MANIFOLD LCB SMALL BORE EXHAUST (LM2)
C-STR817

£117.72 exc vat

£141.26 inc vat

In stockIn stock
Small bore Maniflow LCB. Has a 1.5" outer diameter 1.375" internal diameter bore size. STD mini exhaust and downpipe size is 1.250".

If the 1.375" tapered end of about 2" is removed a 1.750 pipe will fit over remaining length of outlet pipe.

£117.72 exc vat

£141.26 inc vat

In stockIn stock

Recommended usage 1 x C-STR817 to fit one mini.
Inlet & Exhaust Manifolds - Qty 1

People also bought products
Y PIECE FOR SMALL BORE LCB to customer order only
C-AHT194

"Y" Piece for small bore Maniflow LCB C-STR817

£49.50 exc vat

£59.40 inc vat
MANIFOLD CLAMP 1.75" COOPER FREEFLOW WITH TAG FLAT...
C-AHT98

This is the clamp on the cooper freeflow manifold to clamp it to the engine for extra support, supplied with tag.

£4.95 exc vat

£5.94 inc vat
MANIFOLD STD BORE MILLENNIUM LCB WITH CAST FLANGES
C-AEG364

Standard bore Budget priced LCB (1-3/4"id) with pre cast flanges to improve flow and save engine tuners time matching the ports. This is ideal for very hot small bore engines and for standard to high performance 1275s, including road 1380s.

£64.50 exc vat

£77.40 inc vat
MANIFOLD GASKET FOR FUEL INJECTED CARS
GUG704053MG

Special reinforced gasket for injection cars has metal inserts on exhaust ports plus a metal back on the manifold side which makes surface easier to clean when replacing. Often used on Turbo cars when correct gasket is in short supply.


...

£5.10 exc vat

£6.12 inc vat
INJECTION LCB MANIFOLD WHEN DELETING CAT
C-AEG374

LONG CENTRE BRANCH EXHAUST MANIFOLD FOR FUEL INJECTED CARS WITH A SENSOR TAKE OFF in main LCB body, THIS IS FOR USE WHEN THE CATALYST IS BEING REMOVED AND A RC40 EXHAUST IS BEING FITTED. If the catalyst is to be retained use [link]C-AEG3...

£99.91 exc vat

£119.89 inc vat
MANIFLOW DOWNPIPES WHEN HIF CARB FITTED
C-AEG367

Downpipe to fit the original exhaust manifold on the late (from 1990) Mini Cooper and MG Metros when using HIF6/44 carburettors. Y piece outlet end is 1.875" outside diameter, 1.75" inside diameter.Without sensor hole

This allows you to dele...

£69.54 exc vat

£83.45 inc vat
MANIFLOW COOPER FREEFLOW EXHAUST MANIFOLD
C-STR816

Maniflow's tubular reproduction of the original Cooper 997/998cc exhaust manifold manufactured out of the same tubing as the STD bore LCB. This free flow manifold works vey well at lower speed pick up, the LCB is noisier but better at the top end of ...

£87.45 exc vat

£104.94 inc vat
GASKET EXHAUST DOWNPIPE INJECTION
GEX7779

Special tin plate type of gasket that goes between the manifold and exhaust downpipes on all injection cars.

£1.68 exc vat

£2.02 inc vat
MANIFOLD NUT STAINLESS STEEL MULTIPOINT
GHF261S

Smarten up your engine bay with these stainless steel nuts which are not only stronger and resistant to rust but the multi point nut heads are easier for access. See also kit C-STR287.

£5.25 exc vat

£6.30 inc vat
WASHER FOR MANIFOLD THICK TYPE
12A1211

The intake/exhaust manifold should be secured to the head with brass nuts and these very thick washers. These washers are intended to not only spread the clamping action but the thickness allows them to absorb the heat without deforming! Takes 4 per ...

£0.34 exc vat

£0.41 inc vat
MANIFLOW LCB ADAPTOR FOR FREEFLOW MANIFOLD
L71

This short pipe fits on the end of our freeflow manifols C-STR816 to give the overall length of an LCB when you have an exhaust system to fit that was made explicitly for LCB fitment.Total length is 300mm ID is 44mm OD is 48mm.

£6.66 exc vat

£7.99 inc vat
MANIFOLD CLAMP 1.5" LCB TO ENGINE FLAT TYPE
C-AHT94

This is the clamp for the C-AEG365 manifold that clamps it to the engine for extra support.

£4.80 exc vat

£5.76 inc vat
MANIFOLD GASKET INLET / EXHAUST
AJM601

Manifold gasket fitted to all A series pre 1992 except Turbo which had a reinforced exhaust ports GUG704063MG and SPI from 199. From 1991 on a new better gasket with reinforced exhaust ports and backing was fitted GUG704053MG

£0.96 exc vat

£1.15 inc vat
THERMO-TECH EXHAUST WRAP
GS5630

1 inch X 50 feet / 25mm x 15metres

For Race Use only!

£43.50 exc vat

£52.20 inc vat
MANIFOLD LINK PIPE WITH KNUCKLE FROM LCB TO CATALY...
C-AEG375

Link pipe for fitting between the LCB and the catalyst. It has a stainless steel knuckle joint to prolong life and give the flexibility required on the system to overcome damage. See also alternative RC40-016

Y piece replacemen...

£45.83 exc vat

£55.00 inc vat
INJECTION MANIFOLD DOWNPIPE STUD
TD108051A

Special length and thread pattern only for the exhaust manifold to downpipe of injection cars, see also FX108047 special nuts. Metric M8.

£2.56 exc vat

£3.07 inc vat
DOWNPIPES AND LINK PIPE FOR INJECTION CARS
C-AEG371

Downpipes to fit onto the original exhaust manifold when retaining the catalyst on fuel injected late Coopers. Manual cars only

£121.70 exc vat

£146.04 inc vat
MANIFOLD NUT/WASHER. 1990 on
LYH10008

The newest development in the A-series engine is the use of these nuts with swedged-on washers. The washer will not separate from the nut, so you won't lose it. Yet the nut rotates independently while you tighten it. What a great idea.

£3.68 exc vat

£4.42 inc vat
MANIFOLD STUD 6MM LONGER THAN 53K487 APPROX 1990 O...
LYR10028

Manifold stud for all A series injection engines and some late carburettor cars which is 45mm long-6mm longer than 53K487.carburettor engines usually retained the 53K487 shorter screw for the outside 2 holes.

Sold singly,6 per c...

£0.75 exc vat

£0.90 inc vat
MANIFOLD NUT SHORT BRASS 5/16" UNF
GFK3436

Standard brass manifold nut. You will probably want a mix of these and the longer 51K1177 to secure your intake/exhaust manifold. This nut 5/16" long whereas 51K1177 is 1"long.

£0.45 exc vat

£0.54 inc vat