CARBURETTOR SINGLE HS2 1.25"
HS2

($499.91) £499.91 exc vat

($599.89) £599.89 inc vat

In stockIn stock
All 850 minis and early 998cc engines used the HS2 carb. These are new and have an extra emmission tube on the body which can be blanked off,unless you have an emmission type side plate,or front timing cover. Supplied with AAV needle

($499.91) £499.91 exc vat

($599.89) £599.89 inc vat

In stockIn stock

Recommended usage 1 x HS2 to fit one mini.
Carburettors HS2 - Qty 1

People also bought products
CARB BALANCER TOOL
MSA1003

This tool/gadget allows you to balance both air intakes on either twin SU or twin choke carbs so they flow exactly the same to give better performance and economy.

($28.50) £28.50 exc vat

($34.20) £34.20 inc vat
CARB HS2 SERVICE KIT FOR SU CSK51
WZX1851

Carb repair kit less spindle and dbutterfly for single HS2 1.25"carbs-includes float needle valve and jet.

($55.31) £55.31 exc vat

($66.37) £66.37 inc vat
CARB BUTTERFLY KIT 1.25 HS2
WZX1320

The butterfly kit for HS2 carbs and the spindle kit is WZX1310

($15.99) £15.99 exc vat

($19.19) £19.19 inc vat
CARB HS2 FULL REBUILD KIT
CRK104

For HS2 single carbs this is the Complete kit of the parts required for an overhaul kit- if you do not require the spindle and disc and bushes see WZX1851

($73.50) £73.50 exc vat

($88.20) £88.20 inc vat
PETROL PIPE HOSE 1 METRE
PETROLPIPE

Special rubber hose 1/4" bore for use on petrol lines, this is in black and not armour plated outside but does have internal reinforcing. Supplied as pre cut 1m length with 2 clips and is safe to use with modern fuels with higher ethanol content. SAE...

($3.27) £3.27 exc vat

($3.92) £3.92 inc vat
FLOAT NEEDLE VALVE HS2/4/6 (VITON TIPPED)
WZX1100A

This is the original type of needle valve that governs the plastic fuel float in your SU carb.

An alternative better upgraded version is available as CA90.

($10.38) £10.38 exc vat

($12.46) £12.46 inc vat
HS2 JET BEARING KIT.FIXED
WZX1341

This kit for the HS2 type carb includes the fixed needle type bearing jet(sleeve)the adjusting nut,spring and locknut where you adjust your carbs.

.Quantity required for single carb-1 set or for twin carbs 2 sets required

($13.50) £13.50 exc vat

($16.20) £16.20 inc vat
ACCELERATOR CABLE NYLON SLEEVED EXTRA LONG
C-AHT85

Our heavy duty throttle cable is superior in many ways.

A nylon interior ensures smooth operation. The outer cable is 32mm longer and inner is 95mm longer than the standard one.

Cable to carb bolt is ACC5062.

($6.10) £6.10 exc vat

($7.32) £7.32 inc vat
10" BRAIDED PETROL PIPE 1/4" BORE
PPK4

Before the days of Aeroquip, Minis were fitted with braided steel rubber fuel lines. They should be used in place of rubber for all fuel lines in the engine compartment. They come made to length, with rubber end caps. 1/4" bore size.

Orang...

($4.00) £4.00 exc vat

($4.80) £4.80 inc vat
CARB DASHPOT OIL FOR SU RANGE
BDR125

Correct and original thickness oil for SU carb dashpots.

($7.43) £7.43 exc vat

($8.92) £8.92 inc vat
FIXED NEEDLE EB
AUD1149

standard 850 single fixed carb needle sold per item

($6.75) £6.75 exc vat

($8.10) £8.10 inc vat
CARB SPRING (RED 4.5oz) HS TYPE CARBS
AUC4387

Standard spring for all HS2 and HS4 on minis except for the 997/998 Cooper from 1964-9 and H4 special tuning carbs which used AUC4587.

($7.59) £7.59 exc vat

($9.11) £9.11 inc vat
CARB HS4 FULL REBUILD KIT PLAIN DISC
CRK219

For HS4 single pre waxstat carbs with red jet this is the full rebuild kit with the spindle and plain throttle disc and bushes--- see CRK227 for disc with overrun valve.

($79.40) £79.40 exc vat

($95.28) £95.28 inc vat
CHOKE CABLE TRUNNION ACH9042 NIPPLE & 53K3503 SCRE...
AUE34

Complete with screw the choke trunnion is used on nearly all SU carb linkages.

See ACC5062 for carb cable link trunnion also.

($2.03) £2.03 exc vat

($2.44) £2.44 inc vat
GASKET 1.25" HS2 CARB (GUG705831GM)
1G2624B

Manifold to carb gasket for HS2 single and twin carbs, usually 3 per carb required.

($0.47) £0.47 exc vat

($0.56) £0.56 inc vat
CARB 5MM INSULATOR SPACER FOR 1.25" HS2 CARB
1G2623

The spacer block for between manifold and HS2 single carbs and use 1G2624 gaskets (3 of).

($13.74) £13.74 exc vat

($16.49) £16.49 inc vat
"T" PIECE 1/4" SU TWINS MTP001
12H889

Used in petrol fuel lines to take 1/4" petrol hoses it is used mainly on twin carb set ups for petrol being diverted to the 2 carbs.

($4.50) £4.50 exc vat

($5.40) £5.40 inc vat
ACCELERATOR RETURN SPRING FOR HS2/4 CARB
1E5537

This throttle return spring fitted every HS2/4 single SU carb and also on the twins as fitted by the factory. Twin carbs used AEC2075 for choke return. Total length 90mm.

($1.90) £1.90 exc vat

($2.28) £2.28 inc vat
CARBURETTOR LEVER PIN
ACC5062

Pin to hold the accelerator cable which locates in the carb bracket lever. Supplied as originally fitted with washers, nut and split pin plus a proper machined hole for the cable unlike many others on the market- which come either bare or with wrong ...

($2.93) £2.93 exc vat

($3.52) £3.52 inc vat
FIXED NEEDLE AN
AUD1478

"AN" needle for your SU carb.

($6.75) £6.75 exc vat

($8.10) £8.10 inc vat