Hose clip for FAM2807 hose between oil pipes on central speed mini clusters

This is the original type of metal pipe that fitted from the engine to the

hose on cars with central speedo and gauges. The pipe that went from the rubber hose to the gauge was 21A804. The hose is FAM2807.

...

Oil pipe in plastic 5 feet long, if fitting to a Tim gauge you will require LMA017 adaptor for the gauge.

Not comppatable with the CAM6431 standard oli pressure block union, and OA shoudl be purchased to fit.

A kit to convert the early style cartridge oil filter to the later style spin on filter.

Victor Reinz/Mahle small bore head gasket for A-series engines.



Gasket fitment. Writing side up.

Fitting kit comprising of studs, nuts, plain washers, spring washers and a gasket

You should replace the camshaft bearings every time the block goes to the machine shop. These bearings fit all late model 1275cc blocks (the ones without tappet covers on the back) It's almost too simple and thus often overlooked during a rebuild. Ca...

ARP Head stud kit that compromises of;

4 x Long Head Studs

7 x Short Head Studs (Disregard 2 if you're using a 9 stud application)

11 x Multipoint ARP nuts

11 x Heavy Duty Washers

4 x Rocker post studs <...

ACL Race Bearings



ACL Race series bearings are precision manufactured to a wall thickness of ±0.0040mm giving engine builders close control of vertical oil clearance.

What is the purpose of ACL Race series bearings?
...

For our new drop gears where the front bush is held in by a circlip. Not for A Plus OR old straight cut type (this is NOT the top hat type rear bush).

19.85mm long- For use on the stepped type 1275cc type cranks this bush is fully floating a...

For modern day petrol, except 1275cc. See 37H8379MS for 1275cc.

After lengthy tests we have found nearly all vac units are not to the originals but with the change of added oxygenates to petrol in the 1980's and then ethanol in ...

Roller-tip rocker assembly. 1.5 Hi-Lift for 1275cc big bore engines only.

Craddle type with larger upgraded shaft size to improve rigidity.

Ensure tightening down all posts equally to eliminate stress fractures on shaft.

3 YEAR GUARANTEE-UK made. Large impeller higher capacity water pump with a high quality die cast body. A Mini Spares procured product as the original superb Rover Airtex tooling has been scrapped.

Fitted with a PPS, glass filled plastic impe...