£255.78 exc vat
£306.94 inc vat
In stock
£255.78 exc vat
£306.94 inc vat
In stockRecommended usage 1 x 13H4442 to fit one mini.
Standard replacement cable for central located Smiths Mini speedometer.
Electric water gauge as standard on the centre binnacle Mini. Marked "C-N-H" Genuine Smiths. For post 1964 vehicles with voltage stabiliser fitted on speedo.
The early type had 3 connector tabs on one long brass strip for wires where as thi...
Oil pressure is the "blood pressure" of your engine! Know how it is doing and you know how your engine is doing. This Smith's gauge is the standard 2" diameter with chrome bezel. Mechanical.
Does not come with pipework,bulb holder or bulb.
Magnolia face. This replica of the Cooper S Speedo is marked to 130 MPH. Geared for 3.44 final drive. Includes voltage stabilizer and fuel gauge.
Complete binnacle set for centre speedo cars, kit includes 130 mph black speedo, temperature gauge, oil pressure gauge, binnacle and chrome surround (incl clips). Mini Spares also have a short loom which converts 3 clock Nippon
Seiko gauge c...
Complete binnacle set for centre speedo cars, kit includes 130 mph black speedo, temperature gauge, oil pressure gauge, binnacle and chrome surround (incl clips). Mini Spares also have a short loom which converts 3 clock Nippon
Seiko gauge c...
This unit fits directly on to the gearbox in place of the standard cable and produces a digital signal for use with any electronic speedometer requiring 12 or 5 volt square wave pulse such as our electronic speedo 13H4443. For pre 1980 s...
2.2 WATTS and fits back of gauges in cars with 3 extra 52mm round clocks.
The 200 kilometres per hour Mini Cooper S speedometer is great for those who live in Metric countries or those who want to scare off their friends. Includes fuel gauge, voltage stabilizer and indicator lamps.
The black plastic pod which mounts the speedo and two gauges in the original central position. In the 1970's and 1980's a great number of Mini owners caught the customizing bug and a lot of Minis had custom dashboards installed. Now we're going the o...
This is the wiring short conversion loom that fits to the old central speedo and is used by people modifying from 2 or 3 clock dashes to single clock or just repairing damaged looms. With the correct bulb holders and spade fittings. Now uses 5x [link...
Magnolia face. This replica of the Cooper S Speedo is marked to 130 MPH. Geared for 3.44 final drive. Includes voltage stabilizer and fuel gauge.
Speedometer illumination lamps
These tiny light sockets snap into the back of the speedometer to light the way. If they won't stay in place check yours for spring tension or missing tangs.
Originally took screw in bulb [link]GLB987...
KM/H version of DASH0100MAG. If you have a 3 clock instrument panel from 1988 on (Nippon seiko stamped on them) it probably has black dials and these will convert your clock to the more fashionable magnolia white colour.
This is the bulb holder for the original Smiths auxillary gauges fitted to 3 clock centre dashboards i.e 13H4459 and 13H4460, will also fit the aftermarket Smiths gauges (SIB part numbers).
Smaller 52mm face and reading 0-80 x100---If you are serious about your driving then you want to understand how your engine is responding to your urges. Many types of tachs are available in the aftermarket but since we drive British it should say "S...
With this large diameter line to the oil pressure guage you can actually see minor fluctuations in the pressure at idle or when the relief valve bounces open and closed. Because the braided steel line is one piece from the block to the gauge there is...
Angled oil pipe adaptor for fitting in confined spaces to eradicate damage of oil pipe, requires an OA adaptor if being used with a oil pressure gauge/t-piece.
Oil pipe in plastic 5 feet long, if fitting to a Tim gauge you will require LMA017 adaptor for the gauge.
Not comppatable with the CAM6431 standard oli pressure block union, and OA shoudl be purchased to fit.
A must if you want to run a mechanical oil gauge and retain the oil warning switch. Screws straight into the block on all A series engines.
Speedometer cable, 30" long for Smiths type central speedo-original was 26" long
Mini Moke Speedo Cable for the Centre clock type speedo,also 13" longer to allow the Smiths type central speedo to be moved.
If you have an early Mini saloon or Estate/Van or Pickup with the fuel tank sending unit held in by screws, this is the correct screw for you.
Do not forget the special copper washers also 2A2088 and the cork gasket [link]2H10...
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.