£35.10 exc vat
£42.12 inc vat
Out of stock
£35.10 exc vat
£42.12 inc vat
Out of stock
fits positivr or negative earth and 6 or 12 volt systems.0-60 grading for alternator use only
Kit comes with T piece and copper pipline and 1-100lb calibration.
Battery voltmeter gauge prewarns you of any electrical or charging defects or low battery condition.
mechanical movements and coloured segments indicating performance with 0-30ins/hg scale
0-110 centigrade scale with 6 foot capillary mechanical fittings, requires an adaptor TE5 in order to fit the cylinder head.
Mechanical movement with 57" long capillary tubing and has 40-120 degree centigrade calibration.
Recomended to use a TE5 adaptor.
Electric water gauge as standard on the centre binnacle Mini. Marked "C-N-H" Genuine Smiths. With a magnolia face.
Does not come with bulb holder or bulb.
Mechanical movement with 57" long capillary tubing and has 40-120 degree centigrade calibration.
Recomended to use a TE5 adaptor.
0-110 centigrade scale with 6 foot capillary mechanical fittings, requires an adaptor TE5 in order to fit the cylinder head.
Magnolia face 0-110 centigrade scale with 6 foot capillary tube mechanical fittings, requires TE5 adaptor to fit cylinder head.
A union to fit the sump plug hole to accept Smiths oil temperature gauges, but will only take the small capillary type bulb as used on very early and current smiths oil temp gauges, does not fit the larger capillary fitted to some smiths gauges unles...
Combined water temperature and oil gauge in fahrenheit and 1-100lb oil pressure. This is a mechanical type(capillary fittings) with Smiths name on white face. Black face version avaiable as SIB130 Requires TE5 adaptor.
Smaller 52mm face and reading 0-80 x100---If you are serious about your driving then you want to understand how your engine is responding to your urges. Many types of tachs are available in the aftermarket but since we drive British it should say "S...
With this large diameter line to the oil pressure guage you can actually see minor fluctuations in the pressure at idle or when the relief valve bounces open and closed. Because the braided steel line is one piece from the block to the gauge there is...
We sell about 20 of these per year and many are used on similar models to those indicated-Main and dash loom only--No side wing indicators-indicator stalk on right-alternator-rear lamps with reverse lights-steering lock-inertia starter-centre speedo ...
Angled oil pipe adaptor for fitting in confined spaces to eradicate damage of oil pipe, requires an OA adaptor if being used with a oil pressure gauge/t-piece.
Oil pipe in plastic 5 feet long, if fitting to a Tim gauge you will require LMA017 adaptor for the gauge.
Not comppatable with the CAM6431 standard oli pressure block union, and OA shoudl be purchased to fit.
A must if you want to run a mechanical oil gauge and retain the oil warning switch. Screws straight into the block on all A series engines.
Speedometer cable, 30" long for Smiths type central speedo-original was 26" long
Mini Moke Speedo Cable for the Centre clock type speedo,also 13" longer to allow the Smiths type central speedo to be moved.
You will need this union for your Tim gauge if you fit a replacement plastic oil pipe part number OL
In 1964 the fuel gauge system was changed on the Mini (pre" 64 cars did not have a voltage stabilizer). It is necessary to match the gauge with the tank sending unit and the supply voltage…if your readings are way off…always full or empty or max 1/2 ...
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.