MANIFLOW COOPER FREEFLOW EXHAUST MANIFOLD

Maniflow's tubular reproduction of the original Cooper 997/998cc exhaust manifold manufactured out of the same tubing as the STD bore LCB. This free flow manifold works vey well at lower speed pick up, the LCB is noisier but better at the top end of ...

($87.45) £87.45 exc vat

($104.94) £104.94 inc vat

MANIFLOW COOPER FREEFLOW EXHAUST MANIFOLD

C-STR816

Maniflow's tubular reproduction of the original Cooper 997/998cc exhaust manifold manufactured out of the same tubing as the STD bore LCB. This free flow manifold works vey well at lower speed pick up, the LCB is noisier but better at the top end of ...

($87.45) £87.45 exc vat

($104.94) £104.94 inc vat

RC40 REAR TWIN BOX SYSTEM FROM CATALYST BACK

C-STR812

Rear RC-40 twin box system to fit catalyst for cars built late 1991 on SPI(not early carb coopers). It has the hanger rods fited for mounting onto the rubber type straps. This makes it a twin box system with a little throatier pleasing note, but a mu...

($67.34) £67.34 exc vat

($80.81) £80.81 inc vat

EXHAUST TAILPIPE TRIM FOR VAN/ESTATE fits 45mm ID

RC40-005

Stainless steel tailpipe trim with hanger bracket designed for fitting to the tailpipe of RC40 rear box as an extension piece. This is part of our RC40PACKAGE015 kit for Van/Estate and Pickup exhaust system when a freeflow o...

($25.44) £25.44 exc vat

($30.53) £30.53 inc vat

STAINLESS STEEL RC40 SIDE EXIT REAR SILENCER STAND...

RC40-051

The popular RC-40 exhaust system was updated to the millennium range for the year 2000. All retain the optimum size 1.75" tubing for maximum performance and efficiency, but we now offer a choice of tailpipe size and configuration. In addition, they n...

($158.01) £158.01 exc vat

($189.61) £189.61 inc vat

TWIN BOX RC40 EXHAUST

RC40

Mini Spares genuine RC40 system has justifiably earned the reputation of the best exhaust ever made for the Mini. Mild steel with stainless steel tailpipe. Typically used with an LCB manifold it gives great performance with a mellow soun...

($60.50) £60.50 exc vat

($72.60) £72.60 inc vat

DOWN PIPE RC40 TWINBOX TO FREEFLOW C-STR816 MANIFO...

RC40-001

Original RC40 downpipe. This pipe is the correct length to fit the rear twin box RC40 system to the original Cooper and "S" range of manifolds or the replacement C-STR816 Freeflow manifold. If fitting to an LCB ...

($8.88) £8.88 exc vat

($10.66) £10.66 inc vat

EXHAUST U BOLT CLAMP 1 3/8" 35mm

GEX9003

($0.62) £0.62 exc vat

($0.74) £0.74 inc vat

MANIFOLD GASKET INLET / EXHAUST

AJM601

Manifold gasket fitted to all A series pre 1992 except Turbo which had a reinforced exhaust ports GUG704063MG and SPI from 199. From 1991 on a new better gasket with reinforced exhaust ports and backing was fitted GUG704053MG

($0.96) £0.96 exc vat

($1.15) £1.15 inc vat

EXHAUST U BOLT CLAMP 1" 7/8" 48mm

GEX9008

Exhaust hanger clamp for 1.875" pipe.

For joining rear box to downpipe on RC40 and downpipe to manifold on RC40.

($0.73) £0.73 exc vat

($0.88) £0.88 inc vat

DOWNPIPE TO GEARBOX EXHAUST BRACKET

GEX7526

This bracket bolts on the gearbox and attaches to the exhaust front downpipe clip GEX7053.

($11.00) £11.00 exc vat

($13.20) £13.20 inc vat

RC40 EXHAUST FITTING KIT

RC40FK

Complete mounting kit for the RC40 exhaust. Includes all new rubber mounts, brackets and clamps.

($6.85) £6.85 exc vat

($8.22) £8.22 inc vat

GASKET FOR EXHAUST CATALYTIC CONVERTER

GEX7761

Metal gasket for the catalyst and is the same both ends for Cooper 1275CC RSP early cars, but only fitted on the front to later cars. If you cannot fit this gasket on the rear your car does not need one.

($0.67) £0.67 exc vat

($0.80) £0.80 inc vat

STAINLESS STEEL DOWNPIPE FOR FREEFLOW TO REAR SILE...

RC40-058

The popular RC-40 exhaust system was updated to the Millennium range in 2000. All retain the optimum size 1.75" tubing for maximum performance and efficiency, but we now offer a choice of tailpipe size and configuration. In addition, they now have st...

($50.15) £50.15 exc vat

($60.18) £60.18 inc vat

EXHAUST RUBBER MOUNTING FROM 1990 ON

DBP7104

2 reqd but sold seperately-From 1990 rover started fitting the hanging rubber exhaust mounting straps which push onto rods on the exhaust and rear subframe similar to the old metro. These were used right to the end of production on minis.

($3.00) £3.00 exc vat

($3.60) £3.60 inc vat

PERFORMANCE STAGE 1 KIT 998 WITH LARGE BORE CENTRE...

C-STN17A

STAGE 1 KIT. Mini Spares bolt-on performance kit for 998 and 1098 engines.

Similar to C-STN17 except it has a large bore centre exit exhaust.

Kit includes - single box RC40 Millennium large bore centre exi...

($291.18) £291.18 exc vat

($349.42) £349.42 inc vat