DOOR HANDLE SAFETY BOSS Mk2 & LATE Mk1
24A1834

($6.95) £6.95 exc vat

($8.34) £8.34 inc vat

In stockIn stock
Fitted to Mk2 cars with the 24A2083 door handle, thicker than the MK1 handle it only fits sliding window type doors. The seal betwen this and the body is 24A1835. This boss takes a 3/16" unf screw about 7/16 to 1/2" long, therefore you need to cut down either SE910161 or SE910201.

($6.95) £6.95 exc vat

($8.34) £8.34 inc vat

In stockIn stock

Recommended usage 2 x 24A1834 to fit one mini.
Front Door - Sliding window type - Qty 2

Recommended products
DOOR HANDLE SAFETY BOSS SEAL FOR 24A1834
24A1835

Mk2 minis had a safety boss fitted between the end of the door handle and the door--this is the seal that fits hehind the boss (24A1834)

($0.60) £0.60 exc vat

($0.72) £0.72 inc vat
BOOT CABLE COVER / FRONT DISC / RADIUS ARM SHROUD ...
SE910161

This screw is used to hold together the 2 halves of the disc shields on all

mini front discs. Also used to retain the boot lid cable to the bootlid.

Used on various door handles and door remote link.

This 3/16"unf screw was...

($0.22) £0.22 exc vat

($0.26) £0.26 inc vat
People also bought products
MK1 DOOR STRIKER AND GUIDE KIT
MSSK066

($42.00) £42.00 exc vat

($50.40) £50.40 inc vat
FELT GASKET FOR DOOR LOOK ON ALL EXTERNAL HINGE MI...
14A8568

The felt gasket that sits between the door lock and door on external hinge doors. Material could be either black or white

($0.87) £0.87 exc vat

($1.04) £1.04 inc vat
SLIDING WINDOW CATCH SET METAL
MSSK015METAL

Sliding window catches chrome type for classic Mini MK1 & MK2, Traveller, Van, Countryman, Riley Elf and Wolseley Hornet.



Classic Minis and Mini Coopers had chrome metal catches for the sliding windows and channels. Black and white...

($255.00) £255.00 exc vat

($306.00) £306.00 inc vat
RIVET CLIP UPPER DOOR MOULDING (BOTTOM)
13H744

Upper door moulding rivet for Cooper S door trim. For Mk1 usually 1 at front and 3 at back making 4 per side and on Mk2 there were 2 per end at bottom making 4 per side. This is the 10mm head rivet and not required on our own 14A9773/9774 trims that ...

($0.83) £0.83 exc vat

($1.00) £1.00 inc vat
DOOR CHECK STRAP MK III ONWARDS NON GENUINE
ADA5671MS

High quality non genuine door check strap for MK3 cars with wind up window doors (use with retaining pin CLZ412). Beware there are cheap copies on the market that are poor quality and when fitted to our cars did not function correctly!

($7.50) £7.50 exc vat

($9.00) £9.00 inc vat
MK3 DOOR HANDLE & BOOT FITTING AND GASKET KIT
CZH1785FK

MK3 Door & boot handle fitting kit, including original type screws, star washers and gaskets.

($4.74) £4.74 exc vat

($5.69) £5.69 inc vat
MK1/2 DOOR CHECK STRAP FITTING KIT
ALE1221FK

Complete fitting kit for the door check straps on all Minis fitted with external hinges.

($29.52) £29.52 exc vat

($35.42) £35.42 inc vat
MK 1/2 EXTERNAL HINGE ANGLED SPACER
14A7387

Angled spacer washer for Mk1/2 external door hinge cars for the upper hinge

($0.90) £0.90 exc vat

($1.08) £1.08 inc vat
MK3 MINI DOOR PLASTIC MEMBRANE (PR)
DL3030

Reinforced elastomer liner for door trim made from VELVEX to prolong the life of your door cards.Die cut on press tools that make the original door cards. Each hole for door locks, window winders, door handles, speaker holes are precision cut to fit ...

($12.23) £12.23 exc vat

($14.68) £14.68 inc vat
DOOR POCKET LOWER LINER R/H SLIDING WINDOWS
DP3023RH

Black door pocket liner for the R/H door which has sliding windows and external hinges

($11.91) £11.91 exc vat

($14.29) £14.29 inc vat
DOOR POCKET LOWER LINER L/H SLIDING WINDOWS
DP3023LH

Black door pocket liner for the L/H door which has sliding windows and external hinges

($11.91) £11.91 exc vat

($14.29) £14.29 inc vat
BARREL LOCK SET FOR PUSH BUTTON TYPE DOOR HANDLES ...
BARRELSET

Key barrel set for Mk3 onwards door handles and boot handles.

($19.22) £19.22 exc vat

($23.06) £23.06 inc vat
CHECK STRAP RETAINER PLATE MK1/2 S/STEEL
14A764S

This stainless steel plate has recessed holes in for the check strap screws.

2 per door are required and these are only for cars with external hinges that had the material check strap as per MK1.2 and vans

($2.00) £2.00 exc vat

($2.40) £2.40 inc vat
BARREL LOCK RETAINING CLIP (and fixing for 24A71 b...
PFR109

Clip for Door Handle required when changing barrel set. Heavy duty round spire clip specially made for the job.

($0.27) £0.27 exc vat

($0.32) £0.32 inc vat
SCREW FOR DOOR LOCK MK3 SPECIAL CUTTING THREAD
ZCT410

Special thread cutting screw 1/4 UNF 1.25" (31mm) long.

Screw to hold the lock assembly on the door of MK3 cars with internal hinges and wind up windows. On new doors or for easy fitment use these special screws with cutting thread (3 sided ...

($0.92) £0.92 exc vat

($1.10) £1.10 inc vat
KEY BLANK FS MINI DOOR/BOOT KEY
17H2475

Blank Mini FS door key.

($1.50) £1.50 exc vat

($1.80) £1.80 inc vat
DOOR PLATE BUFFER SCREW ( SHORT )
CMZ204

SPECIAL 6/32" UNC COUNTERSUNK POZI SCREW 1/4" LONG FOR HOLDING THE 14A6835 BUFFER PLATE TO BODY.

($0.28) £0.28 exc vat

($0.34) £0.34 inc vat
SCREW FOR MK3 DOOR HANDLE
PMZ306

This screw can used to hold together the 2 halves of the disc shields on all

mini front discs. fits MK1/2 door escutcheons.

Use SE910161 and cut down to 3/8" long including head

PMZ306 was originally 3/8"long u...

($0.30) £0.30 exc vat

($0.36) £0.36 inc vat
DOMED STAINLESS STEEL DOOR MIRROR L/H
GAM113

New Stainless steel door mounted mirror, complete with fixings for all 1980 onwards Mini's. This ensures they are a direct swap for the standard black plastic and painted door mirror's. These stainless mirror's are mounted on a very high quality chro...

($28.05) £28.05 exc vat

($33.66) £33.66 inc vat
DOMED STAINLESS STEEL DOOR MIRROR R/H
GAM112

New Stainless steel door mounted mirror, complete with fixings for all 1980 onwards Mini's. This ensures they are a direct swap for the standard Black plastic and painted door mirror's. These stainless mirror's are mounted on a very high quality chro...

($28.05) £28.05 exc vat

($33.66) £33.66 inc vat