| Label | Part No | Description | Quantity | Comments | |
|---|---|---|---|---|---|
| 1 | AUD3913 | HS4 Single carburettor 11/2” fixed needle | 1 | N.L.A | |
| 1 | FZX3003 | HS4 Single carburettor 11/2” swinging needle ABP | 1 | Pre waxstat jet | |
| 1 | FZX3013 | HS4 Single carburettors 11/2” swinging needle AAC | 1 | Waxstat jet | |
| 2 | AUC8103A | Dashpot damper | 1 | ||
| 3 | AUC4387 | Dashpot spring red, 4.5oz | 1 | ||
| 4 | AUD1267 | Fixed needle rich (MI) | 1 | 998cc auto | |
| 4 | AUD1034 | Fixed needle standard (AC) | 1 | 998cc auto | |
| 4 | AUD1076 | Fixed needle rich (BQ) | 1 | 1275cc | |
| 4 | AUD1528 | Fixed needle standard (DZ) | 1 | 1275cc | |
| 5 | CUD1015 | Swinging needle (AAR) Carb no. AUD453 | 1 | 1275cc | |
| 5 | CUD1025 | Swinging needle (ABB) FZX1047/AUD567 | 1 | 1275cc Europe | |
| 5 | CUD1037 | Swinging needle (ABP) Carb No AUD608 | 1 | 1098cc | |
| 5 | CUD1040 | Swinging needle (ABS) Carb No AUD611 | 1 | 848cc | |
| 5 | CUD1045 | Swinging needle (ABX) Carb No AUD679 | 1 | 998cc | |
| 5 | CUD1006 | Swinging needle (AAG) AUD540/AUD548 | 1 | 998cc Europe | |
| 5 | NZX4005 | Swinging needle (ADE) FZX1064/FZX1146 | 1 | 998cc Europe | |
| 5 | NZX4006 | Swinging needle (ADF) Carb No FZX1094 | 1 | 998cc | |
| 5 | NZX4008 | Swinging needle (ADH) FZX1142/FZX1064 | 1 | 850cc wax stat | |
| 5 | CUD1002 | Swinging needle (AAC) Carb No FZX1415 | 1 | 998cc wax stat | |
| 6 | AUD3306 | Swinging needle spring | 1 | ||
| 7 | AUD4288 | Swinging needle guide | 1 | Special order | |
| 8 | WZX1341 | Jet bearing kit, fixed needle only | 1 | ||
| 8 | WZX1442 | Jet bearing kit, was WZX1340 (swinging needle) | 1 | ||
| 9 | WZX1177 | Throttle spindle | 1 | ||
| 10 | WZX1323 | Butterfly disc, with screws | 1 | ||
| 10 | WZX1324 | Butterfly disc, anti-stall with screws | 1 | ||
| 10 | WZX1325 | Butterfly disc with air valve type, with screws | 1 | ||
| 11 | AUC1358 | Butterfly screw, was RTC5965 | 2 | ||
| 12 | AUD9451A | Jet (red plastic) black identification band, to Oct 1975 | 1 | ||
| 12 | LZX1111A | Wax stat jet (blue identification band, metal base) 1976 on | 1 | Supplied with jet | |
| 13 | AUD2193 | Washer | 1 | Supplied with jet assembly | |
| 14 | AUD2194 | Rubber seal | 1 | Supplied with jet assembly | |
| 15 | AUD2129 | Nut | 1 | Supplied with jet assembly | |
| 16 | WZX1300 | Float and gasket | 1 | ||
| 17 | AUC1152 | Float pin | 1 | ||
| 18 | CA90 | Flow jet needle and seat | 1 | Upgrade | |
| 18 | WZX1100A | Needle valve and seat | 1 | ||
| 19 | AUE266 | Lid assembly with float and needle valve | 1 | ||
| 20 | AUC8459 | Float gasket | 1 | ||
| 21 | AUD2071 | Adaptor piece die cast solid not rubber | 1 | Special order | |
| 22 | WZX1335 | Return spring kit | 1 | Special order | |
| 23 | JZX1394 | Dashpot and floatlid screw | 3 | ||
| 24 | AUD3080 | Spindle repair bush .3125” I/D ream body to 9.5mm | 2 | Part of full rebuild kits. | |
| 25 | AUC1310 | Float bowl chamber | 1 | Special order | |
| 26 | WZX1852 | Service kit, needle valve, jet and gaskets | 1 | Pre waxstat | |
| 26 | CSK65 | Service kit, needle valve, jet and gaskets | 1 | Waxstat - 1976 on | |
| 27 | CRK219 | Rebuild kit, with full spindle/disc repair also | 1 | Pre waxstat, plain disc | |
| 27 | CRK227 | Rebuild kit, with full spindle/disc repair also | 1 | Pre waxstat, over run disc | |
| 27 | CRK121 | Rebuild kit, with full spindle/disc repair also | 1 | Waxstat - 1976 on |
Standard cam with Mini Spares inlet and freeflow exhaust manifolds,K&N filter 1275cc use carb needle AAM(CUD1011) 1275cc with Large bore RC40 try carb needle AAA(CUD1000) 998cc use carb needle AAU(CUD1018)
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.