HEAD UNLEADED SMALL BORE WITH TRANSMITTER HOLE 196...
GCG1007MS

($337.50) £337.50 exc vat

($405.00) £405.00 inc vat

In stockIn stock
Old unit must be crack free and serviceable-built up with valves etc. Must be a 998cc casting CAM4810 or 12A1456 with flat manifold facewith transmitter hole. .

Completely rebuilt in the UK by top engine reconditioner Ivor Searle who used to recon all Unipart engines, set up for unleaded fuel with hardened valve seats and completely assembled with valves and springs.

Head has a refundable surcharge added of £300 if old unit not exchanged

See part number MSSK061 for replacement stud kit for thermostat housing etc

($337.50) £337.50 exc vat

($405.00) £405.00 inc vat

In stockIn stock

Recommended usage 1 x GCG1007MS to fit one mini.
Cylinder Head 850CC, 998CC & 1100CC Pre 'A' Plus - Qty 1
Cylinder Head - Qty 1

Recommended products
SERVO OUTLET ADAPTOR FOR C-AHT770 MANIFOLD
12H1405MS

Aftermarket union for fitting all mini inlet manifolds where a take off is required for your brake servo or emission valve on Cooper S cars.

($5.93) £5.93 exc vat

($7.12) £7.12 inc vat
HEAD GASKET SET 850/997/998/1100 ALL SMALL BORE IN...
AJM1250MS

Minispares universal super value head kit includes a head gasket, valve cover gasket, manifold gasket, thermostat gasket, heater tap gasket, 2x thermostat gasket, 6x HS2 carb gaskets, 3x HS4 carb gaskets,2x air cleaner to ca...

($10.42) £10.42 exc vat

($12.50) £12.50 inc vat
CYLINDER HEAD ANCILLARY STUD AND NUT KIT PRE 1990
MSSK061

Complete stud, nut and washer kit for the cylinder head ancillaries. Kit contains parts to retain the following:

Inlet/Exhaust manifold to head, studs/nuts/washers

Thermostat housing (no sandwich plate) studs/nuts/washers

H...

($14.00) £14.00 exc vat

($16.80) £16.80 inc vat
People also bought products
HEAD UNLEADED 1275 WITH BYPASS HOSE (£150 surcharg...
GCG1009MS

Old head must be without cracks and serviceable - built up and of identical origin (12G940 casting). Built up means - valves/springs and top caps fitted

New head is fully reconditioned with hardened lead free exhaust seats by an ex Rover top...

($333.00) £333.00 exc vat

($399.60) £399.60 inc vat
VICTOR REINZ SMALL BORE HEAD GASKET
GUG702506VR

Victor Reinz/Mahle small bore head gasket for A-series engines.



Gasket fitment. Writing side up.

($10.40) £10.40 exc vat

($12.48) £12.48 inc vat
ROCKER COVER GASKET SILICONE 9 STUD HEAD
GUG705009EVO

Upgraded rocker cover gasket made in silicon, ideal for race cars etc where the rocker cover is removed on a regular basis. Mini Spares fitted one on their 1380cc engine road car in August 2014 with great results. Rarely you may require longer rocker...

($8.40) £8.40 exc vat

($10.08) £10.08 inc vat
HEAD UNLEADED LARGE COMP VALVES SMALL BORE 25.5cc
C-AHT87

24.5-25.5cc combustion chamber for use with flat top pistons. This specification of cylinder head is the only modified version for the small-bore based engines Mini Spares supply as it is judged to be the only one worth up-grading to. Based on used c...

($1,242.48) £1.242.48 exc vat

($1,490.98) £1.490.98 inc vat
CYLINDER HEAD ANCILLARY STUD AND NUT KIT PRE 1990
MSSK061

Complete stud, nut and washer kit for the cylinder head ancillaries. Kit contains parts to retain the following:

Inlet/Exhaust manifold to head, studs/nuts/washers

Thermostat housing (no sandwich plate) studs/nuts/washers

H...

($14.00) £14.00 exc vat

($16.80) £16.80 inc vat
MANIFOLD STAINLESS STEEL STUD AND NUT KIT
C-STR282

Minispares own stainless steel manifold stud and 6 sided hexagon nut kit.

For mutipopint nut kit see C-STR287

Quantity required one kit per car

($21.41) £21.41 exc vat

($25.69) £25.69 inc vat
THERMOSTAT HOUSING FITTING KIT (SINGLE TIER TYPE)
12G103FK

This thermostat housing fitting kit, suitable for all single tier thermostat housings. Comes with new studs, nuts, washers and Klinger thermostat housing gasket

($3.35) £3.35 exc vat

($4.02) £4.02 inc vat
HEAD GASKET SMALL BORE COPPER
GEG302

Copper head gasket for 850-998-1100cc. For tuned engines we recommend GUG702506HG copper head gasket or our composite type for competion or performance engines C-AEA647.

($5.63) £5.63 exc vat

($6.76) £6.76 inc vat
HEAD GASKET SET 850/997/998/1100 ALL SMALL BORE IN...
AJM1250

Minispares universal head kit includes a top quality GEG302 copper head gasket, valve cover gasket, manifold gasket, thermostat gasket,heater tap gasket,2x thermostat gasket 6x HS2 carb gaskets,3xHS4 carb gaskets,2x air clea...

($14.38) £14.38 exc vat

($17.26) £17.26 inc vat
VALVE SPRING TWIN SET STD USE
C-AEA525

160lbs on the nose at 400" for standard Cooper S or twin spring set ups. See C-AEA526 and C-AEA527 for later developed springs. These are ok for all standard uses but are improved and uprated over all original factory fitted...

($26.25) £26.25 exc vat

($31.50) £31.50 inc vat
THERMOSTAT HOUSING GASKET LATEST TYPE
GUG705558GM

Genuine version of the thermostat gasket for all A series. Black one side and red the other they are fitted black side to the head. Green to the thermostat.

We have no evidence as yet that they last longer but do look good.

See [lin...

($1.18) £1.18 exc vat

($1.42) £1.42 inc vat
STUD HS4/HIF CARB + some 12G103 HOUSING (5/16")
CHS2514

Universal stud made for fitting the HS4/HIF carb to the manifold (except HS6 with alloy spacer on cast one piece manifold which requires CHS2515 (5.8mm longer)) and it also fits the cylinder head to take the thermostat housi...

($0.78) £0.78 exc vat

($0.94) £0.94 inc vat
STAINLESS STEEL HEATER TAP STUD SET
C-STR285

replacements in stainless steel for the heater tap elbow on the cylinder head.

Quantity required one kit per car

($4.00) £4.00 exc vat

($4.80) £4.80 inc vat
HEAD GASKET SET 850/997/998/1100 ALL SMALL BORE IN...
AJM1250MS

Minispares universal super value head kit includes a head gasket, valve cover gasket, manifold gasket, thermostat gasket, heater tap gasket, 2x thermostat gasket, 6x HS2 carb gaskets, 3x HS4 carb gaskets,2x air cleaner to ca...

($10.42) £10.42 exc vat

($12.50) £12.50 inc vat
ROCKER COVER CORK GASKET (EXCEPT 11 STUD HEADS)
GUG705009VC

Mini cork Rocker cover gasket, suitable for all Minis and A series engines except those with 11 stud heads (see part number GUG5038VC). A must have replacement item when adjusting rocker clearances. see GUGG705009EVO for sil...

($1.30) £1.30 exc vat

($1.56) £1.56 inc vat
MANIFOLD GASKET FOR FUEL INJECTED CARS
GUG704053MG

Special reinforced gasket for injection cars has metal inserts on exhaust ports plus a metal back on the manifold side which makes surface easier to clean when replacing. Often used on Turbo cars when correct gasket is in short supply.


...

($5.10) £5.10 exc vat

($6.12) £6.12 inc vat
ROCKER COVER CHROME FITTING NUT / ERA BUMP STOP NU...
GM038P

Chrome Rocker bolt with UNF thread. Original Rocker cover bolts are dull zinc coated or painted but the chrome type look much better and cheaper.

A longer threaded version CAM6823 was used on prestige Minifin alloy type A series...

($4.20) £4.20 exc vat

($5.04) £5.04 inc vat
CHROME FIXINGS FOR ROCKER COVER
SAC71L

A simple way to dress up that engine compartment while at the same time insuring all the proper hardware is in place. A kit includes 2 each of British made chrome sleeve nuts, spacers and special cup washers, Fits all A & B series engines.

F...

($13.49) £13.49 exc vat

($16.19) £16.19 inc vat
ROCKER COVER T BARS(PAIR)
SAC71

Originally marketed by minispares in the mid 70s so many companies copied them because of their smart looks and ease of fitment they were improved by offsetting the arms to help tighten plus stop the arm falling out when they were straight. These T b...

($6.75) £6.75 exc vat

($8.10) £8.10 inc vat
ROCKER SHAFT HEAVY DUTY
C-AEG399

Direct replacement rocker shaft. Fits all except full needle roller types. Far superior to the stock item! ENSURE YOU ALWAYS TIGHTEN DOWN ALL POSTS EQUALLY to eliminate stress fractures on shaft.



Our special "heavy duty" shaft has ...

($24.00) £24.00 exc vat

($28.80) £28.80 inc vat