DAMPER GAS A JUST FRONT SHOCK ABSORBER UPGRADE
552018

($33.02) £33.02 exc vat

($39.62) £39.62 inc vat

In stockIn stock
KYB front dampers, 9 years ago after initial testing Minispares

introduced the Kyaba (KYB)'s gas charged "Gas-a-just" dampers to the mini market providing an excellent upgrade for those running standard shocks on a road car even with 13" wheels. Offering a 25% upgrade to their standard equivalent they remain equally consistent in use unlike other cheap brands.Great value and quality from the largest manufacturer of original equipment shock absorbers in the world. Over 600 sales per annum of just this type of KYB proves how good this brand is. Keith Dodd used these on his car for 2-3 years and were his favourite until he changed them for Evolution AGX 743039/40 for research and development. See web site article on shocks.

Non Hand Adjustable front damper guide ratings

GSA71541 Unipart original offering

44201 KYB standard replacement

342001 KYB Gas filled 25% upgrade on standard

GMAX-FRONT GMAX gas filled upgraded

552018 KYB Gas self adjusting

B36-0370 Bilstein top road damper

($33.02) £33.02 exc vat

($39.62) £39.62 inc vat

In stockIn stock

Recommended usage 2 x 552018 to fit one mini.
Front Rubber Cone Spring Suspension ( Known as Dr - Qty 2
Front Suspension - Qty 2

Recommended products

KYB damper, Mini rear.

KYB's gas charged "Gas-a-just" shock absorbers are an excellent upgrade for those running stock shocks on a road car. They are an excellent value for the price and offer good handling without sacrificing ride quality. ...

When keith Dodd bought his twin point mini he took off the original dampers

and replaced them with Kayaba Gas-a-just dampers(552018/9)plus hilos to improve road handling along with the castor, camber angle rectifications. After 11,000 perfec...

Alternative products

Pair of front and rear gas self adjust dampers/shock absorbers at a special price

Kit products

When keith Dodd bought his twin point mini he took off the original dampers

and replaced them with Kayaba Gas-a-just dampers(552018/9)plus hilos to improve road handling along with the castor, camber angle rectifications. After 11,000 perfec...

When keith Dodd bought his twin point mini he took off the original dampers

and replaced them with 552018 & 552019 dampers. Although original Hilos were fitted this kit, the budget adjustable suspension will improve...

Pair of front and rear gas self adjust dampers/shock absorbers at a special price

People also bought products

Genuine Mini Spares standard performance cone utilizing 20 years of elastomer/rubber technology from our competition cones manufacturer. Only beeen available since 02/09/2020 and proudly made in the UK with 10,000 sold by 2023.

Original cone...

Genuine Mini Spares UK made complete joint with the following specifications,

correct dimensions and shape of pin and ball in EN24T, using correct spec grease,

genuine original shape cup using correct material (21A423MS...

Genuine Mini Spares UK made joints are complete with the following specifications, correct dimensions and shape metal knuckle in EN24T, with the genuine cup made in original material and correct shape (21A423MS) and an upgraded poly boot...

Standard gas filled replacement front shock absorber from Bilstein.



Non hand adjustable front damper guide ratings

442001 KYB standard replacement

342001 KYB Gas filled 25% upgrade on sta...

Replacement ball joint shims, comprising of 2x 003"(.076MM) shims, 2x 005"(.127MM) and 2 x 010"(.254MM).

Tie rod extra hard rubber bush, harder than standard.

You dont want these bushes too hard as it can cause the threaded on the end of the tie rod to break under extreme conditions.

In theory the outer ones should be harder for rigidi...

Mini Spares quality suspension kit includes all four adjustable alloy trumpets and knuckle joints plus the two extended rod struts required for the rear. Many people will advise you, why you should consider upgrading to the genuine classic "Hi/Lo" su...

Car set of 4 top Subframe tower mountings for Road cars from 1976-2000.

Aluminum pad for the top of each subframe mounting and a poly pad below to replace the standard rubbers originally fitted. The alloy pads help reduce subframe movement, ...

The New Front Evolution AGX shock absorber is twin tube type and gas filled. On car 8 point easy adjustable specific settings. This is currently one of the shortest fitted length dampers we stock. Closed length 210mm from pin centres. Open length is ...

Genuine Mini Spares product ideal for road use for maximum performance, where other examples available tail off as they get worked and heat up.

Hilos will be required to enable fitment as they are taller but FAM3968EVO are a str...

Lower suspension arms to give 2.0 extra degrees of negative camber. Stamped with 2.0 Sold in pairs only.


General:See also c-AJJ3360 fully adjustable arms

Negative camber lower arms are specifically forged in different degrees to...

Angled grease nipple for the upper arm on the front suspension of all Minis

importantly lubricates the upper arm spindle which so often gets neglected so check yours out and make sure this nipple is working properly. Also fits rear radius ar...

Lower arm top hat bush in poly to fit all lower arms with twin taper as standard from 1965. Mini Spares have upped the game once again with these superbly finished bushes which surpass anything on the market. Fitted with a metal bush insert these are...

Special shims for adjusting your swivel pins on the front hub. See workshop manual for correct settings-these are 003 thou but if you need 10 thou see 2A4241 or 2A4240 for 3 thou the thinnest.

A must-when the castor and camber angles are changed or whenever the geometry of the car is set up you will require these bushes. They are good for cars with up to 3.5 degrees of castor angle.

From November 2003 they have been made from a s...

Genuine Mini Spares part improved from original for the R/H upper mounting point of your damper(shock absorber) and fit 14A6948 captive nut plates for upper bolt fixings . For lowered suspension use C-AJJ3359

These cone springs will require Hilo adjustable suspension as they sit higher than the originals.Containg an anti fade property and shape which helps them going off during racing and giving hopefully a season of racing before replacement. A softer ro...

Uses 2 Soft standard rubbers on the insides and the 2 Mauve poly on the outside.

HARD OUTERS / SOFT INNERS - STOPS BRAKE WEAVING.

Don't be confused as this special shore hardness set up was proven after 2 years of testing and is per...

Each Hi-Lo Suspension Kit Includes one pair of Hi-Lo trumpets and nylon knuckle cups which will fit front or rear, but you will need the sleeved rods HILO-01 to enable fitment to the rears. For a car set you require 2 HILO k...

Mini Spares own to original drawing specifications with heat treatment correctly applied where appropiate.Lack of proper maintenance (grease) will make the pivot shaft and/or bearings wear that much faster. In severe cases the shaft may rust to the b...