ROCKER COVER T BARS WITH CHROME FITTINGS
SAC71C

($14.06) £14.06 exc vat

($16.87) £16.87 inc vat

In stockIn stock
Originally marketed by Minispares in the mid 70s so many companies copied them because of their smart looks and ease of fitment. These have been improved by offsetting the arms to help tighten plus stop the arm falling out when they were straight. Kit includes 2 of T bars, plus British chrome made spacers and seal covers as a car set. but the rubber seals are not included see12A1358 or upgraded neoprene type 12A1358MS.

($14.06) £14.06 exc vat

($16.87) £16.87 inc vat

In stockIn stock

Recommended usage 1 x SAC71C to fit one mini.

Recommended products
ROCKER COVER RUBBER GROMMET
12A1358

No reason for an oil leak here. For the price, they should be replaced every time the rocker cover is off. Sold singly, 2 required per engine.

We have now sold all the original seals we cleared out from Rover so July 2017 retooled to make a ...

($0.42) £0.42 exc vat

($0.50) £0.50 inc vat
ROCKER COVER GROMMET NEOPRENE CONTENT FOR LONGEVIT...
12A1358MS

No reason for an oil leak, fit these special neoprene content seals for the hotter running engine. Much more expensive than the standard one which everybody makes, but at such a cheap price they are ordinary rubber. These are still cheaper than the R...

($0.55) £0.55 exc vat

($0.66) £0.66 inc vat
Kit contained products
ROCKER COVER CHROME WASHER FOR FITTINGS
GM040K

Dished shape chrome washer that completes the rocker cover fixing set and compliments GMK039K and GMK038P. See also SAC71L and SAC71C kits.

Originally Sold as Rover part number 12G679.

($1.32) £1.32 exc vat

($1.58) £1.58 inc vat
ROCKER COVER CHROME SPACER FOR FITTINGS 12G687
GM039K

Chrome washer to sit under the GMK038P chrome rocker bolt and on top of the rocker seal chrome cap GMK040K.

Also see kit SAC71C and SAC71L.

Originally sold by Rover as 12G687.

($1.66) £1.66 exc vat

($1.99) £1.99 inc vat
ROCKER COVER T BARS(PAIR)
SAC71

Originally marketed by minispares in the mid 70s so many companies copied them because of their smart looks and ease of fitment they were improved by offsetting the arms to help tighten plus stop the arm falling out when they were straight. These T b...

($6.75) £6.75 exc vat

($8.10) £8.10 inc vat
People also bought products
VALVE COTTER LARGE SINGLE GROOVE COMPETITION(1 UNI...
2A11EVO

New competition valve cotter for early heads with the large single groove valve, these are precision CNC machined from 4340 and heat treated to a better spec than EN24T and claimed to be stronger in fatigue life.

These locate better in the v...

($3.96) £3.96 exc vat

($4.75) £4.75 inc vat
VALVE SPRING SEATS SHIMS 0.020"(set of 4)
SS1

Spring seat shims (set of 4), 0.020" thick (0.5mm).

Spacer shims to increase valve seat pressure and overall spring rate.

These were also used on all the 8 port head valve seats to prtect the alloy seats from wear. (8 port now C-AHT...

($6.90) £6.90 exc vat

($8.28) £8.28 inc vat
ROCKER ADJUSTING NUT EN24T
C-AHT450

Mini Spares genuine upgraded part. Hexagon head rocker screw nut in EN24T.

Also available is a flanged nut C-AHT449

($2.64) £2.64 exc vat

($3.17) £3.17 inc vat
CYLINDER HEAD HEATER TAP FITTING KIT
ADU9102FK

Fitting kit comprising of studs, nuts, plain washers, spring washers and a gasket

($1.60) £1.60 exc vat

($1.92) £1.92 inc vat
HEAD STUD AND NUT KIT WITH A+ FLANGED NUTS
C-AHT279A

This kit of head studs is the best available for road and lightly tuned engines. See the C-AHT280 set for highly tuned engines.

The material spec is alloy steel heat treated to 75 tensile tons per square foot minimum and finish...

($51.92) £51.92 exc vat

($62.30) £62.30 inc vat
ARP 11 STUD HEAD SET
C-AHT283

ARP Head stud kit that compromises of;

4 x Long Head Studs

7 x Short Head Studs (Disregard 2 if you're using a 9 stud application)

11 x Multipoint ARP nuts

11 x Heavy Duty Washers

4 x Rocker post studs <...

($142.50) £142.50 exc vat

($171.00) £171.00 inc vat
VALVE COTTER SINGLE GROOVE COMPETITION (1 UNIT=2 H...
88G459EVO

New competition valve cotter, these are precision CNC machined from 4340 and heat treated to a better spec than EN24T and claimed to be stronger in fatigue life.

These locate better in the valves and easier to control spring heights.

($3.96) £3.96 exc vat

($4.75) £4.75 inc vat
ROCKER COVER BLUE MINISPARES WITH GFE6003 CAP
ROCKERCVR03

Unlike polished covers, these powder coated aluminum valve covers don't get that dingy look; simply wipe them and they're clean. (Fins and Mini Spares logo remain cast aluminum finish) And they're made to clear our hi-lift rockers. Available in ...

($36.42) £36.42 exc vat

($43.70) £43.70 inc vat
TOP CAP TITANIUM RACE SET(8) FOR C-AEA526/7
C-AEA530

Set of strong lightweight titanium top caps to suit our valve springs C-AEA526/527 hard for single collet competition valves. Sold as a set of 8.

($80.00) £80.00 exc vat

($96.00) £96.00 inc vat
CYLINDER HEAD HEATER TAKE OFF OUTLET ALLOY 5/8"
12G2534ALLOY

Alloy CNC version of the cylinder head take off 12G2534. The standard item being steel can be prone to corrosion, this CNC alloy version is smart, and will not corrode like steel does

($22.32) £22.32 exc vat

($26.78) £26.78 inc vat
CYLINDER HEAD ANCILLARY STUD AND NUT KIT PRE 1990
MSSK061

Complete stud, nut and washer kit for the cylinder head ancillaries. Kit contains parts to retain the following:

Inlet/Exhaust manifold to head, studs/nuts/washers

Thermostat housing (no sandwich plate) studs/nuts/washers

H...

($14.00) £14.00 exc vat

($16.80) £16.80 inc vat
MANIFOLD STAINLESS STEEL STUD AND NUT KIT
C-STR282

Minispares own stainless steel manifold stud and 6 sided hexagon nut kit.

For mutipopint nut kit see C-STR287

Quantity required one kit per car

($21.41) £21.41 exc vat

($25.69) £25.69 inc vat
THERMOSTAT HOUSING STAINLESS STEEL STUD AND NUT KI...
C-STR281

Minispares own stainless steel Thermostat housing stud kit for the single tier type thermostat housing.Quantity required one kit per car

($11.00) £11.00 exc vat

($13.20) £13.20 inc vat
THERMOSTAT HOUSING FITTING KIT (SINGLE TIER TYPE)
12G103FK

This thermostat housing fitting kit, suitable for all single tier thermostat housings. Comes with new studs, nuts, washers and Klinger thermostat housing gasket

($3.35) £3.35 exc vat

($4.02) £4.02 inc vat
OIL FILLER CAP RED LATE CARS/METRO
GFE6007

Originally fitted to Minifin rocker covers as standard Rover equipment, it will also fit almost every other rocker cover including our FP26 range and Minispares alloy covers. This improved cap has a large grip and an improved lock system...

($6.80) £6.80 exc vat

($8.16) £8.16 inc vat
THERMOSTAT HOUSING GASKET LATEST TYPE
GUG705558GM

Genuine version of the thermostat gasket for all A series. Black one side and red the other they are fitted black side to the head. Green to the thermostat.

We have no evidence as yet that they last longer but do look good.

See [lin...

($1.18) £1.18 exc vat

($1.42) £1.42 inc vat
ROCKER POST SPACER SINGLE PLATE
2A515

Spacers for under the rocker pedestals are used mainly by engine tuners to allow tappet adjustment to be made where cylinder head mods have been carried out. 1.3mm/0.0512" thick, this can be used to hold locating screw on rocker post assembly but the...

($2.37) £2.37 exc vat

($2.84) £2.84 inc vat
EXHAUST VALVE WITH LARGE COLLET GROOVE 850 998 110...
AEA434

Early Large cotter groove exhaust valve. Most small bore engines seem particularly prone to burning valves, it is highly recommended to replace the exhaust valves when you do a valve job! This 1.0" valve fits most early 948cc, 998cc and 1098cc engine...

($3.71) £3.71 exc vat

($4.45) £4.45 inc vat
STUD HS4/HIF CARB + some 12G103 HOUSING (5/16")
CHS2514

Universal stud made for fitting the HS4/HIF carb to the manifold (except HS6 with alloy spacer on cast one piece manifold which requires CHS2515 (5.8mm longer)) and it also fits the cylinder head to take the thermostat housi...

($0.78) £0.78 exc vat

($0.94) £0.94 inc vat
STAINLESS STEEL HEATER TAP STUD SET
C-STR285

replacements in stainless steel for the heater tap elbow on the cylinder head.

Quantity required one kit per car

($4.00) £4.00 exc vat

($4.80) £4.80 inc vat