WATER TEMPERATURE GAUGE MAGNOLIA FACE
13H4460MG

£45.63 exc vat

£54.76 inc vat

In stockIn stock
Electric water gauge as standard on the centre binnacle Mini. Marked "C-N-H" Genuine Smiths. With a magnolia face.



Does not come with bulb holder or bulb.

£45.63 exc vat

£54.76 inc vat

In stockIn stock

Recommended usage 1 x 13H4460MG to fit one mini.
Speedos, Gauges, & Cables - Qty 1

Recommended products

2.2 WATTS and fits back of gauges in cars with 3 extra 52mm round clocks.

This is the bulb holder for the original Smiths auxillary gauges fitted to 3 clock centre dashboards i.e 13H4459 and 13H4460, will also fit the aftermarket Smiths gauges (SIB part numbers).

Alternative products

Electric water gauge as standard on the centre binnacle Mini. Marked "C-N-H" Genuine Smiths. For post 1964 vehicles with voltage stabiliser fitted on speedo.

The early type had 3 connector tabs on one long brass strip for wires where as thi...

Kit products

Complete binnacle set for centre speedo cars, kit includes 130 mph magnolia speedo, temperature gauge, oil pressure gauge, binnacle and chrome surround (incl clips). Mini Spares also have a short loom which converts 3 clock Nippon

Seiko gaug...

Complete binnacle set for centre speedo cars, kit includes 200 kph magnolia speedo, temperature gauge, oil pressure gauge, binnacle and chrome surround (incl clips).Mini Spares also have a short loom which converts 3 clock Nippon

Seiko gauge...

People also bought products

Male to female brass spacer/adapter for mechanical water temp guage screws into head & accepts capillary tube. Required for SIB422 and SIB422MG. Also fits in MOCOT1

Electric water gauge as standard on the centre binnacle Mini. Marked "C-N-H" Genuine Smiths. For post 1964 vehicles with voltage stabiliser fitted on speedo.

The early type had 3 connector tabs on one long brass strip for wires where as thi...

Combined water temprature and oil pressure gauge.



Water temprature includes capillary tube and adaptor to fit into the cylinder head, Oil pressure gauge doesn't include the capillary fittings. White face version avaiable as [link]...

0-110 centigrade scale with 6 foot capillary mechanical fittings, requires an adaptor TE5 in order to fit the cylinder head.

Electrically operated gauge with 40-120 centigrade reading for negative earth cars only. Comes complete with sensor and relevant adaptors to fit the cylinder head.

Magnolia face 0-110 centigrade scale with 6 foot capillary tube mechanical fittings, requires TE5 adaptor to fit cylinder head.

You will require a HPS8 union for the sump plug hole if you are fitting this to the gearbox. If fitting to MOCOT2 you will require TE5 See SIB420MG also.

A sensible edition to any tuned min...

oil temperature gauge in magnolia.

If fitting MOCOT2 you will need TE5 adaptor.

Although the twin point minis had this type of gauge it worked electronically

which is not very accurate for performance engines. This one howe...

A union to fit the sump plug hole to accept Smiths oil temperature gauges, but will only take the small capillary type bulb as used on very early and current smiths oil temp gauges, does not fit the larger capillary fitted to some smiths gauges unles...

Combined water temperature and oil gauge in fahrenheit and 1-100lb oil pressure. This is a mechanical type(capillary fittings) with Smiths name on white face. Black face version avaiable as SIB130 Requires TE5 adaptor.

The Classic mini ashtray replacement digital clock has been designed to seamlessly replace the ashtray insert to ensure the integrity of your classic mini dashboard is maintained whilst introducing the modern technology of our digital clock and optio...

Smiths Electric oil pressure gauge in Magnolia.



Sender PTR1810-1-10 required.

KM/H version of DASH0100MAG. If you have a 3 clock instrument panel from 1988 on (Nippon seiko stamped on them) it probably has black dials and these will convert your clock to the more fashionable magnolia white colour.

This unit fits directly on to the gearbox in place of the standard cable and produces a digital signal for use with any electronic speedometer requiring 12 or 5 volt square wave pulse such as our electronic speedo 13H4443. For pre 1980 s...

Brand new modern electronic version of the classic centre speedo, housed in a billet case with OLED display this unit fits as per original speedos. Features include:



*Trip and total miles

*Remote trip reset

*Driv...

Brand new modern electronic version of the classic centre speedo, housed in a billet case with OLED display this unit fits as per original speedos. Features include:



*Trip and total miles

*Remote trip reset

*Driv...

This is the bulb holder for the original Smiths auxillary gauges fitted to 3 clock centre dashboards i.e 13H4459 and 13H4460, will also fit the aftermarket Smiths gauges (SIB part numbers).

Smaller 52mm face and reading 0-80 x100-If you are serious about your driving then you want to understand how your engine is responding to your urges. Many types of tachs are available in the aftermarket but since we drive British it should say "Smi...

Sealing washer for the oil gauge to oil pipe as sold in OL kit and for 21A804 metal pipe to oil gauge.

Complete binnacle set for centre speedo cars, kit includes 200 kph magnolia speedo, temperature gauge, oil pressure gauge, binnacle and chrome surround (incl clips).Mini Spares also have a short loom which converts 3 clock Nippon

Seiko gauge...