£109.62 exc vat
£131.54 inc vat
In stock
£109.62 exc vat
£131.54 inc vat
In stockRecommended usage 1 x SIB130MG to fit one mini.
A must if you want to run a mechanical oil gauge and retain the oil warning switch. Screws straight into the block on all A series engines.
Oil pipe in plastic 5 feet long, if fitting to a Tim gauge you will require LMA017 adaptor for the gauge.
Not comppatable with the CAM6431 standard oli pressure block union, and OA shoudl be purchased to fit.
With this large diameter line to the oil pressure guage you can actually see minor fluctuations in the pressure at idle or when the relief valve bounces open and closed. Because the braided steel line is one piece from the block to the gauge there is...
Combined water temprature and oil pressure gauge.
Water temprature includes capillary tube and adaptor to fit into the cylinder head, Oil pressure gauge doesn't include the capillary fittings. White face version avaiable as [link]...
Electric water gauge as standard on the centre binnacle Mini. Marked "C-N-H" Genuine Smiths. With a magnolia face.
Does not come with bulb holder or bulb.
Electric water gauge as standard on the centre binnacle Mini. Marked "C-N-H" Genuine Smiths. For post 1964 vehicles with voltage stabiliser fitted on speedo.
The early type had 3 connector tabs on one long brass strip for wires where as thi...
Combined water temprature and oil pressure gauge.
Water temprature includes capillary tube and adaptor to fit into the cylinder head, Oil pressure gauge doesn't include the capillary fittings. White face version avaiable as [link]...
Mechanical movement with 57" long capillary tubing and has 40-120 degree centigrade calibration.
Recomended to use a TE5 adaptor.
0-110 centigrade scale with 6 foot capillary mechanical fittings, requires an adaptor TE5 in order to fit the cylinder head.
Electrically operated gauge with 40-120 centigrade reading for negative earth cars only. Comes complete with sensor and relevant adaptors to fit the cylinder head.
Magnolia face 0-110 centigrade scale with 6 foot capillary tube mechanical fittings, requires TE5 adaptor to fit cylinder head.
oil temperature gauge in magnolia.
If fitting MOCOT2 you will need TE5 adaptor.
Although the twin point minis had this type of gauge it worked electronically
which is not very accurate for performance engines. This one howe...
A union to fit the sump plug hole to accept Smiths oil temperature gauges, but will only take the small capillary type bulb as used on very early and current smiths oil temp gauges, does not fit the larger capillary fitted to some smiths gauges unles...
This is the temperature sender for the oil temperature gauge 1996 onwards(MPI, twin point)only. NOT automatic.
The original unit has now been discontinued from Xpart, but Mini Spares now offer a modification kit using a different ...
KM/H version of DASH0100MAG. If you have a 3 clock instrument panel from 1988 on (Nippon seiko stamped on them) it probably has black dials and these will convert your clock to the more fashionable magnolia white colour.
This unit fits directly on to the gearbox in place of the standard cable and produces a digital signal for use with an electronic speedometer requiring a 5 volt square wave pulse such as our electronic speedo 13H4443. For pre 1980 speedo...
Brand new modern electronic version of the classic centre speedo, housed in a billet case with OLED display this unit fits as per original speedos. Features include:
*Trip and total miles
*Remote trip reset
*Driv...
Brand new modern electronic version of the classic centre speedo, housed in a billet case with OLED display this unit fits as per original speedos. Features include:
*Trip and total miles
*Remote trip reset
*Driv...
Smaller 52mm face and reading 0-80 x100-If you are serious about your driving then you want to understand how your engine is responding to your urges. Many types of tachs are available in the aftermarket but since we drive British it should say "Smi...
0-30 psi electrical boost pressure gauge 52mm with Magnolia face. Also reads vacuum down to 15inHg. Requires an electrical pressure sender TURBO02.
Complete binnacle set for centre speedo cars, kit includes 200 kph magnolia speedo, temperature gauge, oil pressure gauge, binnacle and chrome surround (incl clips).Mini Spares also have a short loom which converts 3 clock Nippon
Seiko gauge...
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.