These Swiftune die cast performance pistons are part of their new Heritage range and are manufactured by global leading German F1 piston manufacturer Mahle. These pistons have been developed using their 50 plus years of experience.

Glyn Swif...

998cc flat top 3 ring circlip type piston set as fitted to early A plus to replace 4 ring set type. Gave 10.3 to 1 CR and is a good alternative to use on any 998 with circlip type pistons. Replaced 4 ring (3 ring and scraper) P20754 from Hepolite 198...

998cc flat top 3 ring circlip type piston set as fitted to early A plus to replace 4 ring set type. Gave 10.3 to1 CR and is a good alternative to use on any 998 with circlip type pistons. Replaced 4 ring(3 ring and scraper) P20754 from Hepolite 1980o...

Low drag 1275 piston standard size 2.780 plus 20 thou oversize(Rings included).

This piston has a possible compression ratio of 10.3:1 as fitted to Cooper RSP 1990.

The best performance 1275 pistons are C-STN100 range which have 9.7...

3 OF 0.625 COMPRESSION RINGS AND .1575 OIL CONTROL RING.AT PLUS 40 OVERSIZE FOR P20773 pistons

3 OF 0.625 COMPRESSION RINGS AND .1575 OIL CONTROL RING.

Low drag 1275 piston standard size 2.780 plus 40 thou oversize(Rings included).

This piston has a possible compression ratio of 10.3:1 as fitted to Cooper RSP 1990.Engine then becomes 1310cc

Current pistons differ from the 60s origi...

Set of standard size 998 thrust washers.

Timing cover front plate and tensioner plate bolt and washer kit. Comes with all parts to fit the cover except for the counter sunk screws if fitting a duplex kit (our duplex kits all come with these).

You should replace the camshaft bearings every time the block goes to the machine shop. These bearings fit all late model 1275cc blocks (the ones without tappet covers on the back) It's almost too simple and thus often overlooked during a rebuild. Ca...