SPLIT PIN FOR OUTER CV JOINT (DISC BRAKES ONLY)
GHF510

($0.11) £0.11 exc vat

($0.13) £0.13 inc vat

In stockIn stock
Split pin for the larger size CV joint as fitted to disc brakes. This pin is usually supplied in our normal stock bearing kits. Sold individually.



this will also fit the nut for the rubber cross drive coupling on the gearbox



Split pin for common clevis pin list

GFK101 for CLZ409 handbrake levers to cable on rear drum

GFK102 most mini clevis pins except CLZ409

GHF511 for GCV1105 CV joint and rear hub nut

GHF510 for GCV1013 CV joint

($0.11) £0.11 exc vat

($0.13) £0.13 inc vat

In stockIn stock

Recommended usage 2 x GHF510 to fit one mini.
Driveshafts and CV joints, Drive Flange and Front - Qty 2
Driveshafts and CV joints, Drive Flange and Front - Qty 2

Recommended products
FRONT HUB NUT 1.5/16"AF Large cv joint (33.3MM)
BTA249

1.5/16"AF size nut.

This is about 33.3mm as opposed to the metric size 34mm of BTA249MS favoured by european metric tool kit owners. Sold singly

($9.15) £9.15 exc vat

($10.98) £10.98 inc vat
HUB NUT SPLIT WASHER FOR CV JOINT
FAM9270A

Original genuine sintered split washer for behind the hub nut that goes on the cv joint drive flange.

This is not the cheap old metal type often sold by our competitors which Rover discontinued and changed to sintered for all production car...

($3.53) £3.53 exc vat

($4.24) £4.24 inc vat
FRONT HUB NUT 1.5/16"AF Large cv joint 33.3MM (NON...
BTA249MS

Top quality nut unlike many sold with CV joints from china.

For genuine nut See BTA249 also. Sold singly

($2.25) £2.25 exc vat

($2.70) £2.70 inc vat
Kit products
CLUTCH ARM FITTING KIT FOR 22A2204
22A2204FK

Fitting kit for 22A2204MS clutch arm with a square end. The plate to fit on the end of the arm in this kit is 20mm wide at both ends see 2A3601MS but earlier arms used 25mm down to 20mm wide see 2A3601.
<...

($15.92) £15.92 exc vat

($19.10) £19.10 inc vat
People also bought products
BRAKE PIPE FRONT BRIDGE BETWEEN CYLINDERS LH
21A1207

Pre brent steel brake pipe between the two wheel cylinders on the front drum brakes, LH side.

($9.60) £9.60 exc vat

($11.52) £11.52 inc vat
BRAKE PIPE FRONT BRIDGE BETWEEN CYLINDERS RH
21A1206

Pre brent steel brake pipe between the two wheel cylinders on the front drum brakes, RH side.

($9.60) £9.60 exc vat

($11.52) £11.52 inc vat
MAINTENANCE FREE BALL JOINTS - CAR SET
C-GSJ166KIT

Set of 4 High quality Japanese sealed ball joints.



Developed and tested over a period of three years, the original concept was to manufacture a high quality product, similar to those used on modern vehicles. Unlike the current des...

($220.40) £220.40 exc vat

($264.48) £264.48 inc vat
MAINTENANCE FREE BALL JOINT (SINGLE UNIT)
C-GSJ166

High quality sealed ball joints from Mini Delta Japan.



Developed and tested over a period of three years, the original concept was to manufacture a high quality product, similar to those used on modern vehicles. Unlike the current ...

($57.00) £57.00 exc vat

($68.40) £68.40 inc vat
MINISPARES EVOLUTION RUBBER SUSPENSION CONE
FAM3968EVO

Genuine Mini Spares standard performance cone utilizing 20 years of elastomer/rubber technology from our competition cones manufacturer. Only beeen available since 02/09/2020 and proudly made in the UK with 10,000 sold by 2023.

Original cone...

($40.88) £40.88 exc vat

($49.06) £49.06 inc vat
SUSPENSION KNUCKLE JOINT WITH POLY BOOT GAITER
GSV1118EVO

Genuine Mini Spares UK made complete joint with the following specifications,

correct dimensions and shape of pin and ball in EN24T, using correct spec grease,

genuine original shape cup using correct material (21A423MS...

($4.88) £4.88 exc vat

($5.86) £5.86 inc vat
SUSPENSION KNUCKLE FRONT ONLY 1990 ON WITH POLY BO...
GSV1264EVO

Genuine Mini Spares UK made joints are complete with the following specifications, correct dimensions and shape metal knuckle in EN24T, with the genuine cup made in original material and correct shape (21A423MS) and an upgraded poly boot...

($6.75) £6.75 exc vat

($8.10) £8.10 inc vat
POLY UPGRADE TRACK ROD END/KNUCKLE GAITER
21A425EVO

Polyurethane upgraded gaiter for all knuckle joints and many track rod ends

For standard rubber versions see 21A425

please note- this does not fit all track rod ends as so many genuine and aftermarket parts have been s...

($2.10) £2.10 exc vat

($2.52) £2.52 inc vat
DAMPER CAPTIVE NUT PLATE
14A6948

Captive nut plate that sits behind the damper bracket on the inner wing/bulkhead to attach the damper brackets. 2 PER SIDE.

($4.14) £4.14 exc vat

($4.97) £4.97 inc vat
BRAKE PIPE COPPER NICKEL WITH 2 10MM ENDS 22" LONG
HMK022

NICKEL copper easy bend brake pipe with 2 metric male unions. 22"long, for 1988 on master cylinder lower outlet to PDWA valve outlet nearest to wing-other pipe is HMK026-both for left or right hand drive.

These pipes are retail...

($9.89) £9.89 exc vat

($11.87) £11.87 inc vat
DAMPER BILSTEIN B4 GAS FRONT
19-221694

Standard gas filled replacement front shock absorber from Bilstein.



Non hand adjustable front damper guide ratings

442001 KYB standard replacement

342001 KYB Gas filled 25% upgrade on sta...

($21.00) £21.00 exc vat

($25.20) £25.20 inc vat
BRAKE PAD SPLIT PINS ONLY FOR VENTED CALIPERS (KIT...
GBK1011

4 pins supplied (clips are no longer available)

($0.80) £0.80 exc vat

($0.96) £0.96 inc vat
BRAKE PAD SPLIT PIN ONLY FOR VENTED CALIPERS
PS610242

Correct size and length brake pad pin for the caliper using 8.4" disc size and vented calipers.

($0.21) £0.21 exc vat

($0.25) £0.25 inc vat
BRAKE PAD SET 998 COOPER ULTIMAX
GBP102ULTIMAX

Road use pads but for performance use C-AHT223GREEN these are original size 2.375" which fit later 997 cooper- but if you have the very early small pad type, 2.125" wide for 997cc less split pin holes, these are nearly obsolete you can g...

($13.13) £13.13 exc vat

($15.76) £15.76 inc vat
BRAKE PADS 8.4 DISC ULTIMAX ROAD USE
GBP281ULTIMAX

For use on 8.4" wide standard brake disc calipers, 2.920"wide.

This is the Ultimax upgrade which produces less brake dust which destroys alloy wheels. For the upgraded version of this see C-AHT16GREEN.

A set of split pins are availa...

($28.05) £28.05 exc vat

($33.66) £33.66 inc vat
BRAKE PAD SET ULTIMAX STREET METRO 4 POT
GBP258ULTIMAX

A great street upgrade for 4 pot calipers giving off less brake dust and better efficiency.A set of split pins and metal retaining clips are available as GBK1025

($32.67) £32.67 exc vat

($39.20) £39.20 inc vat
BRAKE PAD SET ULTIMAX STREET 7.5 DISC
GBP103ULTIMAX

Our favourite pads as the give less brake pad dust which destroys alloy wheels.

Very durable and great for most road usage. The green upgrade for fast street is C-8G8995GREEN.

($28.16) £28.16 exc vat

($33.79) £33.79 inc vat
BRAKE PADS GREEN KEVLAR 998cc
C-AHT223GREEN

Less Brake Dust and better stopping power!! The best pad available seems to be the only pad set available now as Rover/Unipart etc have all deleted it from their range

($22.50) £22.50 exc vat

($27.00) £27.00 inc vat
BRAKE PADS 8.4 DISC + SPRITE/MIDGET EBC GREEN SUFF
C-AHT16GREEN

the finest brake pad available for mini 8.4" discs or Sprite/Midget cars.

These are for all forms of competition road use.

A set of split pins are available as GBK1010 or with metal retaining clips as GBK1026

($30.75) £30.75 exc vat

($36.90) £36.90 inc vat
BRAKE PADS GREEN STUFF "S" PADS
C-8G8995GREEN

For Cooper S 7.5" wide discs these are our favourite road brake pads as the reduce contamination on alloy wheels by virtue of less brake pad dust, plus they work well with good anti fade properties.

($30.75) £30.75 exc vat

($36.90) £36.90 inc vat