£21.76 exc vat

£26.11 inc vat

PISTON SET 998 FLAT TOP CIRCLIP TYPE +60 OVERSIZE

998cc flat top 3 ring circlip type piston set as fitted to early A plus to replace 4 ring set type. Gave 10.3 to1 CR and is a good alternative to use on any 998 with circlip type pistons. Replaced 4 ring(3 ring and scraper) P20754 from Hepolite 1980...

£152.00 exc vat

£182.40 inc vat

PISTON SET 998 FLAT TOP CIRCLIP TYPE +40 OVERSIZE

ADU3490-40

998cc flat top 3 ring circlip type piston set as fitted to early A plus to replace 4 ring set type. Gave 10.3 to1 CR and is a good alternative to use on any 998 with circlip type pistons. Replaced 4 ring(3 ring and scraper) P20754 from Hepolite 1980o...

£152.00 exc vat

£182.40 inc vat

PISTON SET 998 HC CIRCLIP TYPE +20 OVERSIZE

ADU3490-20

998cc flat top 3 ring circlip type piston set as fitted to early A plus to replace 4 ring set type. Gave 10.3 to1 CR and is a good alternative to use on any 998 with circlip type pistons. Replaced 4 ring(3 ring and scraper) P20754 from Hepolite 1980o...

£152.00 exc vat

£182.40 inc vat

PISTON SINGLE 998cc FLAT TOP SILICON PERFORMANCE +...

P20950-40

Owing to non-availability of other good quality 998cc pistons, these Mini Spares Evolution design pistons from a renowned high-performance piston manufacturer are flat top with drilled oil drain-back holes rather than slots behind the rings for maxim...

£35.44 exc vat

£42.53 inc vat

PISTON SINGLE 998cc FLAT TOP PRESS FIT PLUS 40

P22463-40

Available at the moment but they sporadically become unavailable. Mini Spares have also had a batch of plus 60s specially commissioned to us for Grass trackers and racers. sold individually with rings and pin complete.

Ringsets are availabl...

£37.50 exc vat

£45.00 inc vat

PISTON RING SET 998 A PLUS+40

R33636-40

3 OF 0.625 COMPRESSION RINGS AND .1575 OIL CONTROL RING.AT PLUS 40 OVERSIZE FOR P20773 pistons

£59.57 exc vat

£71.48 inc vat

PISTON RING SET 998cc +20 89 ON PRESSFIT

R43240-20

These rings are +20 oversize with 0.59" compression rings and 0.1181" oil ring fo 998cc

£81.60 exc vat

£97.92 inc vat

PISTON RING SET 998/1100 +060

R32026-60

1.59MM (0.625")COMPRESSION RINGS 3.175mm (1/8")single oil control ring.

also available is a high grade ring set C-STN99-60with 3 piece oil ring

£46.32 exc vat

£55.58 inc vat

PISTON SINGLE 1098CC 8.5-1 +20 THOU

P20397-20

This piston for 1098cc engines was designed with 4 rings. The top three compression rings are .0625" thick and the bottom oil ring is .1575" thick. Pin height in this piston design is 2.2855", this results in a compression of 8.5:1 in most standard ...

£51.26 exc vat

£61.51 inc vat

+60 FLAT TOP MEGA PISTON - SINGLE

C-AJJ3382-60

These are plus 60 oversize and for other details see C-AJJ3382-40

AE Hepolite is now owned by Federal Mogul and trademarked "Nural"

These super high-quality FM-B2 cast pistons ensure the alloy has the best molecular consistency w...

£50.74 exc vat

£60.89 inc vat

MINI SPARES COMBINED BLOCK/GEARBOX GASKET AND SEAL...

AJM100MS

Mini Spares best quality complete gasket and seal kit for engine block and gearbox,for all common engine types and sizes.

Also comes complete with Mini Spares Evolution clutch oil seal 13H2934MS, differential oil seals...

£26.00 exc vat

£31.20 inc vat

TIMING CHAIN SINGLE ROW SPECIAL QUALITY

3H2127EVO

Special superb extra strong timing chain with very limited stretch using modern day materials and technology to keep your timing correct and will fit any A series engine using a single row chain.

This chain saves all the time and effort requ...

£22.05 exc vat

£26.46 inc vat

NUT FOR 1300 CON ROD AS USED ON C-STR289

C-STR290

These shouldered hexagonal con rod nuts are made by ARP in the USA and considered the best available FITS 1300 con rods plus MGB late 18V engine numbers with 11-32" bolts.Sold singly and 8 required per engine.

£1.39 exc vat

£1.67 inc vat

ENGINE TO GEARBOX NUT AND BOLT KIT

MSSK060

Complete nut, bolt and washer set for engine to gearbox only

£3.50 exc vat

£4.20 inc vat

OIL FILTER HOUSING RACE/ROAD 1991 ON

LPX10026RACE

Billet oil filter housing for engines with 12A prefix-Uses 88G402 gasket.

The original is no longer available but this is an upgraded version to stop flexing and cracking especially sort after by racers.

Should be used ...

£63.75 exc vat

£76.50 inc vat

BIG ENDS PLUS 40 OVERSIZE 998/1100 COOPER S

AEB572-40

Con Rod bearings, 850-1275 1 5/8" journals. Heavy duty steel backed bearing for durability and long life. The bearings to use if you want it to last. The only bearings to use on a fast road motor.

( Tri-Metal )

Sintered copper lead...

£28.02 exc vat

£33.62 inc vat

SIMPLEX TENSIONER 6 PIECE KIT

MSSK051

Parts required to stop timing chain rattle on A plus engine with single row chain.Last chance to buy the plate and pin to hold the tensioner as they are

obsolete from Rover.

It is worth the expence to fit MSSK051EVOkit...

£21.06 exc vat

£25.27 inc vat

PUSH ROD 1275 AFTERMARKET

AEG314MS

NON GENUINE for standard use only. These are the only type available at the moment and not as accurate as the original Rover product. The genuine factory pushrod was a very good product and does not need routine replacement. The strength and size of ...

£2.70 exc vat

£3.24 inc vat

ORIGINAL TYPE CAM FOLLOWER FOR FAST ROAD USE

2A13EVO

Mini Spares cam follower with original convex bottom Radii as used by BMC/Rover and made by Clanceys but less the oil hole. Using Clancey drawings and to our design for better cam performance and lift we have made the push rod recess deeper for stabi...

£2.88 exc vat

£3.46 inc vat

998cc PUSH ROD - PERFORMANCE

C-AEG581

Price per rod-850/998/1098cc larger 6.35mm diameter. One piece rod which are sold per single rod and 8 required per engine.

The larger diameter improves push rod rigidity as much as possible

without having to modify the block/head ...

£8.38 exc vat

£10.06 inc vat