DISTRIBUTOR SHIELD COVER ONLY

The current large plastic shield without any fittings or clips, to cover the engine electrics. Might need slight modifications for some SPI cars but we have fitted them on our own cars without any problems.

The plastic clips are available as...

($21.17) £21.17 exc vat

($25.40) £25.40 inc vat

BRACKET DIZZY SHIELD TO TOP OF ROCKER COVER (SINGL...

NJU10002

Bracket for attaching the Distributor water shield to the rocker cover bolts.

Does not come with fixing clips, these are available seperately as part number 13H6461.

($6.14) £6.14 exc vat

($7.37) £7.37 inc vat

DISTRIBUTOR SHIELD COVER FOR ELECTRICS LATEST TYPE

BHM1675

The current genuine large plastic shield with all fittings required to cover the engine electrics.

Parts are available seperately:

The plastic clips are 13H6461.

Upper bracket is NJU10002 x 2 requ...

($29.79) £29.79 exc vat

($35.75) £35.75 inc vat

VAC UNIT 45d/59d FOR 1275cc

37H8379MS

Fits our 45/59d distributors, 1275cc as fitted to 12G4180 and ADU3825

Along with our distributor manufacturer we have found this to be the best for modern day fuels for all 45 or 59d distributor for 1275cc uses as...

($6.60) £6.60 exc vat

($7.92) £7.92 inc vat

DISTRIBUTOR 65D 90-93 HIF44 CARB COOPER

AUU1536

Electronic Ignition distributor, fitted as standard to all 1300 Carb Cooper models. Also Metro 1275cc engine.

Replacement service items for this are:

Cap GDC156

Rotor arm GRA2143

Should be used with GC...

($80.50) £80.50 exc vat

($96.60) £96.60 inc vat

VACUUM PIPE ELBOW

12B2062

The stock vacuum advance distributor is connected to the carb/manifold by a small rubber joint that in turn is mated to metal line that fits the distributor. If the little rubber connector is deteriorated it could allow a vacuum leak at the carb and ...

($2.25) £2.25 exc vat

($2.70) £2.70 inc vat

DIST CLAMP PRE A PLUS

501134

This distributor clamp should not be bent; if it is, either you can't get the dizzy all the way in or it won't grip.

($10.70) £10.70 exc vat

($12.84) £12.84 inc vat

CONNECTOR FOR ADVANCE RETARD VACUUM PIPE

12B2095

Straight rubber connector pipe. The standard vacuum advance distributor is connected to the carb/manifold by a small rubber joint that in turn is mated to metal line that fits the distributor. If the little rubber connector is deteriorated it could a...

($0.90) £0.90 exc vat

($1.08) £1.08 inc vat

DISTRIBUTOR SHIELD COVER FOR ELECTRICS LATEST TYPE

BHM1675

The current genuine large plastic shield with all fittings required to cover the engine electrics.

Parts are available seperately:

The plastic clips are 13H6461.

Upper bracket is NJU10002 x 2 requ...

($29.79) £29.79 exc vat

($35.75) £35.75 inc vat

CONDENSER DUCELLIER

GSC2113

ducelier distributors require GDC214 red cap,GCS119 points and GRA2123 rotor arm to go with this condenser--nothing else fits

($3.92) £3.92 exc vat

($4.70) £4.70 inc vat

CONDENSER FOR 23/25D DISTRIBUTOR

GSC2111

for 23/25D distributor but see [link]47H5250[/link} for resin type upgrade with 3m of wire as opposed to every aftermarket type analysed with only 1.5m of wire.

its worth paying extra for the condenser and rotor arm [link]GRA101]/link]

($2.45) £2.45 exc vat

($2.94) £2.94 inc vat

DISTRIBUTOR CAP 45D/59D

GDC136

Fited to Lucas type distributors with 45D body in 1974 until 1990 when electronic type that was held on by 2 screws appeared as oppossed to this clip on this type. If you need a new distributor clip-we have them as GDC136CLIP.

($4.49) £4.49 exc vat

($5.39) £5.39 inc vat

PERFORMANCE 8mm PLUG LEAD SET RED

C-27H7779RED

Lots of things have been written about performance plug ignition wires but regardless of what you believe we all know that good wires are a must. This special competiton wires set from the Lucas factory has 8mm wire and the highest performance, no br...

($13.19) £13.19 exc vat

($15.83) £15.83 inc vat

CONDENSER 45D/59D RESIN TYPE ORIGINAL

GSC110

original Lucas type RESIN BASED CONDENSER made for the 45/59D type distributor if you want a quality item rather than the cheaper inferior parts available. Filled with 3m of winding inside as per original Lucas but every copy analysed to date has ...

($7.50) £7.50 exc vat

($9.00) £9.00 inc vat

COIL BRACKET 1969-95 LUCAS TYPE COILS STAINLESS ST...

12G2994SS

Stainless steel coil bracket for 1970-1996 cars.

($9.45) £9.45 exc vat

($11.34) £11.34 inc vat

BRACKET DIZZY SHIELD TO TOP OF ROCKER COVER (SINGL...

NJU10002

Bracket for attaching the Distributor water shield to the rocker cover bolts.

Does not come with fixing clips, these are available seperately as part number 13H6461.

($6.14) £6.14 exc vat

($7.37) £7.37 inc vat

DISTRIBUTOR SHIELD COVER ONLY

NJT10004

The current large plastic shield without any fittings or clips, to cover the engine electrics. Might need slight modifications for some SPI cars but we have fitted them on our own cars without any problems.

The plastic clips are available as...

($21.17) £21.17 exc vat

($25.40) £25.40 inc vat

ROTOR ARM FOR ELECTRONIC DIZZY 1990-96

GRA2143

Rotor arm for all A series electric distributors when points are not fitted, except for turbo. The distributor cap for this rotor arm is GDC156.

($1.80) £1.80 exc vat

($2.16) £2.16 inc vat

ROTOR ARM FOR 45D/59D SEE GRA2130 FOR RELIABILITY

GRA2114

Post '74 cars with points or electronic distributors use this rotor arm.

If you originally wanted an upgraded version, the Turbos used the blue type cap and points GDC143 and GRA2130 respectively to contend with ext...

($2.43) £2.43 exc vat

($2.92) £2.92 inc vat

DISTRIBUTOR CAP ELECTRONIC IGNITION

GDC156

This was the first mini distributor cap to have screws hold the cap to the body from about 1990 on, when electonic ignition was introduced. Therefore there is no points or condenser but the rotor arm to use is GRA2143. Fits all 1992 onwa...

($5.45) £5.45 exc vat

($6.54) £6.54 inc vat

CONTACT POINTS FOR 45D 1974-80(RED PLASTIC)

GCS2118

These points were fitted from 1974-80 when the distributors became a 45D type,

the distributor cap shape changed also to GDC136 and likewise rotor arm GRA2114 and condenser GSC2109.

($2.90) £2.90 exc vat

($3.48) £3.48 inc vat

COIL FOR ELECTRONIC IGNITION - '89 ON

GCL143

This is the standard non ballast coil as used on the late Mini with factory electronic ignition for use with 65D distributor.0.9ohms.

GCL143 was the Genuine Rover part fitted part on 1275cc from 1990.

0.9ohms

GCL2...

($20.69) £20.69 exc vat

($24.83) £24.83 inc vat

IGNITION SWITCH DASH MOUNTED

13H337

MK1/2/EARLY MK3. 3 position spring loaded type. Comes with barrel.

For barrel only use part number 24G1345.

($8.56) £8.56 exc vat

($10.27) £10.27 inc vat