SLIDING WINDOW CATCH LOCKING RUNNER R/H
24A1303

£20.00 exc vat

£24.00 inc vat

In stockIn stock
For Minis with sliding windows on the front doors, these are the runners that hold the channel and have holes to lock the window catches. Now made in stainless steel by Minispares to ease rust problems.

Also see 24A1304 for L/H.

Plastic catches wwere supposedly fitted from chassis number 15069 early may 1963 and for the early runners with metal catches and multi lock holes use 14A6769

£20.00 exc vat

£24.00 inc vat

In stockIn stock

Recommended usage 1 x 24A1303 to fit one mini.
Front Door Glass, Channels, Catches and Regulators - Qty 1

Recommended products
DOOR CHANNEL LOWER SLIDING WINDOW RUNNER MK1/2
24A88

Genuine Mini Spares product-These are copies of the original solid type, with stronger reinforced internal wire and with the holes for drainage and securing.

These fit either side door where the holes line up on the window catch moulding. C...

£20.80 exc vat

£24.96 inc vat
WINDOW CATCH PLASTIC SET
MSSK015

Sliding window Mini models all must now use these black plastic locks for the windows. Our special kit includes a complete set of all the pieces: 4 latches, rubber seals, screws and chrome nuts.This kit is a great saving over buying all the parts ind...

£69.10 exc vat

£82.92 inc vat
Alternative products
WEATHERSTRIP KIT MSSK020 PLUS 24A1303 R/H
MSSK022

Sliding window type weatherstrip kit R/H

kit contains lower and upper sliding channels plus the vertical strip that attaches to the glass as a draught excluder plus the stainless steel window catch runner that the lower channel sits in,with ...

£60.08 exc vat

£72.10 inc vat
Kit products
WEATHERSTRIP KIT MSSK020 PLUS 24A1303 R/H
MSSK022

Sliding window type weatherstrip kit R/H

kit contains lower and upper sliding channels plus the vertical strip that attaches to the glass as a draught excluder plus the stainless steel window catch runner that the lower channel sits in,with ...

£60.08 exc vat

£72.10 inc vat
People also bought products
MK1 DOOR STRIKER AND GUIDE KIT
MSSK066

£42.00 exc vat

£50.40 inc vat
SLIDING WINDOW CATCH SET METAL
MSSK015METAL

Sliding window catches chrome type for classic Mini MK1 & MK2, Traveller, Van, Countryman, Riley Elf and Wolseley Hornet.



Classic Minis and Mini Coopers had chrome metal catches for the sliding windows and channels. Black and white...

£255.00 exc vat

£306.00 inc vat
SQUARE DOOR STRIKER GASKET
FRG10002

The gasket that sits behind the door stiker on all wind up window type minis

on the B post.

£1.00 exc vat

£1.20 inc vat
MK1/2 DOOR CHECK STRAP FITTING KIT
ALE1221FK

Complete fitting kit for the door check straps on all Minis fitted with external hinges.

£29.52 exc vat

£35.42 inc vat
MK 1/2 EXTERNAL HINGE ANGLED SPACER
14A7387

Angled spacer washer for Mk1/2 external door hinge cars for the upper hinge

£0.90 exc vat

£1.08 inc vat
DOOR STRIKER PLATES STAINLESS STEEL PAIR
CZG5254SS

Stainless steel version of CZG5254 door striker plate. These used to be sided on earlier models but now fit either side. CZH627 striker plate lock with a loop fits into this. Supplied in pairs with stainless steel fixing scr...

£11.63 exc vat

£13.96 inc vat
DOOR HINGE SHIM 0.7mm THICK STAINLESS STEEL
ALA6383

Door hinge shim for all wind up window cars, these are used to align the doors, 0.7mm thick and made in stainless steel, use with ALA6382 to get good door alignment. See ALA6381 for thicker rear support plate.

£1.76 exc vat

£2.11 inc vat
MK3 DOOR HINGE SHIM 1.2mm THICK STAINLESS STEEL
ALA6382

Door hinge shim for all wind up window cars, these are used to align the doors, 1.2mm thick and made in stainless steel use, with ALA6383 to get good door alignment See ALA6381 for thicker rear support plate.

£1.76 exc vat

£2.11 inc vat
DOOR HANDLE KIT WITH BOOT HANDLE 1966 ON Mk1 & Mk2
24A2083KIT

Full Mk2 door handle set with 2 front door locking handles and boot handle with matching keys. Fitted from 1966 with the intoduction of the door safety escutcheon boss. This boss is available as 24A1834 and gasket 24A1835.

Regre...

£120.00 exc vat

£144.00 inc vat
DOOR SEAL LOWER L/H TWIN POINT CARS 1996on
CFB101090

Special lower seal--fitted to MPI cars from October 1996 show cars chassis no BD134455 ON

Has a lip on inner edge to hold carpet back and tidy internal trim but other than that the CGA2835MS will fit --the full set is

£24.00 exc vat

£28.80 inc vat
DOOR SEAL LOWER R/H TWIN POINT CARS 1996on
CFB101080

Special lower seal--fitted to MPI cars from October 1996 show cars chassis no BD134455 ON

Has a lip on inner edge to hold carpet back and tidy internal trim but other than that the CGA2835MS will fit --the full set is

£24.00 exc vat

£28.80 inc vat
WINDOW DROP GLASS RUBBER SEAL TO REGULATOR FRAME
24A948

The rubber that sits in the frame to hold the windows on wind up window type doors. The frames are ALA5746/7 or see MSSK2105 also used on Clubman Estate and Traveller rear windows in the finger pull grips.

Sold individually.2 pe...

£2.60 exc vat

£3.12 inc vat
DOOR HINGE LOWER FOR BOTH SIDES MK3 ON
CZH212MS

Lower internal door hinge for either side.

Fits all wind up window type doors from 1970 on.

£14.40 exc vat

£17.28 inc vat
DOOR HINGE R/H UPPER MK3
CZH202MS

Non genuine hinge for R/H upper on wind up window type doors with internal hinges from 1970on. See kit MSS017B for better price.

£14.40 exc vat

£17.28 inc vat
DOOR MOULDING WEATHERSTRIP KIT INNER AND OUTER WIT...
MSSK2104

Genuine Mini Spares mouldings product as supplied to Rover.

These are the later door mouldings that prevent water running down the windows into the door causing rust and have the black platic ends fitted for later car safety regulations but ...

£56.28 exc vat

£67.54 inc vat
WEATHERSTRIP KIT MSSK020 PLUS 24A1303 R/H
MSSK022

Sliding window type weatherstrip kit R/H

kit contains lower and upper sliding channels plus the vertical strip that attaches to the glass as a draught excluder plus the stainless steel window catch runner that the lower channel sits in,with ...

£60.08 exc vat

£72.10 inc vat
DOOR MOULDING & POP RIVETS MK3 L/H
MS68

The Cooper S had these mouldings and this is the same item but made for the MK3 wind up window cars. These are easy to install, drill 1/8" holes evenly spaced on the straight edges,3 each side and 4 at the top(not on any corners)of the window frame.T...

£44.29 exc vat

£53.15 inc vat
CHECK ARM SEAL L/H 1986 ON
CGE10039

Sponge type seal on L/H A post of all minis with wind up window type doors to protect from water running down into body. A part you must keep your eye on to stop rust.

£3.50 exc vat

£4.20 inc vat
CHECK ARM SEAL R/H 1986 ON
CGE10038

Sponge type seal on R/H A post of all minis with wind up window type doors to protect from water running down into body. A part you must keep your eye on to stop rust, if the sponge is gettig hard then replace it.

£3.50 exc vat

£4.20 inc vat
CHECK ARM RUBBER GROMMET O/S 1970-1986
CZH4052

Moulded shape type right hand door stay grommet fitted until 1985 when it was replaced by a flat sponge type seal CGE10038/9.

£2.56 exc vat

£3.07 inc vat