BLANKING PLUG FOR REAR VALANCE FOG LAMP HOLE 19mm ...
14A7032

£0.90 exc vat

£1.08 inc vat

In stockIn stock
latest rear valances have holes drilled for left and right hand drive rear fog lamps so these are the plugs to fill the holes of the side you do not have the lamp

£0.90 exc vat

£1.08 inc vat

In stockIn stock

Recommended usage 1 x 14A7032 to fit one mini.

People also bought products

MkI aluminium boot lid "skin only" panel. This panel is produced off the original tooling, ensuring good panel fit and integrity. Following the pressing of the panel it is hand finished by Heritage craftsmen, to ensure the highest panel quality.

Non genuine repair panel for below the lights and above the rear valance, fits all models. Left hand side.

this r/h waist rail is alreday fitted to a new bodyside CZH430 .

It acts as a stifener on the inside of the bodyside just below the rear side window for strengthening between rear seat pan and B post

Non genuine body side skin from door back and below window line for the left hand side

genuine rear lower back panel for MK2/3 on, which goes up as far as lower edge of backlight seal ridge

Right hand panel behind wheel arch with subframe mounting holes and splash guard panel to stop debris being thrown into rear valance-but is also available with rear valance closing panel as ALA5528 R/H and ALA8623 for L/H

Non genuine rear valance closing panel L/H for saloon cars only,

similar to ALA8623 but less closing panel with 2 holes for mounting rear subframe and 14A6610 floor to wheel arch reinforcement.

Non Genuine metal battery box. always going rusty owing to the location of where it is fitted. Requires welding in place and preferably painted or a protective coat. Remember to check if the battery cover, strap and clips need changing. Popular afte...

Non genuine body side skin from door back and below window line for the right hand side

rear subframe mounting stiffener L/H repair bracket with holes for subframe mounting and attaches to wheel arch Fits on ALA8623

Genuine repair panel which is about 2.52 high from bumper mounting seam and

includes hinge holes and lower part of bootlid surround channel. Full width panel for any saloon.

Non genuine 11" long section repair panels equivalent to HMP441006 26" long genuine panel, the full length subframe mounting panel is HMP441008. This is the left hand side with castellated nut fittings for subframe

...

R/H convertion panel from MK2 to MK1. This panel is made to weld into the larger rear lamp hole of MK2 from 1968 to end of production saloon cars back to the original MK1 smaller lamp for either that Retro look or body repairs.

Rear subframe mounting stiffener panel R/H with holes for subframe mounting to wheel arch. Sits on ALA5524 or ALA5528

This lower rear valance is without any fog lamp or wiring holes and is also available as a genuine panel under part number 14A6940.

Non genuine 11"long section repair panels equivalent to HMP441006 26"long panel, the full length subframe mounting panel is HMP441008. This is the right hand side with castellated nut fittings for subframe

Although ...

Non genuine rear valance closing panel R/H for saloon cars only. Similar to ALA5528 but less panel with 2 holes for mounting rear subframe and 14A6609 floor to wheel arch reinforcement.

L/H conversion panel from MK2 to MK1. This panel is made to weld into the larger rear lamp hole of MK2 from 1968 to end of production saloon cars back to the original MK1 smaller lamp for either that Retro look or body repairs.

Genuine R/H rear quarter outer skin from the B post back for MK3 cars with wind up windows.From below the rear side window down, including the lip that the rear quarter light window seal sits on but does not include the inner stifener waist rail [lin...

non genuine boot hinge panel repair piece

this panel is just longer then the 3 central bumper holes and has the boot hinge holes plus the part of the body that the boot hinge seal sits on making this a perfect rust or accident repair panel. ...