MAGNETIC OIL TRAP FOR GEARBOX
HPS6

($34.20) £34.20 exc vat

($41.04) £41.04 inc vat

In stockIn stock
Fits in place of the oil pick up retainer plate on the back of the gearbox this magnetic plug filter collects metal debris from going back into the power unit but should be regularly cleaned. Also available as the ultimate is the same item with a built in filter gauze available as HPS5.

($34.20) £34.20 exc vat

($41.04) £41.04 inc vat

In stockIn stock

Recommended usage 1 x HPS6 to fit one mini.

Alternative products
MAGNETIC OIL TRAP WITH FILTER
HPS5

Fits in place of the oil pick up retainer plate on the back of the gearbox this magnetic plug with filter collects metal debris from going back into the power unit but should be regularly cleaned. A non filter type of theis version is available as [l...

($41.24) £41.24 exc vat

($49.49) £49.49 inc vat
LONG MAGNETIC SUMP DRAIN PLUG
DP1

Magnetic drain plug, plus added length to help gather all those metal bits between oil changes. For all manual Mini's.

($14.93) £14.93 exc vat

($17.92) £17.92 inc vat
Kit contained products
COPPER SUMP PLUG AND BLOCK WASHER
AED172

Mini Copper Sump Drain Plug Washer, also will fit the oil transfer pipe block fitting on Pre 1992 Blocks.

($0.79) £0.79 exc vat

($0.95) £0.95 inc vat
GEARBOX OIL PICK UP PIPE GASKET
22A542B

Gearbox oil strainer to gearbox internal case gasket and also used on the C-AHT54 special oil pick up pipe. One also sits on the outer plate held onto the gearbox outer casing by 2 screws.

($0.24) £0.24 exc vat

($0.29) £0.29 inc vat
People also bought products
PUROLATER FILTER BOWL TO HEAD SEAL
12A1591

This is the large seal for the early type oil filter assembly pre spin on type.

($3.00) £3.00 exc vat

($3.60) £3.60 inc vat
AUTO OIL FILTER ELEMENT ALL AUTOMATIC MINIS
MSF104

MINI Auto only. Minispares brand Paper element for canister type Automtic Mini from the original approved and designated Rover/Unipart source.Much taller than the manual type this filter has to do a lot of work and fits every mini automatic made, but...

($4.27) £4.27 exc vat

($5.12) £5.12 inc vat
OIL FILTER REPLACEMENT ELEMENT PRE 1974
MSF103

Minispares brand Paper element for canister type pre 1974 from the original approved and designated Rover/Unipart source.The more you drive your car, the more frequently you should change your oil. Also check your filter bowl and if it uses oil seal ...

($5.39) £5.39 exc vat

($6.47) £6.47 inc vat
OIL FILTER MPI SPIN ON-(FITS TO BLOCK ONLY)
MSF280

Minispares spin on oil filter from the original suppliers as designated and approved by Rover/Unipart until 2014. Original filter for twin point injection cars where it screws directly into the block.

See GFE210 for shorter fil...

($3.76) £3.76 exc vat

($4.51) £4.51 inc vat
OIL FILTER SPIN ON 1973-1996 not MPI
MSF166

Genuine Minispares spin on oil filter from the original suppliers as designated and approved by Rover/Unipart until 2014 when parts quality selection changed.

Same manufacturer and item as GFE443 but with our livery on so you know you are g...

($3.30) £3.30 exc vat

($3.96) £3.96 inc vat
OIL FILTER FOR MPI WHEN RUNNING AN OIL COOLER KIT
GFE210

Short oil filter for MPI when space is restricted through modification or optional oil cooler fitted



MANN supplied Filter



this short filter DOES NOT fit the MPI block. it ONLY fits the oil cooler take off

($9.68) £9.68 exc vat

($11.62) £11.62 inc vat
MILLERS ENGINE FLUSH - 250ML
MILLERS005

Engine flush removes sludge and other unwanted deposits from oil galleries before new clean oil is added meaning the oil stays cleaner between changes. One bottle treats 4-6 litres of oil.

($4.96) £4.96 exc vat

($5.95) £5.95 inc vat
OIL FILTER HOUSING RACE/ROAD 1991 ON
LPX10026RACE

Billet oil filter housing for engines with 12A prefix-Uses 88G402 gasket.

The original is no longer available but this is an upgraded version to stop flexing and cracking especially sort after by racers.

Should be used ...

($63.75) £63.75 exc vat

($76.50) £76.50 inc vat
CLASSIC CASTROL PINT METAL POURING JUG
J105

Classic Castrol Metal pouring jug, 1 pint.

($10.66) £10.66 exc vat

($12.79) £12.79 inc vat
MPi PIPERCROSS PERFORMANCE AIR FILTER KIT
PK071

The kit includes a foam air filter with polished mesh cover, base plate with flexible fitting neck and a full fitting kit. The Pipercross reticulated foam filter offers increased air flow over standard paper filters, which In turn gives improved torq...

($69.00) £69.00 exc vat

($82.80) £82.80 inc vat
AIR FILTER TRUMPET SOCKS PAIR
PXC1050

pair of socks for rampipes on carbs. These should be fitting dry, no oil required.

($22.50) £22.50 exc vat

($27.00) £27.00 inc vat
TOOL09 WRENCH + MSF166 OIL FILTER
GS102440

Tool to remove the oil filter and a genuine spin on Mini Spares filter pre MPI cars, as sold by Rover and Unipart but in our livery until their closure.

($29.03) £29.03 exc vat

($34.84) £34.84 inc vat
HIF6/HIF44 PIPERCROSS CONE AIR FILTER KK150
C1504

Pipercross KK150 chrome top, low-conical, foam air filter for 1.75" SU carb.

Full flow, high capacity competition foam air filters; the KK range of Pipercross high performance air filters offer the ultimate in engine filtration, and are...

($36.00) £36.00 exc vat

($43.20) £43.20 inc vat
OIL FILTER MSF166 AND OIL MILLERS001 SPECIAL OFFER
SO1

One spin on filter and Genuine Millers Mini 20W50 oil

($28.06) £28.06 exc vat

($33.67) £33.67 inc vat
MINISPARES OIL PLUS MSF166 OIL FILTER
SO4

Minispares own 5 litres of 20W50 mineral oil, see GUL7005T plus a spin on oil filter pre 1996 from the original supplier to Rover/Unipart, see MSF166

($24.72) £24.72 exc vat

($29.66) £29.66 inc vat
K&N HS4/H4/HIF38 1.5" CONE AIR FILTER
56-9320

For 1.5" carb applications, this Conical K&N filter is the answer. Fits single or dual carb setups. Sold individually.

K & N airfilters are unsurpassed in performance yet are compact in size to fit in even the most cramped quarters. These d...

($89.37) £89.37 exc vat

($107.24) £107.24 inc vat
HS4/HIF38 PIPERCROSS CONE AIR FILTER KK15
C1502

Pipercross KK150 chrome top, low-conical, foam air filter for 1.5" SU carb.

Full flow, high capacity competition foam air filters; the KK range of Pipercross high performance air filters offer the ultimate in engine filtration, and are ...

($36.00) £36.00 exc vat

($43.20) £43.20 inc vat
AIR FILTER ELEMENT K&N REPLACEMENT SPi & MPi
E9172

Just what injection engines require, this element will increase the breathing

to the engine which can only result in better performance all round. Once fitted these special elements can last nearly a life time if cleaned and oiled regularly ...

($43.05) £43.05 exc vat

($51.66) £51.66 inc vat
BREATHER/FILTER FOR CRANKCASE BY K&N
62-1010

Chrome top crankcase vent filter with metal 1/2" inlet flange, 47mm filter diameter x 1.5" high(40mm). Another cleanable filter from K&N.

($23.55) £23.55 exc vat

($28.26) £28.26 inc vat
K&N HIF6/44 CONE K&N FILTER
56-9330

Highly polished chrome cover cone filter.

The cotton gauze filter design from K&N provides positive gain that you would expect. Average filter life is 100,000 miles.

'Conical' 5.875" diameter x 2" high, fits 1.75" SU carb.

...

($97.49) £97.49 exc vat

($116.99) £116.99 inc vat