Jet bearing kit for HS4 carb for swinging needle type. This includes the adjusting nut, spring etc.

£21.77 exc vat

£26.12 inc vat

Before the days of Aeroquip, Minis were fitted with braided steel rubber fuel lines. They should be used in place of rubber for all fuel lines in the engine compartment. They come made to length, with rubber end caps. 1/4" bore size.

This is...

£7.30 exc vat

£8.76 inc vat

15" BRAIDED PETROL PIPE 1/4" BORE

PPK6

Before the days of Aeroquip, Minis were fitted with braided steel rubber fuel lines. They should be used in place of rubber for all fuel lines in the engine compartment. They come made to length, with rubber end caps. 1/4" bore size.

Orange ...

£4.24 exc vat

£5.09 inc vat

FLOAT NEEDLE VALVE HS2/4/6 (VITON TIPPED)

WZX1100A

This is the original type of needle valve that governs the plastic fuel float in your SU carb.

An alternative better upgraded version is available as CA90.

£10.38 exc vat

£12.46 inc vat

CARB DASHPOT OIL FOR SU RANGE

BDR125

Correct and original thickness oil for SU carb dashpots.

£7.43 exc vat

£8.92 inc vat

CARB JET HS4 MINI TYPE RED

AUD9451A

Original type jet with red plastic end for HS4 carbs---If you have the later nylon coated jet see part number LZX1111A.

£12.00 exc vat

£14.40 inc vat

CARB FLOAT LUG 20° ANGLE L/H

AUD2677

Left hand (front) grommet to angle the float bowl at 20 degrees, sometimes found on early mini HS4 twins but all mini should have 30 degree angles. See AUD2676 for right hand (rear) . This was used on MGB HS4 an...

£10.17 exc vat

£12.20 inc vat

CARB SPRING (RED 4.5oz) HS TYPE CARBS

AUC4387

Standard spring for all HS2 and HS4 on minis except for the 997/998 Cooper from 1964-9 and H4 special tuning carbs which used AUC4587.

£7.59 exc vat

£9.11 inc vat

THROTTLE RETURN SPRING FOR TWIN CARBS

AEC2075

Throttle return springs for all twin carb variants. Usually 3 fitted.

£1.28 exc vat

£1.54 inc vat

CHOKE CABLE TRUNNION ACH9042 NIPPLE & 53K3503 SCRE...

AUE34

Complete with screw the choke trunnion is used on nearly all SU carb linkages.

See ACC5062 for carb cable link trunnion also.

£2.03 exc vat

£2.44 inc vat

"T" PIECE 1/4" SU TWINS MTP001

12H889

Used in petrol fuel lines to take 1/4" petrol hoses it is used mainly on twin carb set ups for petrol being diverted to the 2 carbs.

£4.50 exc vat

£5.40 inc vat

FIXED NEEDLE GY

AUD1468

998 COOPER STD NEEDLE

£6.75 exc vat

£8.10 inc vat

PIPE TWIN SU CARB TO CARB

12G292

original shape of petrol feed pipe for twin HS" carbs as fitted to all the Coopers

£9.44 exc vat

£11.33 inc vat

ACCELERATOR RETURN SPRING FOR HS2/4 CARB

1E5537

This throttle return spring fitted every HS2/4 single SU carb and also on the twins as fitted by the factory. Twin carbs used AEC2075 for choke return. Total length 90mm.

£1.90 exc vat

£2.28 inc vat

CARBURETTOR LEVER PIN

ACC5062

Pin to hold the accelerator cable which locates in the carb bracket lever. Supplied as originally fitted with washers, nut and split pin plus a proper machined hole for the cable unlike many others on the market- which come either bare or with wrong ...

£2.93 exc vat

£3.52 inc vat

FIXED NEEDLE AN

AUD1478

"AN" needle for your SU carb.

£6.75 exc vat

£8.10 inc vat

CARB SEAL ON FLOAT BOLT ON CARB BODY TWIN HS2/4 ON...

AUC1318

This seal sits against the head of the bolt that holds the float bowl on the other side of the body on HS2/4 twin carbs only.sold singly,2 required per car

£3.87 exc vat

£4.64 inc vat

CARB SPRING (BLUE 2.5oz)HS TYPE CARB

AUC4587

The lighter weight blue spring was rarely used as standard on HS2 single and twin carbs but the heavier red spring AUC4387 was. Noticable excetions to this where they fitted this spring are- Mini Cooper 997/8 1964-69

£8.73 exc vat

£10.48 inc vat

CARB TO MANIFOLD GASKET 1.75" (HS6 and all HIF)

88G429B

Mini Spares own performance upgrsded paper gasket that sits either side of the carb to manifold spacer on HIF38/44 type 1.75" carbs.Sold singly, order quantity as required to suit your car.

£0.42 exc vat

£0.50 inc vat

HEAT SHIELD STAINLESS STEEL KIT HS2 TWIN CARBS

MSSK1005

Stainless steel twin HS2 heatshields kit. Comes with link bar, bolts, nuts and springs.

£27.98 exc vat

£33.58 inc vat