ROCKER SHAFT END WASHER
6K555

($0.80) £0.80 exc vat

($0.96) £0.96 inc vat

In stockIn stock
The standard end washer for the rocker shaft but see AEG168 and AEG169 for spacer shims or complete kit C-AEG392

($0.80) £0.80 exc vat

($0.96) £0.96 inc vat

In stockIn stock

Recommended usage 2 x 6K555 to fit one mini.
Cylinder Head - Qty 2

Recommended products
ROCKER SHAFT SPRING WASHER
2A18

Goes on both ends of the rocker shaft to keep tension on the #1 & #8 rockers.

($0.53) £0.53 exc vat

($0.64) £0.64 inc vat
ROCKER SHAFT SPACER SPRING
6K556

original rocker shaft spring (3) between rockers on every A series engine

($1.35) £1.35 exc vat

($1.62) £1.62 inc vat
Alternative products
ROCKER SHAFT WASHER 40 THOU WIDE
AEG168

Originally fitted to help rocker pad to valve stem alignment and reduce friction, the standard springs can also be replaced with solid spacers and these shims. The spacers including correct shim set are sold as a set C-AEG392[.

...

($0.23) £0.23 exc vat

($0.28) £0.28 inc vat
People also bought products
VALVE COTTER LARGE SINGLE GROOVE COMPETITION(1 UNI...
2A11EVO

New competition valve cotter for early heads with the large single groove valve, these are precision CNC machined from 4340 and heat treated to a better spec than EN24T and claimed to be stronger in fatigue life.

These locate better in the v...

($3.96) £3.96 exc vat

($4.75) £4.75 inc vat
ROLLER ROCKER SPACER KIT FOR RACE ALLOY 5 PORT
C-AEG393

($12.00) £12.00 exc vat

($14.40) £14.40 inc vat
VALVE SPRING SEATS SHIMS 0.020"(set of 4)
SS1

Spring seat shims (set of 4), 0.020" thick (0.5mm).

Spacer shims to increase valve seat pressure and overall spring rate.

These were also used on all the 8 port head valve seats to prtect the alloy seats from wear. (8 port now C-AHT...

($6.90) £6.90 exc vat

($8.28) £8.28 inc vat
VALVE SPRING SEATS SHIMS 0.040" (set of 4)
SS5

Spring seat shims (set of 4), 0.040" thick (1mm).

Spacer shims to increase valve seat pressure and overall spring rate.

These were also used on all the 8 port head valve seats to prtect the alloy seats from wear. (8 port now C-AHT36...

($7.59) £7.59 exc vat

($9.11) £9.11 inc vat
ROCKER ADJUSTING NUT EN24T
C-AHT450

Mini Spares genuine upgraded part. Hexagon head rocker screw nut in EN24T.

Also available is a flanged nut C-AHT449

($2.64) £2.64 exc vat

($3.17) £3.17 inc vat
CYLINDER HEAD HEATER TAP FITTING KIT
ADU9102FK

Fitting kit comprising of studs, nuts, plain washers, spring washers and a gasket

($1.60) £1.60 exc vat

($1.92) £1.92 inc vat
HEAD STUD AND NUT KIT WITH A+ FLANGED NUTS
C-AHT279A

This kit of head studs is the best available for road and lightly tuned engines. See the C-AHT280 set for highly tuned engines.

The material spec is alloy steel heat treated to 75 tensile tons per square foot minimum and finish...

($51.92) £51.92 exc vat

($62.30) £62.30 inc vat
ARP 11 STUD HEAD SET
C-AHT283

ARP Head stud kit that compromises of;

4 x Long Head Studs

7 x Short Head Studs (Disregard 2 if you're using a 9 stud application)

11 x Multipoint ARP nuts

11 x Heavy Duty Washers

4 x Rocker post studs <...

($142.50) £142.50 exc vat

($171.00) £171.00 inc vat
VALVE COTTER SINGLE GROOVE COMPETITION (1 UNIT=2 H...
88G459EVO

New competition valve cotter, these are precision CNC machined from 4340 and heat treated to a better spec than EN24T and claimed to be stronger in fatigue life.

These locate better in the valves and easier to control spring heights.

($3.96) £3.96 exc vat

($4.75) £4.75 inc vat
ROCKER COVER SILICON GASKET 11 STUD HEAD
GUG5038EVO

Upgraded rocker cover gasket made in silicon, cut outs for 11 stud head and ideal when rocker cover is removed on a regular basis.

Rarely you may require longer rocker cover bolts when fitting this so use CAM6823.

($8.75) £8.75 exc vat

($10.50) £10.50 inc vat
ROCKER COVER RED MINISPARES WITH GFE6003 CAP
ROCKERCVR02

Unlike polished covers, these red powder coated aluminum valve covers don't get that dingy look; simply wipe them and they're clean. (Fins and Mini Spares logo remain cast aluminum finish) And they're made to clear our hi-lift rockers. Available...

($36.11) £36.11 exc vat

($43.33) £43.33 inc vat
TOP CAP TITANIUM RACE SET(8) FOR C-AEA526/7
C-AEA530

Set of strong lightweight titanium top caps to suit our valve springs C-AEA526/527 hard for single collet competition valves. Sold as a set of 8.

($80.00) £80.00 exc vat

($96.00) £96.00 inc vat
8 PORT HEAD STUD AND NUT SET (STUDS EN24 CHROME MO...
C-AHT282

EN24 Nickel Chrome moly steel studs,Competition head stud kit.

torque to 45ftlbs -no need to re-torque cometic type head gaskets.

For use on the 2012 onwards heads only.

($58.76) £58.76 exc vat

($70.51) £70.51 inc vat
CYLINDER HEAD HEATER TAKE OFF OUTLET ALLOY 5/8"
12G2534ALLOY

Alloy CNC version of the cylinder head take off 12G2534. The standard item being steel can be prone to corrosion, this CNC alloy version is smart, and will not corrode like steel does

($22.32) £22.32 exc vat

($26.78) £26.78 inc vat
CYLINDER HEAD ANCILLARY STUD AND NUT KIT PRE 1990
MSSK061

Complete stud, nut and washer kit for the cylinder head ancillaries. Kit contains parts to retain the following:

Inlet/Exhaust manifold to head, studs/nuts/washers

Thermostat housing (no sandwich plate) studs/nuts/washers

H...

($14.00) £14.00 exc vat

($16.80) £16.80 inc vat
MANIFOLD STAINLESS STEEL STUD AND NUT KIT
C-STR282

Minispares own stainless steel manifold stud and 6 sided hexagon nut kit.

For mutipopint nut kit see C-STR287

Quantity required one kit per car

($21.41) £21.41 exc vat

($25.69) £25.69 inc vat
THERMOSTAT HOUSING STAINLESS STEEL STUD AND NUT KI...
C-STR281

Minispares own stainless steel Thermostat housing stud kit for the single tier type thermostat housing.Quantity required one kit per car

($11.00) £11.00 exc vat

($13.20) £13.20 inc vat
THERMOSTAT HOUSING FITTING KIT (SINGLE TIER TYPE)
12G103FK

This thermostat housing fitting kit, suitable for all single tier thermostat housings. Comes with new studs, nuts, washers and Klinger thermostat housing gasket

($3.35) £3.35 exc vat

($4.02) £4.02 inc vat
OIL FILLER CAP RED LATE CARS/METRO
GFE6007

Originally fitted to Minifin rocker covers as standard Rover equipment, it will also fit almost every other rocker cover including our FP26 range and Minispares alloy covers. This improved cap has a large grip and an improved lock system...

($6.80) £6.80 exc vat

($8.16) £8.16 inc vat
INNER VALVE SPRING BOTTOM COLLAR
AEA403

Standard inner valve spring lower collar, use C-AEA654.

These are no longer required when using our C-AEA526 and C-AEA527 range of silicone wire springs which are a slight interferance fit and friction ...

($1.89) £1.89 exc vat

($2.27) £2.27 inc vat