DISTRIBUTOR 45D ELECTRONIC pre A PLUS NEG EARTH ON...

BAU1962MS

($67.50) £67.50 exc vat

($81.00) £81.00 inc vat

In stock

NEGATIVE EARTH ONLY..45D electronic(contactless)Pre A plus distributor .

replaces 41824A and 41418 plus any 998/1098cc up to the changeover of A plus type distributors. For best performance and tune we advise our electronic evolution version C-27H7698

These new reproduction units are PRE A PLUS 45D type. Universally set up by Rover for any 998/1098cc/1275cc, even allegro and Maxi 1500/1750cc from 1974 to 1977 and they work fine on any other year 998/1098cc minis also. The distributor curves on this make it so universal for many uses, but for 1275cc even with mild tune we advise 12G4180MS.

Range of modern day curve distributors from minispares-

GEU930 25D 850/early 998

12G2140 23D Cooper S non vac

BAU1962 45D 998/1098

ADU5789 59D 998 A plus

12G4180 45D 1275cc with vac, good for modified road tune engines

ADU3825 59D 1275 with vac, A Plus good for modified road tune

For electronic versions add suffix MS- example= ADU5789MS

Mini Spares specification for best alround performance electric distributor for std to 276 camshaft profiles see C-27H7698

($67.50) £67.50 exc vat

($81.00) £81.00 inc vat

In stock

Recommended usage 1 x BAU1962MS to fit one mini.

Alternative products

DISTRIBUTOR ELECTRIC EVOLUTION PERFORMANCE TO 276 ...

C-27H7698

Pre A Plus Electronic Ignition distributor with vac unit, modified to our specification in the UK to give best performance on any minis with std to 276 camshaft profile.

Brand New distributor complete with electronic conversion already fitt...

($82.50) £82.50 exc vat

($99.00) £99.00 inc vat

People also bought products

DISTRIBUTOR ELECTRIC EVOLUTION PERFORMANCE TO 276 ...

C-27H7698

($82.50) £82.50 exc vat

($99.00) £99.00 inc vat

DISTRIBUTOR 25D WITH VAC ELECTRONIC - NEG EARTH

GEU930MS

NEGATIVE EARTH ONLY..Reproduction CONTACTLESS Distributor suitable for modern day fuels for 850 and 998cc pre 1974 with upgraded rotor arm "Negative earth only". A worn out distributor can cost you both performance and economy. Precise spark timing ...

($72.00) £72.00 exc vat

($86.40) £86.40 inc vat

DISTRIBUTOR 998 59D ELECTRONIC A PLUS

ADU5789MS

Electronic Distributor for any standard A+ 998cc. Negative earth only.

From 1982on 998cc were fitted with a ballast coil which means a new wire must be fitted from fusebox top left terminal where there is a large white cable to the...

($75.00) £75.00 exc vat

($90.00) £90.00 inc vat

DISTRIBUTOR 23D ELECTRONIC NEG EARTH

12G2140MS

NEGATIVE EARTH ONLY. Cooper"S" 23D distributor, no vac unit-This is NOT THE ORIGINAL LUCAS ITEM but a new contact less electric copy of 40819 to cope better with modern day fuels. Fitted with the better Red rotor arm upgrade.Cheaper than many electro...

($72.00) £72.00 exc vat

($86.40) £86.40 inc vat

SCREW KIT FOR 45D / 59D DISTRIBUTORS

57H5135

These are the screws needed to fix the condensor, points, base plate and vacuum to 45D and 59D distributors. For 23/25D type see 17H5106

($1.80) £1.80 exc vat

($2.16) £2.16 inc vat

DISTRIBUTOR CAP RETAINING CLIP FOR 45D DIZZY'S

GDC136CLIP

Replacement distributor cap retaining clip for all 45D type distributors-sold per clip.

($2.50) £2.50 exc vat

($3.00) £3.00 inc vat

DISTRIBUTOR 65D 90-93 HIF44 CARB COOPER

AUU1536

Electronic Ignition distributor, fitted as standard to all 1300 Carb Cooper models. Also Metro 1275cc engine.

Replacement service items for this are:

Cap GDC156

Rotor arm GRA2143

Should be used with GC...

($80.50) £80.50 exc vat

($96.60) £96.60 inc vat

O RING SEAL ON DISTRIBUTOR HOUSING PRE A+

13H2792

the oil seal to fit on 12A1136 distributor housing. Pre A Plus

the earlier housing 2A612 did not have a seal.

($0.85) £0.85 exc vat

($1.02) £1.02 inc vat

ROTOR ARM FOR 25D TYPE PERFORMANCE TYPE

GRA101

If you have an original 25D type distributor this is an upgraded arm (blade moulded and riveted )for performance use because all the other types available now are likely to fail at high revs. Because the blade is thin,or the rivet sometimes to long a...

($12.00) £12.00 exc vat

($14.40) £14.40 inc vat

DISTRIBUTOR SPINDLE O RING SEAL

513682A

The O ring that actually sits on the distributor drive spindle shaft in the recess provided.

($0.48) £0.48 exc vat

($0.58) £0.58 inc vat

VACUUM PIPE ELBOW

12B2062

The stock vacuum advance distributor is connected to the carb/manifold by a small rubber joint that in turn is mated to metal line that fits the distributor. If the little rubber connector is deteriorated it could allow a vacuum leak at the carb and ...

($2.25) £2.25 exc vat

($2.70) £2.70 inc vat

LUMENITION FOR 45D DIST ON

MTK007

Electronic ignition kit to fit 45/59D4 distributors.

Designed to do away with points this is a simple drop in installation to fit into your existing distributor. Also see our range of distributors with built in electronics--BAU1962MS & [lin...

($112.50) £112.50 exc vat

($135.00) £135.00 inc vat

DISTRIBUTOR DISSY WITH VAC 45D PRE A PLUS can use ...

C-27H7766

Aldon modified yellow equivalent on the original 45d body early pre A plus Once the engine has been modified, it will invariably require a different ignition curve-especially when compression ratios have been raised and camshafts changed. There is no...

($159.12) £159.12 exc vat

($190.94) £190.94 inc vat

DISTRIBUTOR CAP FOR 25D DISTRIBUTOR TOP ENTRY

GDC103

Top-entry cap takes plug-in wires and will interchange with GDC102. This is an alternative for side entry cap GDC102 which some believe is less prone to wet-weather problems. Features aluminium contacts.

($4.80) £4.80 exc vat

($5.76) £5.76 inc vat

DIST CLAMP PRE A PLUS

501134

This distributor clamp should not be bent; if it is, either you can't get the dizzy all the way in or it won't grip.

($10.70) £10.70 exc vat

($12.84) £12.84 inc vat

DISTRIBUTOR ORIGINAL MINI 25D TYPE WITH VAC UNIT

GEU930

Range of distributors with modern day curves built,programmed and tested for Mini Spares in UK.

Beware of cheap China made units that are poorly made- see note at bottom. GEU930 25D 850/early 998

12G2140 ...

($43.83) £43.83 exc vat

($52.60) £52.60 inc vat

CONNECTOR FOR ADVANCE RETARD VACUUM PIPE

12B2095

Straight rubber connector pipe. The standard vacuum advance distributor is connected to the carb/manifold by a small rubber joint that in turn is mated to metal line that fits the distributor. If the little rubber connector is deteriorated it could a...

($0.90) £0.90 exc vat

($1.08) £1.08 inc vat

DISTRIBUTOR SHIELD COVER FOR ELECTRICS LATEST TYPE

BHM1675

The current genuine large plastic shield with all fittings required to cover the engine electrics.

Parts are available seperately:

The plastic clips are 13H6461.

Upper bracket is NJU10002 x 2 requ...

($29.79) £29.79 exc vat

($35.75) £35.75 inc vat

DISTRIBUTOR CLAMP FOR A PLUS DIZZY 85 ON