FRONT PANEL MINI 1997->2000 MPI (FRONT MOUNTED RAD...
ASJ360070MS

($112.50) £112.50 exc vat

($135.00) £135.00 inc vat

In stockIn stock
Reproduction version os ASJ360070. For the twin point only as it changed shape to accommodate the front mounted radiator and different bonnet fittings.

($112.50) £112.50 exc vat

($135.00) £135.00 inc vat

In stockIn stock

Recommended usage 1 x ASJ360070MS to fit one mini.
Saloon and Front Ends - Qty 1

Alternative products
FRONT PANEL MINI 1997->2000 MPI (FRONT MOUNTED RAD...
ASJ360070

For the twin point only as it changed shape to accommodate the front mounted radiator and different bonnet opening location fittings. Also has holes for 4 extra lamps fitted as standard

($195.00) £195.00 exc vat

($234.00) £234.00 inc vat
People also bought products
MK1/2 TOE BOARD NON GENUINE
14A6487MS

MK1/2 toe board with steering rack mounts.

($149.85) £149.85 exc vat

($179.82) £179.82 inc vat
FLOOR PAN VAN/ESTATE FRONT TO REAR LESS CROSSMEMBE...
24A604

Floor pan for Mini van/estate with no x member for remote change gearbox. Non Genuine. For saloon see 14A6491

picture is just to show what you get but bulge on centre tunnel for starter button appears to be on wrong side as this...

($510.00) £510.00 exc vat

($612.00) £612.00 inc vat
DOOR CHECK L/H PANEL GENUINE
ALA6473GEN

L/H Inner hinge type A post repair panel with hinge fitting holes mini, MK3

this is a genuine heritage part.

($32.00) £32.00 exc vat

($38.40) £38.40 inc vat
DOOR CHECK R/H PANEL GENUINE
ALA6472GEN

R/H Inner hinge type A post repair panel with hinge fitting holes mini, MK3

this is a genuine heritage part.

($32.00) £32.00 exc vat

($38.40) £38.40 inc vat
WINDSCREEN LOWER SCUTTLE PANEL NON GENUINE
HMP441001MS

This Non genuine pattern panel has the holes for windscreen wipers and jets with barely an inch of pillar.

On cars from 1992/3 on check the original windscreen drain channel as the VIN numbers were stamped above the clutch master cylinder-wi...

($44.85) £44.85 exc vat

($53.82) £53.82 inc vat
INNER WING AND FLITCH PANEL Mk1/2 L/H
14A7901

For vehicles with external hinges and sliding type windows this is a full inner front wing with the wheel arch panel. The panel is what that the outer A panels for the hinges attach to.This is the left hand pane wing with radiator vent slats but not ...

($200.00) £200.00 exc vat

($240.00) £240.00 inc vat
FLOOR EXTENSION PANEL FOR MINI VAN/ESTATES ETC
14A9023

Commercial Mini floor extension

It is an essential part for the correct restoration of all the longer wheelbase mini derivatives. From the original tooling.

($100.00) £100.00 exc vat

($120.00) £120.00 inc vat
FLOOR PAN L/H FRONT 1991 on
MSL25L

Aftermarket version of the L/H floorpan for 1991 on cars.

This floor was made stronger with smaller heel pad area to prevent vibration and rust and will fit any Rod change gear shift mini but was introduced on the first injection cars in 199...

($34.50) £34.50 exc vat

($41.40) £41.40 inc vat
WINDSCREEN CORNER PANEL L/H
MS6L

A non genuine panel made for repairing the corner of the windscreen panel which is prone to rust from water splashing up from underneath the front wheel arch.

Experience has shown its easier to fit the genuine panel HMP441001 al...

($16.88) £16.88 exc vat

($20.26) £20.26 inc vat
FRONT FLOOR PAN L/H PRESHAPED
MS25L

You can spend hours cutting out rust and patching holes, but why bother? These reproduction floor pans extend the full width with vertical flanges for easy installation and fairly well represent the original stamping. They have added metal to include...

($33.00) £33.00 exc vat

($39.60) £39.60 inc vat
WING INNER WITH HOLE +A PANEL LEFT HAND MK3 TYPE 1...
ABD36005

Inner front L/H wing with the A panel and door stiffener check strap panel attached for ease of fitment and alignment.This has the large round hole for the fan as fitted from 1991on

($245.00) £245.00 exc vat

($294.00) £294.00 inc vat
MINI FRONT PANEL PRE 1976
MS4E

This early front (nose) panel will fit any Mini manufactured before 1976. It is probably easier to replace the entire panel than to repair a damaged one, especially if it's been hit more than once! Later Minis with rubber mounted subframes, use panel...

($89.93) £89.93 exc vat

($107.92) £107.92 inc vat
FRONT FLOOR PAN R/H PRESHAPED
MS25R

You can spend hours cutting out rust and patching holes, but why bother? These reproduction floor pans extend the full width with vertical flanges for easy installation, and fairly well represent the original stamping. They have added metal to includ...

($33.00) £33.00 exc vat

($39.60) £39.60 inc vat
INNER HINGE REPAIR PANEL L/H
MSL41L

1970 on, cars with internal hinges and wind up windows

This repair panel has holes for the hinges on A post and overlaps 3.5"(85mm)onto the wheel arch section of inner wing

($12.90) £12.90 exc vat

($15.48) £15.48 inc vat
HEADLAMP BOWL METAL
MS14

If your rusted old headlight bucket is getting to you, don't waste time trying to salvage it when new metal reproduction metal buckets are AVAILABLE.

With a headlamp rim fixing bracket 37H7421 attached

Whether you are ...

($20.40) £20.40 exc vat

($24.48) £24.48 inc vat
INNER HINGE REPAIR PANEL R/H
MSL41R

1970 on, cars with internal hinges and wind up windows

This repair panel has holes for the hinges on A post and overlaps 3.5"(85mm)onto the wheel arch section

($12.90) £12.90 exc vat

($15.48) £15.48 inc vat
FRONT PANEL VAN AND PICKUP 1976 on
AAM1106

Non Genuine for the Pick-up and Van with a slat type fixed grille as a trademark for Mini commercial type vehicles originality.

This good reproduction is the only panel available to allow you to restore it easily.It is a modified saloon pan...

($187.50) £187.50 exc vat

($225.00) £225.00 inc vat
GUSSET CLOSING PANEL R/H
14A8348

THIS PANEL PROTECTS THE UNDERSIDE OF THE WINDSCREEN VALANCE UNDER THE FRONT WING SECTION also fitted on the inner wing panel 14A8346/7

($15.00) £15.00 exc vat

($18.00) £18.00 inc vat
DASH RAIL UPPER METAL PANEL WITH ASHTRAY APERTURE
14A6675

This panel has mounting holes for later models facia crash panel. These holes will require blanking for true originality on earlier models without the facia pad

($55.00) £55.00 exc vat

($66.00) £66.00 inc vat
WING INNER ONLY L/H ROUND FAN HOLE 1991-96
ABD36007

Inner l/h wing with large fan hole from 1991-96. This panel is available with the A panel fitted for ease of fitment as ABD36005

Was ABD36009 but that did not have the stiffener plate for the damper bracket fitted which was diff...

($179.00) £179.00 exc vat

($214.80) £214.80 inc vat