSK017B

See CZH203 for genuine

£14.40 exc vat

£17.28 inc vat

DOOR HINGE R/H UPPER MK3

CZH202MS

Non genuine hinge for R/H upper on wind up window type doors with internal hinges from 1970on. See kit MSS017B for better price.

£14.40 exc vat

£17.28 inc vat