INTERNAL BONNET RELEASE CONVERSION

The safest way to have a bonnet lock is an internal release type, as fitted to all the late Minis FROM 1992/3 on. The kit includes a new catch with bolts, correct length cable and bracket to fit at the end of the parcel shelf. Not suitable for clubma...

($19.20) £19.20 exc vat

($23.04) £23.04 inc vat

BONNET PROP BRACKET FOR ALL INJECTION MODELS

ASU360120

($7.20) £7.20 exc vat

($8.64) £8.64 inc vat

BONNET REAR GUTTER SEAL SPONGE PRE1991

14A9010MS

Called the rear bonnet seal it actually sits in the windscreen front scuttle panel on all minis up to 1991. This is the shape and size neoprene foam seal that we have found works best and has an adhesive backing to make fitting easier and less messy.

($3.25) £3.25 exc vat

($3.90) £3.90 inc vat

BONNET HINGE PAIR for MK3 MINIS on

HMP441027

A pair of bonnet hinges for mk3 saloons after 1971 unpainted

($33.15) £33.15 exc vat

($39.78) £39.78 inc vat

BONNET LOCK PIN .CLUBMAN only

14G2444

Bonnet lock pin for MiniClubman ,Midget,MGB a

($4.53) £4.53 exc vat

($5.44) £5.44 inc vat

INTERNAL BONNET RELEASE CONVERSION

GS130273

The safest way to have a bonnet lock is an internal release type, as fitted to all the late Minis FROM 1992/3 on. The kit includes a new catch with bolts, correct length cable and bracket to fit at the end of the parcel shelf. Not suitable for clubma...

($19.20) £19.20 exc vat

($23.04) £23.04 inc vat

BONNET LANDER PANEL CLUBMAN

MS149

The only bonnet landing panel available for the clubman shape body for a long time this part is perfect in every detail and was used on the heritage bodyshells.

A Genuine panel is now available from BL Heritage CZH149.

...

($26.25) £26.25 exc vat

($31.50) £31.50 inc vat

RUBBER BONNET HOOKS - SMALL

MS119

2" rubber hooks, sold in pairs. To hold down your bonnet, or whatever.

($4.64) £4.64 exc vat

($5.57) £5.57 inc vat

BONNET HOOKS (LARGE) RUBBER

MS118

If you want to hold it in place then this is easy and simple. 4" long rubber hooks can be used on bonnet and/or boot lid. Packaged in pairs with both brackets.

($7.00) £7.00 exc vat

($8.40) £8.40 inc vat

PLASTIC CLIP FOR BONNET PROP AND SUNVISORS ON 64/6...

GFK7344

Plastic clip for sunvisor 1964-5 and some bonnet props on early cars,was GHF1120 and ADA4370. the side clip on these models was ADA4484.

this set up was used with first plastic mirrrors and black rubber...

($2.00) £2.00 exc vat

($2.40) £2.40 inc vat

BLACK LEATHER BONNET STRAPS-PAIR ONLY

MS121

Leather Bonnet Straps.

Black leather bonnet straps, sold in pairs and at a very cost effective price. These straps are great and can be used for everything from the bonnet to the tool box.

($8.48) £8.48 exc vat

($10.18) £10.18 inc vat

KNOB SEAT ADJUSTING KNOB ( ALSO BONNET SLIDER )

CZK8289

black plastic knob for seat adjust handle and on bonnet opening slider for some cars

($0.75) £0.75 exc vat

($0.90) £0.90 inc vat

BONNET OR BOOT TERRY TYPE SPRING CLIPS PAIR

MS122

These chrome spring type clips are used to keep the bonnet and boot from coming open on competition cars and are available in black. Holes will be required in the fitting of these so if you do not want to drill your body panels these are not for you....

($8.64) £8.64 exc vat

($10.37) £10.37 inc vat

BONNET PROP RUBBER

2H9215

Black rubber bung to hold the bonnet prop in place on MK1/2 minis.

Also the same profile and shape as the rear boot board buffers but nearly twice the length at 1.5"(38.3mm).

($2.60) £2.60 exc vat

($3.12) £3.12 inc vat

BONNET SPRING FOR CLUBMAN THIMBLE PIN

4G1588

the clubman had a longer and wider spring for the bonnet release thimble

3.25"long and 1.5" wide

($3.15) £3.15 exc vat

($3.78) £3.78 inc vat

QUICK RELEASE BONNET HINGE PR MK3 ONWARDS

MSSK019

Quick Release Bonnet Hinges , MK3.one pair

Available for MK3 onwards Minis only. The MK3 Mini has hinges mounted differently from earlier models, these allow the bonnet to be quickly lifted off the car. If you've ever banged your head or cri...

($41.23) £41.23 exc vat

($49.48) £49.48 inc vat

BONNET REAR GUTTER SEAL ENGINE BAY AS FITTED FROM ...

JRC8000

This is the last seal fitted by the Rover factory on all twin point injection cars. It sits under the bonnet on the windscreen scuttle panel and down the front wings about 9" each side.It needs the right angle corners to be created when fitting, cut ...

($10.05) £10.05 exc vat

($12.06) £12.06 inc vat

BONNET FRONT DRAIN SEAL

JRC7898

This is the seal that goes on the front of the bonnet to stop rain getting at

your electrics or causing rust and was fitted to every mini and Clubman.

($6.75) £6.75 exc vat

($8.10) £8.10 inc vat

BONNET PROP ROD

BKD360030

Bent or missing bonnet prop? For the Clubman models you will have to straighten it by hand as the original is obsolete. Correct to latest shape fitted on mini saloons--only one in current production, Fits all. Replace it---Dont forget it and buy a ne...

($8.50) £8.50 exc vat

($10.20) £10.20 inc vat

Bonnet Prop Bracket RH for all pre injection minis

14A7806

This is the bracket on the inner wing to put your bonnet prop into when the bonnet is in the open position.

($6.00) £6.00 exc vat

($7.20) £7.20 inc vat

BONNET TAILORED SOUND PROOF FELT KIT

47H9615

Four tailor made felt pieces to fit in the segments between the bonnet strengthening webs to allow maximum under bonnet clearance.

See FELT860 for spray adhesive. These are about 1cm thick and the original very thick sound dea...

($25.60) £25.60 exc vat

($30.72) £30.72 inc vat