STEERING RACK GAITER KIT ONE LARGE/ONE SMALL GAITE...
GSV1004

($9.00) £9.00 exc vat

($10.80) £10.80 inc vat

In stockIn stock
This gaiter kit with plastic clips fits many Genuine Rover Racks plus many Quinton Hazel. Also fitted the first generation of Quick Racks where the gaiters are different diameter bore sizes- approx 42.4mm and 26.7mm -

6.5"-6.75" Long

17H6298 single gaiter 4.5" long.

BHM7113 gaiter kit 4.5" long.

GRG205 gaiter kit 4.5" long, Genuine.Now obsolete

GSV1004 gaiter kit with 2 diameters 6.5" long, most Quinton Hazel and many quickracks.

GSV1056 gaiter kit 7.5" long.

($9.00) £9.00 exc vat

($10.80) £10.80 inc vat

In stockIn stock

Recommended usage 1 x GSV1004 to fit one mini.
Steering Rack - Qty 1
Steering racks - Qty 1

People also bought products
MAINTENANCE FREE BALL JOINTS - CAR SET
C-GSJ166KIT

Set of 4 High quality Japanese sealed ball joints.



Developed and tested over a period of three years, the original concept was to manufacture a high quality product, similar to those used on modern vehicles. Unlike the current des...

($220.40) £220.40 exc vat

($264.48) £264.48 inc vat
MINI STEERING RACKING FITTING KIT
FAM7306FK

Mini steering racking fitting kit comprising of 2 U-bolts, 4 nyloc nuts, 2 plastic anti friction stipes, the foam rack to body seal and the half nuts to lock the track rod ends

($16.13) £16.13 exc vat

($19.36) £19.36 inc vat
MK4 TYPE SELF TAPPING COUNTERSUNK STEERING COLUMN ...
AC606051

Screw for MK4(1976) onwards steering cowl at dash end.

($0.40) £0.40 exc vat

($0.48) £0.48 inc vat
SCREW FOR MK4 TYPE STEERING COLUMN COWL 7/8 LONG
AT606084

Screw for MK4 (1976) onwards BHM7085 plastic steering cowl, 2 required. Sold singly.

($0.40) £0.40 exc vat

($0.48) £0.48 inc vat
MOUNTNEY WOOD RIM 14" SEMI DISHED SLOTTED STEERING...
43SPCW

This woodrim steering wheel requires a centre boss to suit your particular car and is the best value and quality wheel around in its class. Brightwork 3 spoke

centre design.

($117.21) £117.21 exc vat

($140.65) £140.65 inc vat
STEERING COLUMN PEDALBOX BRACKET PLATE
21A2464

Retaining plate on steering column pre MPI.

($7.50) £7.50 exc vat

($9.00) £9.00 inc vat
SHEAR BOLT FOR STEERING LOCK FOR TWIN POINT MINI
51K4008

Shear bolt M8 metric thread 22mm (7/8")long

($2.25) £2.25 exc vat

($2.70) £2.70 inc vat
7/16 NUT FOR BALL JOINT high tensile
FNZ507

High tensile nut for swivel pins - supplied in kits GSJ166MS and GSJ166.

($0.61) £0.61 exc vat

($0.73) £0.73 inc vat
STEERING RACK SPACER - NON GENUINE
37H8064

Nylon bush for original C.A.M steering racks fitted by Leyland/Rover.

($4.71) £4.71 exc vat

($5.65) £5.65 inc vat
MOTOLITA BOSS MK4 76-96
MLW111745M

For all MK4 minis from 1976 until 1996 air bag models arrived.

Models from 1989 on only have one cancelling pin,match the boss to the existing wheel and remove unwanted pin.

($145.50) £145.50 exc vat

($174.60) £174.60 inc vat
STEERING WHEEL BOSS V3. NOT MPI
SWABC

Required to fit Mountney wheels to your Mini. The Mkl adapter Black boss has a built-in horn-push. The Mkll (BOSS/V3) is for cars with the horn on the stalk.

($17.51) £17.51 exc vat

($21.01) £21.01 inc vat
STEERING RACK U BOLT
2A6208

Special shaped U bolt for holding the steering rack in place. Every mini uses 2 of these and make sure you fit the 21A2553 plastic anti friction strips. Sold singly

($7.28) £7.28 exc vat

($8.74) £8.74 inc vat
STEERING RACK TO BODY SEAL
21A30

The sponge dust shield that fits over the splined area of the steering rack as it bolts up against the bulk head. Usually it is sold with the centre part cut but not pushed out, but it pops out easily and is shown on our picture as a reference only. ...

($0.48) £0.48 exc vat

($0.58) £0.58 inc vat
STEERING RACK 2.2 TURN QUICKRACK RHD BRAND NEW
C-AJJ1570

Quickracks-If you are interested in performance driving then you know reaction time from the driver to the car is critical; the time it takes to turn the steering wheel to the desired angle is important! The standard rack is 2.7 turns lock to lock, o...

($99.50) £99.50 exc vat

($119.40) £119.40 inc vat
STEERING COLUMN COWL MK2/3 (WITHOUT STEERING LOCK ...
8G6035

A bit larger than the MK1 to accept the improved indicator switch this fitted

MK2 and MK3 cars until the introduction of the steering locks.

($28.50) £28.50 exc vat

($34.20) £34.20 inc vat
WHEEL CLASSIC 13"LEATHER POLISHED
33SPLBH

the classic looking 13" steering wheel from the 1960s and 70s with round holes in the 3 semi dished polished alloy spokes and a leather rim. For black spokes see 33SBLBH or for wooden rim see 353SPW

($62.60) £62.60 exc vat

($75.12) £75.12 inc vat
MK1 HORN PUSH ASSEMBLY WITH AUSTIN CENTRE MOTIF
27H6943

Horn push assembly for the Mk1 Austin Mini, Mk1 Austin Mini Cooper and Mk1 Austin Mini Cooper S.

For Morris cars, see 27H6944. This horn push assembly can also be supplied without a centre emblem, see 27H6945

($54.00) £54.00 exc vat

($64.80) £64.80 inc vat
STEERING ARM R/H MK II "S" UPGRADE ON MK2 ON
BTA894

Upgraded thicker steering arm as fitted to Cooper S MK2/3 and 1275GT. The Mini MK2 Steering arms were designed to be used with the later model rack that has a tighter turning ratio than the early MK1 rack. The angle of these arms is slightly differen...

($17.60) £17.60 exc vat

($21.12) £21.12 inc vat
STEERING COLUMN PINCH BOLT
BH604111

Bolt for the bottom of the inner steering column to lock it onto the steering rack spline. This is a Rover special fitting bolt with a 1/2" plain shank to fit the inner steering column groove.

As it is an expensive bolt, for any other purpos...

($0.75) £0.75 exc vat

($0.90) £0.90 inc vat
LONGER COMPETITION TRACK ROD END
C-AJJ1572

Longer track rod end for running with negative camber, gives an extra 5mm of adjustment approximately over the standard item. Has consistent thread pattern and perfect design to our requirements to fits all known racks and classed as a competition tr...

($7.92) £7.92 exc vat

($9.50) £9.50 inc vat