PINION "C" SHIM .004"

The shims go against the mainshaft double roller bearing securing cap in your gearbox to give it pre load. See workshop manual for advice but you are aiming for only 1 thou pre load.

£0.79 exc vat

£0.95 inc vat

THRUST WASHER LATE LAYGEAR .127-129"

DAM3182

£10.25 exc vat

£12.30 inc vat

IDLER GEAR SHIM 134/.135" (YELLOW)

DAM4823

These are the later A+ type spec which rover superseded to when upgrading the idler gear material on injection cars. See workshop manual for shimming details

Quantity required is 2 per gearbox but the idler gear requires shimming for correct...

£16.80 exc vat

£20.16 inc vat

PINION "C" SHIM .004"

GUG705646GM

The shims go against the mainshaft double roller bearing securing cap in your gearbox to give it pre load. See workshop manual for advice but you are aiming for only 1 thou pre load.

£0.79 exc vat

£0.95 inc vat

IDLER GEAR SHIM .136/.137" (RED)

DAM4824

These are the later A+ type spec which rover superseded to when upgrading the idler gear material on injection cars. See workshop manual for shimming details.

The idler gear in all Mini power units must be set with great care. The thrust wa...

£16.80 exc vat

£20.16 inc vat

IDLER GEAR SHIM .136/7" BLUE

22A1548

Idler gear shims for the Pre A Plus gearboxes with 0.750" (19mm) size shafts

Quantity required per gearbox is 2 but idler gear shims require shimming for correct clearance 3-6 thou as per workshop manuals but 3 thou for road and 4 thou for r...

£13.50 exc vat

£16.20 inc vat

BRONZE THRUST WASHER FOR PLANET WHEEL PRE A+

2A7062

The bronze washer for the planet gears in the differential for pre A plus gearbxes. You can use the DAM5071 and cut the lips off.

£2.22 exc vat

£2.66 inc vat

IDLER GEAR SHIM .132/3"BLACK

22A1546

Idler gear shims for the Pre A Plus gearboxes with 0.750" (19mm) size shafts.

Quantity required per gearbox is 2 but idler gear shims require shimming for correct clearance 3-6 thou as per workshop manuals but 3 thou for road and 4 thou for ...

£13.50 exc vat

£16.20 inc vat

IDLER GEAR SHIM .134/5"WHITE

22A1547

Idler gear shims for the Pre A Plus gearboxes with 0.750" (19mm) size shafts

Quantity required per gearbox is 2 but idler gear shims require shimming for correct clearance 3-6 thou as per workshop manuals but 3 thou for road and 4 thou for r...

£13.50 exc vat

£16.20 inc vat

IDLER GEAR SHIM .138/9" RED

22A1549

Idler gear shims for the Pre A Plus gearboxes with 0.750" (19mm) size shafts

Quantity required per gearbox is 2 but idler gear shims require shimming for correct clearance 3-6 thou as per workshop manuals but 3 thou for road and 4 thou for r...

£13.50 exc vat

£16.20 inc vat

IDLER GEAR SHIM .132/33" A+ (NO COLOUR)

DAM4822

These are the later A+ type spec which rover superseded to when upgrading the idler gear material on injection cars.see workshop manual for shimming details.

Quantity required per gearbox is 2 but idler gear requires shimming for correct cle...

£16.80 exc vat

£20.16 inc vat

LAYSHAFT THRUST WASHER LATE A PLUS .124-126"

DAM3181

smaller of the 2 shims at the ends of the laygear on the layshaft. These are sized accordingly and fit the first gear end --See DAM3180/1/3 for alternative sizes

£10.25 exc vat

£12.30 inc vat

DIFF SHIM 6 THOU

DAM3108

You will need to shim up your diff bearings with these washers as required. See workshop manuals for details. See also DAM3109 & DAM3633.

£0.79 exc vat

£0.95 inc vat

IDLER GEAR SHIM A PLUS SHIM KIT(5 SHIMS)

DAM4821

This kit contains 1 each of 3 alternative sizes plus 2 of the standard size shim

for shimming idler gear on A Plus idler gears. These are the later type spec

which rover superseded to when upgrading the idler gear material on inject...

£78.75 exc vat

£94.50 inc vat

THRUST WASHER LATE A PLUS .121-123"

DAM3180

Smaller of the 2 shims at the ends of the laygear on the layshaft. These are sized accordingly and fit the first gear end--See DAM3180/1/3 for alternative sizes.

£10.25 exc vat

£12.30 inc vat

IDLER GEAR SHIM .130/1"GREEN

22A1545

Idler gear shims for the Pre A Plus gearboxes with 0.750"(19mm) size shafts

Quantity required per gearbox is 2 but idler gear shims require shimming for correct clearance 3-6 thou as per workshop manuals but 3 thou for road and 4 thou for ra...

£13.50 exc vat

£16.20 inc vat

DIFF SHIM 10 THOU

DAM3109