CENTRE CAP FOR MAMBA WHEEL 2010 ONWARDS

Centre cap for 2010 onwards mamba alloys. Fits 70mm hole.

($3.72) £3.72 exc vat

($4.46) £4.46 inc vat

CHROME WHEEL NUT FOR ROVER COOPER/SPORTSPACK WHEEL...

Solid version of NAM9075 chrome plated without the troublesome stainless steel cover that gets destroyed by air tools and 12 point sockets. This uses 17mm socket.

($0.97) £0.97 exc vat

($1.16) £1.16 inc vat

WHEEL NUT AND WASHER REVOLUTION AND ORIGINAL MAMBA...

REV09C

Chrome wheel nut for all original Mamba and Revolution wheels except 13".

Overall length is 48mm

Sleeve length is 32mm

Sleeve diameter is 13.8mm

The washer is 2.3mm thick and outside diameter is 24mm

($1.80) £1.80 exc vat

($2.16) £2.16 inc vat

WHEEL NUT STAINLESS FOR MINISPARES WHEEL INCLUDES ...

C-21A1969

Stainless steel sleeve nut with tapered washer.

5/8" SHANK DIAMETER and 16mm long shaft. Sold individually as fitted to our Special Tuning wheel range where applicable.

The best reason for buying our wheels is that spare ...

($5.16) £5.16 exc vat

($6.19) £6.19 inc vat

WHEEL NUT PRE 60° ANGLE 10" STEEL WHEEL (ROUNDED)

88G322

The original mini wheel nut with a round seating was fitted from 1959 until 1984 when they changed to a 60 Degree straight seating wall. This later nut was 113087. 10" wheels with plastic hub caps used a strange looking nut to hold the c...

($0.62) £0.62 exc vat

($0.74) £0.74 inc vat

WHEEL NUT NO5 LARGE SEAT CHROME 60° TAPER 1984 on

CN5

If your wheels are using a tapered seat style wheel nut you must consider this latest safety option! The original stock nut has a very small area of contact to absorb all the loads of cornering, etc. Our special "wide seat" nuts almost double the con...

($1.55) £1.55 exc vat

($1.86) £1.86 inc vat

WHEEL SPACER RING PAIR 5mm

SR4

Many aftermarket wheels, when combined with wide tyres, will require the use of spacers to avoid tyre rub. Spacers are sold by the pair, these come without studs because they're so skinny the original studs should work. 3/16" PER WHEEL.

($9.85) £9.85 exc vat

($11.82) £11.82 inc vat

WHEEL BOLT SPARE FOR BG4001 KIT SOLD EACH

BG4001BOLT

these are the special spacer type bolt that are in the BG4001 kit. they screw on the original stud to give the extension

($2.56) £2.56 exc vat

($3.07) £3.07 inc vat

WHEEL STUD (78mm) EXTRA LONG (3.1250")

ENJO-1040

Longest one piece stud available, 78mm long with 27mm thread. Can be used on later wider brake drum but with 3/4"(19mm)spacers only. Available as a kit as CW17. The shank length from under the bolt head is 78mm with 30mm thread.

($1.80) £1.80 exc vat

($2.16) £2.16 inc vat

WHEEL STUD (55mm) COOPER S AND ALL 1984 ON REAR

21A1278

This is the correct length for all minis using the rear spacered type drum which was fitted to all Cooper "S" 1275GT and every mini from 1984 to 1996 except the ERA Turbo and Sportspac cars which had 13" wheels. Stud shank length from under head of b...

($0.96) £0.96 exc vat

($1.15) £1.15 inc vat

WHEEL STUD (50mm) 1/2" LONGER THAN 21A2064

21A2064L

50mm shank length from under head of stud with 26mm long thread. Used in many spacer kits (our CW1).

($1.31) £1.31 exc vat

($1.57) £1.57 inc vat

WHEEL STUD (35mm) STANDARD LENGTH 10" WHEELS AND P...

21A2064

For the front and rear of all early cars up to 1984 and except those with spacered rear drums fitted which took the longer rear stud 21A1278.

This popular stud has found its way on any year mini and lengths being the only deciding factor. Th...

($1.01) £1.01 exc vat

($1.21) £1.21 inc vat

WHEEL NUT FOR ROVER COOPER WHEEL LESS S/STEEL COVE...

AJM1139

Often used by by racers because it has a true 11/16" hex head whereas the later

type NAM9075 has a s/steel cover making it an odd size which is why they often get damaged. You must use a 6 sided socket and not a multi sided 11/...

($2.10) £2.10 exc vat

($2.52) £2.52 inc vat

CENTRE CAP FOR MAMBA WHEEL 2010 ONWARDS

WHL1014

Centre cap for 2010 onwards mamba alloys. Fits 70mm hole.

($3.72) £3.72 exc vat

($4.46) £4.46 inc vat

WHEEL STUD (58mm) AS IN CW16 KIT SAME LENGTH AS SP...

ENJO-1039

This is the same length as the Sportspac 6x13 rear wheel stud but has less corser splines for fitting semi worn holes. 58mm long shank from under bolt head with 19mm thread. Next size up is ENJO-1040 at 78mm long. This bolt is used in bo...

($1.23) £1.23 exc vat

($1.48) £1.48 inc vat

NANKANG 165/60/12 GREEN SPORT ECO PLUS

TYRE36

Nankang Green Sport Eco Plus, 165/60/12.

EU label information

Rolling resistance F

Wet Grip B

Esternal Noise (dB) 70

($43.50) £43.50 exc vat

($52.20) £52.20 inc vat

NANKANG AR-1 TYRE 165/60/12

TYRE33

The AR-1 is a faster, more refined track tyre, aimed at the track enthusiast who is hunting lap times.

With only one compound option and with all tyres being produced with 5.5mm tread depth, the AR-1 is positioning itself in amongst the gre...

($90.64) £90.64 exc vat

($108.77) £108.77 inc vat

NANKANG AR-1 TYRE 175/50/13

TYRE31

The AR-1 is a faster, more refined track tyre, aimed at the track enthusiast who is hunting lap times.

With only one compound option and with all tyres being produced with 5.5mm tread depth, the AR-1 is positioning itself in amongst the gre...

($100.00) £100.00 exc vat

($120.00) £120.00 inc vat

GENUINE MINILITE 6x10" ALLOY WHEEL. DEEP DISH

C-21a1902A

Re introduced by the new Minilite company these are good quality wheels but do not look exactly like the originals from late 60s early 70s made by Tech Del,

Offset ET-15, SPECIAL 70mm backspace for Japan market originally.

This gi...

($108.38) £108.38 exc vat

($130.06) £130.06 inc vat

NANKANG SV-3 145/70/12 WINTER TYRE

TYRE27

A winter tyre for compact and middle-class vehicles: the triple v-shaped tread design of SV-3 tyres help with drainage and the zig zag pattern helps with grip on snow, the silica compound also aids grip on icy roads.

It is advisea...

($37.50) £37.50 exc vat

($45.00) £45.00 inc vat

MAMBA WHEEL 6X12 BLACK WITH SILVER RIM

WHL1015

The Mamba design goes way back to the sixties. The design is, in fact, so unique that you will only see Mambas on Minis! MAMBA logo on the centre cap. Includes special chrome sleeve nuts with a socket drive for fitting. Also see WHL1012...

($63.44) £63.44 exc vat

($76.13) £76.13 inc vat