EXHAUST RUBBER MOUNTING FROM 1990 ON

2 reqd but sold seperately-From 1990 rover started fitting the hanging rubber exhaust mounting straps which push onto rods on the exhaust and rear subframe similar to the old metro. These were used right to the end of production on minis.

($3.00) £3.00 exc vat

($3.60) £3.60 inc vat

STAINLESS STEEL DOWNPIPE FOR FREEFLOW TO REAR SILE...

RC40-058

The popular RC-40 exhaust system was updated to the Millennium range in 2000. All retain the optimum size 1.75" tubing for maximum performance and efficiency, but we now offer a choice of tailpipe size and configuration. In addition, they now have st...

($50.15) £50.15 exc vat

($60.18) £60.18 inc vat

EXHAUST U BOLT CLAMP 1" 7/8" 48mm

GEX9008

Exhaust hanger clamp for 1.875" pipe.

For joining rear box to downpipe on RC40 and downpipe to manifold on RC40.

($0.73) £0.73 exc vat

($0.88) £0.88 inc vat

STAINLESS STEEL RC40 CAT TO REAR BOX FOR MILLENNIU...

RC40-057

This is the stainless steel pipe that bolts to the catalyst and then allows you to fit the rear silencer of your choice.

($43.64) £43.64 exc vat

($52.37) £52.37 inc vat

STAINLESS STEEL RC40 CENTRE EXIT WITH DTM TAIL PIP...

RC40-055

The popular RC-40 exhaust system has been updated for the year 2000. All retain the optimum size 1.75" tubing for maximum performance and efficiency, but we now offer a choice of tailpipe size and configuration. This one is the centre exit 2" outlet ...

($192.66) £192.66 exc vat

($231.19) £231.19 inc vat

STAINLESS STEEL RC40 SIDE EXIT REAR SILENCER LARGE...

RC40-053

The popular RC-40 exhaust system was updated to the millennium range for the year 2000. All retain the optimum size 1.75" tubing for maximum performance and efficiency, but we now offer a choice of tailpipe size and configuration. This is 2.25" large...

($161.00) £161.00 exc vat

($193.20) £193.20 inc vat

CATALYST CONVERTOR SPORTS TYPE MILLENNIUM RANGE

RC40-015

Part of our millennium range of exhausts, this is the 200 Cell sport cat.

Catalytic converter will fit all mini models and if you require new studs the part number is FB110351 and the nuts to fit the studs are NV110051<...

($217.50) £217.50 exc vat

($261.00) £261.00 inc vat

STAINLESS STEEL RC40 CAT TO REAR BOX FOR MILLENNIU...

RC40-057

This is the stainless steel pipe that bolts to the catalyst and then allows you to fit the rear silencer of your choice.

($43.64) £43.64 exc vat

($52.37) £52.37 inc vat

DOWN PIPE MILLENIUM VERSION OF AN180V

RC40-003

Better flowing as it has correct shape on every bend and painted grey

($20.70) £20.70 exc vat

($24.84) £24.84 inc vat

STAINLESS STEEL RC40 CENTRE EXIT STANDARD BORE REA...

RC40-054

The popular RC-40 exhaust system was updated to the millennium rangefor the year 2000. All retain the optimum size 1.75" tubing for maximum performance and efficiency, but we now offer a choice of tailpipe size and configuration. This is standard bor...

($153.17) £153.17 exc vat

($183.80) £183.80 inc vat

STAINLESS STEEL DOWNPIPE WITH MID BOX FOR FREEFLOW...

RC40-060

The popular RC-40 exhaust system was updated to the Millennium range in 2000. All retain the optimum size 1.75" tubing for maximum performance and efficiency, but we now offer a choice of tailpipe size and configuration. Front pipes come either "str...

($117.80) £117.80 exc vat

($141.36) £141.36 inc vat

STAINLESS STEEL RC40 SIDE EXIT REAR SILENCER LARGE...

RC40-053

The popular RC-40 exhaust system was updated to the millennium range for the year 2000. All retain the optimum size 1.75" tubing for maximum performance and efficiency, but we now offer a choice of tailpipe size and configuration. This is 2.25" large...

($161.00) £161.00 exc vat

($193.20) £193.20 inc vat

RC40 MIDDLE BOX ( CAT TO REAR BOX )

RC40-014

Part of our millennium range of exhausts, this is the silencer that bolts to the catalyst enabling you to fit another silencer to it of your choice to give a 2 box rear silencer system for quietness.

($71.75) £71.75 exc vat

($86.10) £86.10 inc vat

STAINLESS STEEL DOWNPIPE WITH MIDDLE BOX FOR C-AEG...

RC40-061

The optimum size 1.75" tubing for maximum performance and efficiency now offering a choice of tailpipe size and configuration. Front pipes come either "straight through" for use only with the rear muffler, or with a built-in resonator for quieter twi...

($110.09) £110.09 exc vat

($132.11) £132.11 inc vat

LINK PIPE TO REPLACE CATALYTIC CONVERTER

C-ARA664

If you wish to delete the catalyst (legal restrictions apply, so check to see if you are allowed) this pipe is specially made to replace it.

($32.99) £32.99 exc vat

($39.59) £39.59 inc vat

STAINLESS STEEL MIDDLE SILENCER FROM CAT TO REAR S...

RC40-062

This is for cars with a catalyst fitted and you require a twin box exhaust system.

This small silencer fits from the catalyst to the rear exhaust box of your choice.

($107.93) £107.93 exc vat

($129.52) £129.52 inc vat

RC40 MIDDLE BOX & DOWNPIPE MILD STEEL

RC40-013

When fitting to an LCB cut 5-8" off.

This downpipe and centre box are made the correct length for the freeflow manifold but when fitting to a LCB the flanged end should be cut off 5"-8" from the end. The downpipe and exhaust shoul...

($63.69) £63.69 exc vat

($76.43) £76.43 inc vat

STAINLESS STEEL DOWNPIPE FOR FREEFLOW TO REAR SILE...

RC40-058

The popular RC-40 exhaust system was updated to the Millennium range in 2000. All retain the optimum size 1.75" tubing for maximum performance and efficiency, but we now offer a choice of tailpipe size and configuration. In addition, they now have st...

($50.15) £50.15 exc vat

($60.18) £60.18 inc vat

RC40 REAR BOX MILD STEEL SIDE EXIT LARGE BORE

RC40-010

The popular RC-40 exhaust system has been updated and called the millennium range from the year 2000. All retain the optimum size and configuration. In addition, they now have stainless steel pipes for better appearance and rust resistance. And for t...

($99.02) £99.02 exc vat

($118.82) £118.82 inc vat

BLANKING PLUG FOR LAMBDA SENSOR HOLE

MYB100040

Blanking plug to blank of the Lambda sensor hole on all SPI/MPI models.

($2.63) £2.63 exc vat

($3.16) £3.16 inc vat

CATALYST M10 BOLT METRIC FOR CAT FLANGE

FB110351

M10 metric flanged bolt 35mm long for catalytic converter. (4 required per unit)

($1.22) £1.22 exc vat

($1.46) £1.46 inc vat

MANIFOLD LCB EXHAUST STAGE 2 WITH SPECIAL CENTRE B...

C-AEG376

Standard bore road LCB (1-3/4"id) that has an enlarged and reshaped middle pipe which creates a type of vortex, simulating a pulsing effect similar to the outside two pipes,thus producing an improved BHP,Torque and power curve.Ideal for very hot smal...

($118.54) £118.54 exc vat

($142.25) £142.25 inc vat

CATALYTIC CONVERTER NUT M10 METRIC

NV110051

THE M10 METRIC NUT THAT SCREWS ON THE THREAD BOLTS OF THE CATALYLITIC CONVERTER

($0.61) £0.61 exc vat

($0.73) £0.73 inc vat

EXHAUST MIDDLE MOUNTING

GEX7081

Middle exhaust mounting, bolts on to the front of the rear subframe and is the central or first of the rubber mountings. see GEX7081POLY for Poly type or if you are fed up with breakages see C-19G3257.The original Genuine pa...

($1.60) £1.60 exc vat

($1.92) £1.92 inc vat

MANIFOLD LCB SMALL BORE EXHAUST (LM2)

C-STR817

Small bore Maniflow LCB. Has a 1.5" outer diameter 1.375" internal diameter bore size. STD mini exhaust and downpipe size is 1.250".

If the 1.375" tapered end of about 2" is removed a 1.750 pipe will fit over remaining length of outlet pipe.

($117.72) £117.72 exc vat

($141.26) £141.26 inc vat

EXHAUST HANGER BRACKET ON REAR OF REAR SUBFRAME

C-ARA671

This is a bolt on conversion bracket to fit on the rear of the rear subframe to take the later type rubber strap mounted exhaust systems.Later subframes 1991 on had these parts welded in position.

($12.96) £12.96 exc vat

($15.55) £15.55 inc vat