CIRCLIP FOR GEARBOX DIFFERENTIAL OUTPUT SHAFT

22G2688

£2.94 exc vat

£3.53 inc vat

Out of stock

Circlip that fits on the gearbox output shaft in the differential for the pot joint type cars. Sold singly 2 required per gearbox.

£2.94 exc vat

£3.53 inc vat

Out of stock

Differential - Qty 2

Differential Assembly - Qty 2

People also bought products

LSD OUTPUT SHAFT RETAINING WASHER

C-BTA1243

Hardened flat washer to be used with flange type LSD Hardy Spicer C-BTA1262 outputs.

£2.24 exc vat

£2.69 inc vat

BRONZE THRUST WASHER FOR PLANET WHEEL PRE A+

2A7062

The bronze washer for the planet gears in the differential for pre A plus gearbxes. You can use the DAM5071 and cut the lips off.

£2.22 exc vat

£2.66 inc vat

DIFF COVER WHEN USING HARDY SPICERS "S" AND ROD CH...

22G420

These are the larger bore diff side covers when hardy spicers are fitted and they also have the flange to cover detent spring on side if fitted to rod change when converted to hardy spicer. Has a 50mm oil seal o/d and bush size 34.8mm.For the yoke o...

£52.50 exc vat

£63.00 inc vat

DIFF SIDE COVER PLATE BUSH "S" FOR 22G420

22G421

A bronze type bush that fits in the gearbox output shaft side cover on early automatics and Cooper S with hardy spicer type joints. These are larger than the standard mini or rod change engine gearbox types which take 2A3538.

£10.00 exc vat

£12.00 inc vat

PLANET GEAR IN DIFFERENTIAL

DAM6624

Planet gears for the differential are now manufactured by us as the genuine Rover product is obsolete. Beware of others on the market which must be checked before fitting as the overall dimensions in height seem to vary along with inferior/wrong mate...

£11.00 exc vat

£13.20 inc vat

CROWNWHEEL BOLT

ATA7043

This is an aftermarket high tensile shouldered bolt that engine and gearbox tuners are using, as the original shape head and high tensile type bolt is no longer available. For holding the crown wheel to the differential housing.

Sold individ...

£2.85 exc vat

£3.42 inc vat

CLUTCH PLATE KIT FOR MINISPARES EVOLUTION LSD

C-AHT584

REPLACEMENT CLUTCH PLATE PACK KIT FOR MINISPARES EVOLUTION LIMITED SLIP DIFFERENTIAL

£76.80 exc vat

£92.16 inc vat

THRUST WASHER FOR PLANET GEAR WITH LIP A PLUS

DAM5071

The latest model Mini differential still use thrust washers on the spider gears but now have a tab on one end to prevent them from rotating on the cage side of the diff. The cage of course is cast while the gear itself is much harder and thus the wh...

£2.70 exc vat

£3.24 inc vat

DIFF SIDE COVER NO LUG FOR L/H ROD CHANGE

CHM85

Fits all minis except Autos and those with hardy spicer joints, has no lug on as required for rod change L/H side. Sold singly.

The Mini transmission output side cover is notorious for leaking oil, but replacing the seal doesn't help for lon...

£54.00 exc vat

£64.80 inc vat

DIFF CAGE AND CROWNWHEEL BUSH

ATA7378

Bronze type bush is in the centre of all crownwheels in the gearbox plus another one is in the differential case opposite the end the crownwheel fits.

The bush after fitting will need to be reamed. Ream to 26.16mm 1.03"

£4.25 exc vat

£5.10 inc vat

DIFFERENTIAL PERFORMANCE PIN WITH MOLYBDENUM COATI...

C-BTA164

Competition quality replacement diff pin with anti wear MOLYBDENUM coating for planet wheel surfaces and still cheaper than a standard Rover pin. Recommended for all differential rebuilds.Pay special attention to the condition of the planet wheels wh...

£25.60 exc vat

£30.72 inc vat

DIFFERENTIAL PIN UPGRADE

C-BTA166

Standard replacement precision ground upgraded material standard diff pin. Recommended for all standard differential rebuilds. For performance, use C-BTA164 moly coated pin with standard planet gears. Pay special attention to the conditi...

£13.20 exc vat

£15.84 inc vat

LSD OUTPUT SHAFT - POT JOINT TYPE

C-BTA1263

Outputs for LSD when using inboard CV joints. Sold single with 2 needed per car.

£60.50 exc vat

£72.60 inc vat

CROWNWHEEL + PINION "USED" 3.6 A-PLUS

CWP3-6-A-PLUS

"USED" secondhand crownwheel and pinion 3.647 ratio "A" plus teeth. 17x62 teeth

Sold as seen,some with inner part of bearing still on crownwheel (if they come off without using a puller tool it usually means they have spun, ruining the seati...

£50.00 exc vat

£60.00 inc vat

CROWNWHEEL & PINION 3.47 S/C FOR LIMITED SLIP DIFF

C-BTA1250EVO

New Minispares Evolution straight cut crownwheel and pinion set 3.47. The crownwheel in these kits has a 20% wider gear than previously supplied, and a pinion made from Aero quality steel making it 20% tougher.17x59 teeth count.

Always Check...

£247.50 exc vat

£297.00 inc vat

CROWNWHEEL & PINION 3.75 S/C FOR LIMITED SLIP DIFF...

C-BTA1248EVO

New Minispares Evolution straight cut crownwheel and pinion set 3.75. The crownwheel in these kits has a 20% wider gear than previously supplied, and a pinion made from aero quality steel making it 20% tougher.16x60 teeth count.

Always Check...

£247.50 exc vat

£297.00 inc vat

CROWNWHEEL & PINION 4.066 S/C FOR LIMITED SLIP DIF...

C-BTA1246EVO

New Minispares Evolution straight cut crownwheel and pinion set 4.066. The crownwheel in these kits has a 20% wider gear than previously supplied, and a pinion made from Aero quality steel making it 20% tougher.15x61 teeth count.

Always Chec...

£247.50 exc vat

£297.00 inc vat

DIFFERENTIAL THRUST WASHER 8 THOU OVERSIZE

BTA102

Genuine Rover fibre type are now 48 thou thick which is so tight it will probably lock your diff up, they used to originally be .035 thou. These are 43 thou oversize type for worn units but the correct size of 35 thou is available as BTA101<...

£1.80 exc vat

£2.16 inc vat

CROWNWHEEL + PINION 3.2 RATIO 19/61 teeth