REAR SEAT BASE FOAM 1959-1967
SF671

£90.00 exc vat

£108.00 inc vat

In stockIn stock
This base foam was used on the Saloon models of this period. The main foam has a foam topper on the front edge to give thigh support!! It also gives the front of the seat character.

£90.00 exc vat

£108.00 inc vat

In stockIn stock

Recommended usage 1 x SF671 to fit one mini.
Fleck Seats and Trim - Mini MK1 Saloons 1959-1961 - Qty 1
Seats and Interior Trim MK1 Saloons 1961-67 - Qty 1

People also bought products
SEAT BACK FOAM UPRIGHT 1959-1980
SF669

Fitted to all saloons of this period. Shaped to the original design but made in modern day specification foam. The cushion is placed over the rear seat frame and the turned ends glued to follow the shape of the frame. The seat cover is then situated ...

£47.97 exc vat

£57.56 inc vat
SEAT BASE FOAM CUSHION ASSEMBLY 1959-1967
SF659

This cushion was used on the majority of MK.I front seats.It is about 2" thick and has an extra 1" thick piece that can be glued to the front edge to give the seat cover definition and also support for your legs!

£39.36 exc vat

£47.23 inc vat
SEAT PIVOT BRACKET
24A1495

Bracket on the crossmember that holds the seat.

2 required per seat.

£8.40 exc vat

£10.08 inc vat
HEADLINING AND SEAT COVER CLIP SET (20 per set)
C707

The clips that hold the seat squab vinyl to the frame on front seats and the headlining. These clips are available seperately as GHF1500.

£4.96 exc vat

£5.95 inc vat
HIGH QUALITY CARPET SET TUFTED SALOON CARPET RED R...
HMP641302

High Quality red tufted carpet set, fits all saloon RHD Models

£143.00 exc vat

£171.60 inc vat
HEATER KNOB MK1
24A151

plastic heater knob that pushes on the end of the control lever on Mk1/2 heaters. one required per car.

£2.94 exc vat

£3.53 inc vat
SUNVISOR CLIP SIDE
ADA4484

Sun visor side clip for cars from 1964-5 with first plastic type rear view mirror and black sucker. The visor had one arm held in another plastic clip on the front which is GFK7344

£5.91 exc vat

£7.09 inc vat
CLIP FOR 14A8009 MOULDING
14A8010

Special clip for the lower brightwork moulding 14A8009 for finishing off the lower dash, crash pad rail, or on earlier cars the painted metal surface of the panel which holds the switch panel section.

The moulding 14A80...

£1.22 exc vat

£1.46 inc vat
INTERIOR LAMP LENS ALL MINI PRE 74
17H9971

Interior lamp (dome lamp) lens. Fitted from 1959 to 1974 (mk 1 2 3).

Fits our 14A9148 and 13H4398 lamps

£3.63 exc vat

£4.36 inc vat
CARPET CLIP BRACKET
14A9065

BRACKET ON FLOOR TO TAKE CARPET CLIPS

£1.00 exc vat

£1.20 inc vat
REAR GLOVE BOX MOULDING RH
ALA5828

Rear Alloy Brightwork moulding for the interior rear companion box R/H.

deleted for EMB10013 plastic in 1991

£10.11 exc vat

£12.13 inc vat
BOOT BOARD BRACKET SET 5.5 gallon tank (CK948 Equ...
CCC115

This kit contains all the brackets and mounts that were fitted on to the floor on original Coopers, Wolseley Hornet and Riley Elf with boot boards fitted as standard.

This kit does not include the bracket on the boot board 14A9783

£39.44 exc vat

£47.33 inc vat
INDICATOR LENS. END OF STALK. MK1 ONLY
47H5200

Mk1 Mini Indicator stalk green lens. Also fitted to other BMC variants such as Morris Minor. See GLB280 for the replacement bulb

£1.30 exc vat

£1.56 inc vat
CHROME ASHTRAY WITH FLUTED TOP
8D2490

Favourite old ashtray for MK1/2 minis with the fluted top for the rear glovebox and facia. Fitted to minis with painted top dash rail from 1959-85.

See 24A1538 also for flat lid version as fitted when top dash rail is vinyl cove...

£14.32 exc vat

£17.18 inc vat
MK1 HORN PUSH ASSEMBLY WITH AUSTIN CENTRE MOTIF
27H6943

Horn push assembly for the Mk1 Austin Mini, Mk1 Austin Mini Cooper and Mk1 Austin Mini Cooper S.

For Morris cars, see 27H6944. This horn push assembly can also be supplied without a centre emblem, see 27H6945

£54.00 exc vat

£64.80 inc vat
GENERAL PURPOSE SPRAY ADHESIVE 500ML (COLLECTION O...
FELT860

This is the top of the range spray glue that is used to make all our trim products. We recommend you use spray glue to fit your trim products to your car (where applicable). You can use the glue to fit underfelt and carpets to your floor pan, your fo...

£6.02 exc vat

£7.22 inc vat
SPEEDO COWLING OVAL TRIM
14A9907

Bezel for 24A2702 oval 3-gauge pod. This is the brightwork trim on the front of the plastic pod, it is held on with up to 14 whisker clips 14A9796. The clip to join the ends together for neatness is 24A472
<...

£20.15 exc vat

£24.18 inc vat
OUTER DOOR WEATHERSTRIP CLIP (SINGLE)
ADH3809

Lower moulding clip for wind up window mouldings..4 PER SIDE required but sold singly-Fits CZH1666/7 and PAM1014/5

Also used for 24A1169 glove box moulding MK1/2.

£0.40 exc vat

£0.48 inc vat
CLIP FOR CENTRE BINNACLE FINISHER (14 REQUIRED)
14A9796

These are the little 'whisker clips' that hold the 14A9907 bezel on the front of the oval 3-instrument gauge pod 24A2702. The 'ears' slot into the back of the bezel and the tails that stick out go thru one of 14 holes in the...

£2.10 exc vat

£2.52 inc vat
IGNITION SWITCH DASH MOUNTED
13H337

MK1/2/EARLY MK3. 3 position spring loaded type. Comes with barrel.

For barrel only use part number 24G1345.

£8.56 exc vat

£10.27 inc vat