(¥108) £107.60 exc vat
(¥129) £129.12 inc vat
In stock
These require special bedding in and fitting intructions are available if new to this type of pad for racing.
(¥108) £107.60 exc vat
(¥129) £129.12 inc vat
In stockRecommended usage 1 x C-STR987 to fit one mini.
Road use pads but for performance use C-AHT223GREEN these are original size 2.375" which fit later 997 cooper- but if you have the very early small pad type, 2.125" wide for 997cc less split pin holes, these are nearly obsolete you can g...
A great street upgrade for 4 pot calipers giving off less brake dust and better efficiency.A set of split pins and metal retaining clips are available as GBK1025
Less Brake Dust and better stopping power!! The best pad available seems to be the only pad set available now as Rover/Unipart etc have all deleted it from their range
For Cooper S 7.5" wide discs these are our favourite road brake pads as the reduce contamination on alloy wheels by virtue of less brake pad dust, plus they work well with good anti fade properties.
For use with 4 pot calipers as per Metro or Minispares own alloy type these are our favourite road brake pads as the reduce contamination on alloy wheels by virtue of less brake pad dust, plus they work well with good anti fade properties. A set of s...
Set of alternative pads for use with 7.5" wide discs.
From Mintex the developers and manufacturers of mini braking systems as per GBP103AF from Xpart now.
Brake pads for 8.4" diameter brake dics, with single pot calipers as fitted to all Minis 1984 on, later 1275GT and Spridget. In C-TECH M1144.
General: Competition only pads. Not for road use.
Improvements in braking efficiency can b...
Mintex brake shoes for the rear of all minis which are 1.25" wide. Also fitted to front on early single leading shoe cars (dry suspension pre 1964) with a single wheel cylinder. Manufactured by Mintex and sold as a box set of 4 brake shoes for one re...
Take the squeal out of your discs-late model Mini or Spridget.
Set of 4 Brake pads from the original manufacturer Delphi for the 8.4" wide disc fitted as standard to minis from 1984on with 2.920" pad width.
A set of split pins are available as GBK1010 or with metal retaining clips as [link]...
For those old original drum brakes on the front of a mini with 1.5" wide type fitted. Some pre 1964 dry suspension had the smaller rear type 1.25" wide fitted the same as the rear. After Unipart's demise our stock from Oct 1st will be Mintex as used ...
Mintex MRM1802 (formerly M1144) pads for Metro Turbo calipers. Competition only pads, not for road use.
A set of split pins and metal retaining clips are available as GBK1025
For 7" diameter brake disc as fitted to 998cc Cooper. In C-TECH M1144.
General:
Improvements in braking efficiency can be achieved to a certain degree by replacing the standard asbestos free brake pads/shoes with alternative...
Cooper S carbon Metallic Pad set of 4. - For race use
Set of 6 hoses, 4 front and 2 rear to fit the ERA turbo.
Braided brake and clutch hoses have a PTFE inner which helps to eliminate the spongy pedal feel under arduous conditions, and give greater efficiency. The outer braided st...
NICKEL copper easy bend brake pipe with 2 metric male unions. 22"long, for 1988 on master cylinder lower outlet to PDWA valve outlet nearest to wing-other pipe is HMK026-both for left or right hand drive.
These pipes are retail...
Correct size and length brake pad pin for the caliper using 8.4" disc size and vented calipers.
7.5" Vented brake disc, suitable for use with our vented alloy 4 pot calipers (C-AJJ4023 together with C-AJJ4021). These are sold individually but should always be replaced in pairs. These are in fact 8.4" vented discs machined down
to 7.5" ...
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.