($110.00) £110.00 exc vat
($132.00) £132.00 inc vat
In stock
Also available is the shock absorber turret part separately, HMP441010 RH and HMP441011 L/H-- These complete arches are used on vans but require a small amount of body modification as they are slightly bigger--on the plus side it does mean you can fit other types of dampers that would not normally fit the van turret on the arch -original van arches are now obsolete.
($110.00) £110.00 exc vat
($132.00) £132.00 inc vat
In stockRecommended usage 1 x 14A9558 to fit one mini.
This is the R/H top part only of the rear wheel arch and does not include the shock absorber mounting turret.
This is the R/H vertical part panel only that has the shock absorber mounting turrett. See 14A9558/9 for complete panel
Genuine R/H rear quarter outer skin from the B post back for MK1/2 cars with sliding windows.
Rear subframe mounting stiffener L/H repair bracket with holes for subframe mounting and attaches to wheel arch Fits on ALA8623
Floor pan for Mini van/estate with no x member for remote change gearbox. Non Genuine. For saloon see 14A6491
picture is just to show what you get but bulge on centre tunnel for starter button appears to be on wrong side as this...
Non Genuine L/H lamp repair panel for rear corner panel on the Mini Pick-Up.
The top rear capping panel is also available as 14A7558CAP
Non Genuine R/H lamp repair panel for rear corner panel on the Mini Pick-Up.
The top rear capping panel is also available as 14A7557CAP
Non genuine rear companion bin for external hinge cars. These are supplied without the ash try mount.
Non genuine rear companion bin for external hinge cars. These are supplied without the ash try mount.
Non genuine repair panel for below the lights and above the rear valance, fits all models. Left hand side.
Rear seat belt anchor mounting point as found on later cars. This panel needs to be welded into the C post.
Rear seat belt anchor mounting point as found on later cars. This panel needs to be welded into the C post.
With bracket for floor carpet on Estate. 97.5cm long.
Aftermarket version of the rear R/H floorpan for 1992 on cars.
Appears to be a part section of the genuine whole length floor Right hand side.
This has extra length to go just under x memeber at 37.5"95cm long and under glove compar...
Aftermarket version of the rear L/H floorpan for 1992 on cars with cuved shape for tunnel.
Appears to be a part section of the genuine whole length floor Right hand side.
This has extra length to go just under x memeber at 37.5"95cm...
Complete rear back panel section from roof to bumper valance with MK1 lamp and bootlid apertures but the backlight(rear window screen) aperture is only for models from 1967 to 2000. This panel is Not available genuine with the original MK1 size rear ...
The rear lower side and rear corner panel for the Mini Van, Pick-up and Estate are all the same. This repair panel is intended to be spliced in to replace a most often rusted spot!
the left hand waist rail that is supplied on a new bodyside from us.
Acts as a stiffener on the inside of the bodyside between the rear seat pan and the B post just under the rear opening side window
this r/h waist rail is alreday fitted to a new bodyside CZH430 .
It acts as a stifener on the inside of the bodyside just below the rear side window for strengthening between rear seat pan and B post
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.