BUDGET CHILLED IRON CAM FOLLOWER NO OIL HOLE

See 2A13EVO for the best product with no oil hole.

Some advertise the 2A13 cam followers as heavy duty but these are just a budget flat bottomed type for low performance or standard use only.

Never replace a camshaft w...

£1.36 exc vat

£1.63 inc vat

ORIGINAL TYPE CAM FOLLOWER FOR FAST ROAD USE

2A13EVO

Mini Spares cam follower with original convex bottom Radii as used by BMC/Rover and made by Clanceys but less the oil hole. Using Clancey drawings and to our design for better cam performance and lift we have made the push rod recess deeper for stabi...

£2.88 exc vat

£3.46 inc vat

1275cc PUSH ROD - PERFORMANCE

C-AEG582

Price per rod-1275cc larger 6.35mm diameter push rod. Sold per single rod and 8 required per engine.

The larger diameter improves push rod rigidity as much as possible

without having to modify the block/head push rod ports. Thi...

£8.62 exc vat

£10.34 inc vat

MINI 1275 CAM LINER SET

MS3063

You should replace the camshaft bearings every time the block goes to the machine shop. These bearings fit all late model 1275cc blocks (the ones without tappet covers on the back) It's almost too simple and thus often overlooked during a rebuild. Ca...

£15.75 exc vat

£18.90 inc vat

CAM LINER SET 1275

ACL3063

You should replace the camshaft bearings every time the block goes to the machine shop. These bearings fit all late model 1275cc blocks (the ones without tappet covers on the back) It's almost too simple and thus often overlooked during a rebuild. Ca...

£15.75 exc vat

£18.90 inc vat

1275cc PUSH ROD - PERFORMANCE

C-AEG582

Price per rod-1275cc larger 6.35mm diameter push rod. Sold per single rod and 8 required per engine.

The larger diameter improves push rod rigidity as much as possible

without having to modify the block/head push rod ports. Thi...

£8.62 exc vat

£10.34 inc vat

CAMSHAFT LINER SET 850 998 & 1100

AEC3046

Replace with new camshaft,it's almost too easy to overlook during a rebuild. Camshaft bearings are pressed into the block and thus are usually done by a machine shop. You would not rebuild an engine without replacing the rod bearings, so why not the ...

£12.09 exc vat

£14.51 inc vat

BELT KIT OIL SEAL SMALL

BELTSEAL1

Lower rubber seal for belt-drive timing gear.

£1.50 exc vat

£1.80 inc vat

CAMSHAFT RETAINING NUT

6K629

Special flat nut (1-5/16" AF) for camshafts, uses 2A759 locktab.

£6.16 exc vat

£7.39 inc vat

PRE A+ TIMING GEAR FRONT PLATE (NON TENSIONER TYPE...

AEG161

Genuine Mini Spares engine front plate for pre A+ plus timing gear.

this fits engines using the early egg shaped cover

This plate has been modified by counter sinking the 2 main cap bolt holes to accept countersu...

£24.75 exc vat

£29.70 inc vat

AC DODD ROAD TORQUE CAMSHAFT

ACD-RT

AC Dodd Road Torque cam, great for low end power. Please see picture for full cam specs.

Road torque, this cam for strong low & mid range lugging, Touring, Smooth idle, excellent emmisions

ACD - RT

Power...

£214.40 exc vat

£257.28 inc vat

PISTON RING SET 998/1100 +60

C1072-60

Steel ring set, 3 compression ring @ 0.625" oil ring 0.125 as per original 998 pre A plus and 1098cc versions inc morris minor and sprite range.

£44.80 exc vat

£53.76 inc vat

PISTON RING SET 998/1100 +40

C1072-40

Steel ring set, 3 compression ring @ 0.625" oil ring 0.125 as per original 998 pre A plus and 1098cc versions inc morris minor and sprite range.

£44.80 exc vat

£53.76 inc vat

TIMING COVER AND FRONT PLATE FITTING KIT

MSSK063

Timing cover front plate and tensioner plate bolt and washer kit. Comes with all parts to fit the cover except for the counter sunk screws if fitting a duplex kit (our duplex kits all come with these).

£8.00 exc vat

£9.60 inc vat

SWIFTUNE PERFORMANCE DIE CAST PISTON SET 1275 +40

C-STN103-40

These Swiftune die cast performance pistons are part of their new Heritage range and are manufactured by global leading F1 German piston manufacturer Mahle. These pistons have been developed using their 50 plus years of experience. Glyn Swift was usi...

£299.00 exc vat

£358.80 inc vat

REPLACEMENT SEAL O-RING FOR MSA1134. MSA1124/5 DIP...

TRS1316

Replacement O ring for the Minispares range of chrome dipticks

£0.10 exc vat

£0.12 inc vat

CRANK THRUST WASHER SET +0.003" 1275

ACL2136-003

Set of +0.003" size 1275 crank thrust washers.

£11.25 exc vat

£13.50 inc vat

MINI SPARES COMBINED BLOCK/GEARBOX GASKET AND SEAL...

AJM100MS

Mini Spares best quality complete gasket and seal kit for engine block and gearbox,for all common engine types and sizes.

Also comes complete with Mini Spares Evolution clutch oil seal 13H2934MS, differential oil seals...

£26.00 exc vat

£31.20 inc vat

MAINS +10 1275CC A PLUS ONLY ACL RACE