DIFF SHIM 6 THOU
DAM3108

£0.79 exc vat

£0.95 inc vat

In stockIn stock
You will need to shim up your diff bearings with these washers as required. See workshop manuals for details. See also DAM3109 & DAM3633.

£0.79 exc vat

£0.95 inc vat

In stockIn stock

Recommended usage 2 x DAM3108 to fit one mini.
Differential - Qty 1
Differential Assembly - Qty 1

Recommended products

Drive shaft oil seal or diff output shaft oil seal for all Mini's except Cooper S and early Automatics. 2 required per gearbox.

Upgraded version in Viton available us ADU5738VITON

Try these GENUINE MINISPARES superseal gearbox output shaft gaskets specially made to try and eliminate leaks.

Sold singly,2 per gearbox

Gearbox output shaft housing gasket for all minis except auto.

Sold singly 2 required per gearbox.

Genuine RHP as originally fitted to every production Mini.

Two of these main diff carrying bearings are required in the gearbox and this new steel caged type fits either way round. Should be pre loaded by 1-2 thou.

Some original fi...

Alternative products

See DAM3108 also for smaller diff shims. Refer to workshop manual for fitment.

Kit products

Mini Spares Close ratio Evolution five speed "A" Plus Rod-change helical cut teeth gearbox has been in production since 1993 with phenomenal proven reliability. Do not use a quick shift gear lever with this gearbox

Suitable for 1275-1380cc(e...

Best of both worlds - acceleration and easy cruising - with this Mini Spares Evolution five speed "closer ratio gearbox and cross pin diff".

Mini Spares Close ratio Evolution five speed "A" Plus Rod-change helical cut teeth gearbox has bee...

New for 2023, special heavy duty 2nd and 3rd gears with laygear and 1st motion to match giving a quiet road box suitable for engines producing upto 125lbft of torque on naturally aspirated engines.



Ratios are:



1s...

This gearbox is identical to MSG05 except for a 3.2 final drive which effectively gives you a final drive ratio of 2.82 in 5th.

Do not come with input gear supplied.

Surcgharge on old unit £400+ VAT

This gearbox is identical to MSG04 except for a 3.2 final drive which effectively gives you a final drive ratio of 2.822 in 5th.

Does not come with input gear supplied.

This gearbox is identical to MSG05 except for a 3.1 final drive which effectively gives you a final drive ratio of 2.73 in 5th.

Does not come with input gear supplied.

This gearbox is identical to MSG04 except for a 3.1 final drive which effectively gives you a final drive ratio of 2.73 in 5th.

Do not come with input gear supplied.

Mini Spares Close ratio Evolution five speed "A" Plus Rod-change helical cut teeth gearbox has been in production since 1993 with phenomenal proven reliability. Do not use a quick shift gear lever with this gearbox

Suitable for 1275-1380cc(e...

New for 2023, special heavy duty 2nd and 3rd gears with laygear and 1st motion to match giving a quiet road box suitable for engines producing upto 125lbft of torque on naturally aspirated engines.



Ratios are:



1s...

New for 2023, special heavy duty 2nd and 3rd gears with laygear and 1st motion to match giving a quiet road box suitable for engines producing upto 125lbft of torque on naturally aspirated engines.



Ratios are:



1s...

New for 2023, special heavy duty 2nd and 3rd gears with laygear and 1st motion to match giving a quiet road box suitable for engines producing upto 125lbft of torque on naturally aspirated engines.



Ratios are:



1s...

New for 2023, special heavy duty 2nd and 3rd gears with laygear and 1st motion to match giving a quiet road box suitable for engines producing upto 125lbft of torque on naturally aspirated engines.



Ratios are:



1s...

New for 2023, special heavy duty 2nd and 3rd gears with laygear and 1st motion to match giving a quiet road box suitable for engines producing upto 125lbft of torque on naturally aspirated engines.



Ratios are:



1s...

New for 2023, special heavy duty 2nd and 3rd gears with laygear and 1st motion to match giving a quiet road box suitable for engines producing upto 125lbft of torque on naturally aspirated engines.



Ratios are:



1s...

New for 2023, special heavy duty 2nd and 3rd gears with laygear and 1st motion to match giving a quiet road box suitable for engines producing upto 125lbft of torque on naturally aspirated engines.



Ratios are:



1s...

People also bought products

These are the later A+ type spec which rover superseded to when upgrading the idler gear material on injection cars. See workshop manual for shimming details

Quantity required is 2 per gearbox but the idler gear requires shimming for correct...

The shims go against the mainshaft double roller bearing securing cap in your gearbox to give it pre load. See workshop manual for advice but you are aiming for only 1 thou pre load.

These are the later A+ type spec which rover superseded to when upgrading the idler gear material on injection cars. See workshop manual for shimming details.

The idler gear in all Mini power units must be set with great care. The thrust wa...

Idler gear shims for the Pre A Plus gearboxes with 0.750" (19mm) size shafts

Quantity required per gearbox is 2 but idler gear shims require shimming for correct clearance 3-6 thou as per workshop manuals but 3 thou for road and 4 thou for r...

The bronze washer for the planet gears in the differential for pre A plus gearbxes. You can use the DAM5071 and cut the lips off.

Idler gear shims for the Pre A Plus gearboxes with 0.750" (19mm) size shafts.

Quantity required per gearbox is 2 but idler gear shims require shimming for correct clearance 3-6 thou as per workshop manuals but 3 thou for road and 4 thou for ...

Idler gear shims for the Pre A Plus gearboxes with 0.750" (19mm) size shafts

Quantity required per gearbox is 2 but idler gear shims require shimming for correct clearance 3-6 thou as per workshop manuals but 3 thou for road and 4 thou for r...

Idler gear shims for the Pre A Plus gearboxes with 0.750" (19mm) size shafts

Quantity required per gearbox is 2 but idler gear shims require shimming for correct clearance 3-6 thou as per workshop manuals but 3 thou for road and 4 thou for r...

These are the later A+ type spec which rover superseded to when upgrading the idler gear material on injection cars.see workshop manual for shimming details.

Quantity required per gearbox is 2 but idler gear requires shimming for correct cle...

smaller of the 2 shims at the ends of the laygear on the layshaft. These are sized accordingly and fit the first gear end --See DAM3180/1/3 for alternative sizes

This kit contains 1 each of 3 alternative sizes plus 2 of the standard size shim

for shimming idler gear on A Plus idler gears. These are the later type spec

which rover superseded to when upgrading the idler gear material on inject...

Smaller of the 2 shims at the ends of the laygear on the layshaft. These are sized accordingly and fit the first gear end--See DAM3180/1/3 for alternative sizes.

Idler gear shims for the Pre A Plus gearboxes with 0.750"(19mm) size shafts

Quantity required per gearbox is 2 but idler gear shims require shimming for correct clearance 3-6 thou as per workshop manuals but 3 thou for road and 4 thou for ra...

2 thou shims to go against the mainshaft double roller bearing securing cap in your gearbox to give it pre load. See workshop manual for advice but you are aiming for only 1 thou pre load--these were sold by Unipart as 3 thou but the Rover drawing we...

These are the later A+ type spec which rover superseded to when upgrading the idler gear material on injection cars. See the idler gear in all Mini power units must be set with great care. The thrust washer comes in various thickness to allow for acc...

See DAM3108 also for smaller diff shims. Refer to workshop manual for fitment.

Primary gear thrust washers are made in varying sizes to take up the play.

Standard gap size should be between 3-6 thou. See DAM6486, DAM6487, DAM6488, DAM6490, DAM6492 for alt...

Laygear thrust washer on 4th gear end which is one size only. The first gear end is the adjustable laygear washer end but these are obsolete on Pre A plus layshafts. This one fits all 4 synchro gearboxes.