FUEL GAUGE IN MAGNOLIA BF6108-04
13H2133MG

£45.36 exc vat

£54.43 inc vat

In stockIn stock
In 1964 the fuel gauge system was changed on the Mini (pre"64 cars did not have a voltage stabilizer). It is necessary to match the gauge with the tank sending unit and the supply voltage…if your readings are way off…always full or empty or max 1/2 f...

£45.36 exc vat

£54.43 inc vat

In stockIn stock

Recommended usage 1 x 13H2133MG to fit one mini.
Speedos, Gauges, & Cables - Qty 1

People also bought products

Sealing washer for the oil gauge to oil pipe as sold in OL kit and for 21A804 metal pipe to oil gauge.

With this large diameter line to the oil pressure guage you can actually see minor fluctuations in the pressure at idle or when the relief valve bounces open and closed. Because the braided steel line is one piece from the block to the gauge there is...

We sell about 20 of these per year and many are used on similar models to those indicated-Main and dash loom only--No side wing indicators-indicator stalk on right-alternator-rear lamps with reverse lights-steering lock-inertia starter-centre speedo ...

Angled oil pipe adaptor for fitting in confined spaces to eradicate damage of oil pipe, requires an OA adaptor if being used with a oil pressure gauge/t-piece.

Oil pipe in plastic 5 feet long, if fitting to a Tim gauge you will require LMA017 adaptor for the gauge.

Not comppatable with the CAM6431 standard oli pressure block union, and OA shoudl be purchased to fit.

Oil gauge adaptor for fitting into engine block or T piece.

A must if you want to run a mechanical oil gauge and retain the oil warning switch. Screws straight into the block on all A series engines.

Mini Moke Speedo Cable for the Centre clock type speedo,also 13" longer to allow the Smiths type central speedo to be moved.

If you have an early Mini saloon or Estate/Van or Pickup with the fuel tank sending unit held in by screws, this is the correct screw for you.

Do not forget the special copper washers also 2A2088 and the cork gasket [link]2H10...

Oil pressure is the "blood pressure" of your engine! Know how it is doing and you know how your engine is doing. This Smith's gauge is the standard 2" diameter with chrome bezel. With a magnolia face. Mechanical.

Does not come with pipewor...

In 1964 the fuel gauge system was changed on the Mini (pre" 64 cars did not have a voltage stabilizer). It is necessary to match the gauge with the tank sending unit and the supply voltage…if your readings are way off…always full or empty or max 1/2 ...

Extra long cable for Smiths central located speedo when position moved in dash and also used as a Tacho cable for Sprite, 36" long.

48" extra long speedo cable for special fitmentswhen using original type Smiths central mounted speedo.

Electric water gauge as standard on the centre binnacle Mini. Marked "C-N-H" Genuine Smiths. With a magnolia face.



Does not come with bulb holder or bulb.

This is the oblong metal box attached to the rear of your round centre speed heads to stabilize voltage to the fuel gauge. For Centre clock Speedo only!

made for negative earth only--BR1310

Magnolia face. The 200 kilometres per hour Mini Cooper S speedometer is great for those who live in Metric countries or those in the U.S. who want to scare off their friends! Includes fuel gauge, voltage stabilizer and indicator lamps.

The black plastic pod which mounts the speedo and two gauges in the original central position. In the 1970's and 1980's a great number of Mini owners caught the customizing bug and a lot of Minis had custom dashboards installed. Now we're going the o...

Screw type bulbs that fit the plugs (AEU1313A) on the round central clock speedos on all minis from 1959 until the introduction of the non Smiths type plastic clocks as used on the first clubmans and 1275GT. Sold individually.

Magnolia face. This replica of the Cooper S Speedo is marked to 130 MPH. Geared for 3.44 final drive. Includes voltage stabilizer and fuel gauge.