£22.77 exc vat
£27.32 inc vat
In stock
This part is supplied when we sell a new cap but if this part is ever required seperate we keep them in stock.
£22.77 exc vat
£27.32 inc vat
In stockRecommended usage 1 x COL25 to fit one mini.
Flat racing type cap with large opening catch in chrome with collar
To fit the collar for this cap you will require 10mm(0.3937")just over 3/8" of petrol tank neck accessable above the body seal to allow fitment, many later cars do not have ...
This is one of the best looking gas caps you will ever add to you car. Very high polished chrome with a flare. The 'flip top' and 'push button' opening cap was made famous by some of the most historic cars ever raced at such famous tracks as 'Monza...
Flat racing type alloy cap with large opening catch with fitting collar.
To fit the collar for this cap you will require 10mm(0.3937")just over 3/8" of petrol tank neck accessable above the body seal to allow fitment,many later cars do not h...
Original classic looking Monza non locking ALLOY cap with the mounting collar to fit tank included.See MONZA also for description
To fit the collar for this cap you will require 10mm(0.3937")just over 3/8" of petrol tank neck ac...
Upper door moulding rivet for Cooper S door trim. For Mk1 usually 1 at front and 3 at back making 4 per side and on Mk2 there were 2 per end at bottom making 4 per side. This is the 10mm head rivet and not required on our own 14A9773/9774 trims that ...
Wiper mounting kit for Mk1 Mini's (3 required per car). Each kit comes with a pin, nut, 2 washers and mounting rubber.
Genuine Mini Spares product. The seal that goes on the neck of petrol tanks as protection against water intrusion and to also to make the hole look neater, so replace them when they crack or shrink through heat. This is the original fatter type as us...
Original shape washer jet for Mk1/2 minis. Made to the same specification as the last type made for rover parts sales with a nut on a loose thread so it can be tightened easily by hand in the engine bay without any modifications. Should be used with ...
Support for L/H petrol tank.
5/16" bore petrol hose for injection cars sold in metre lengths.
Resilient to heat,weather and suitable for ethanol in modern day fuels.100psi max.R9 spec.
5.5 gallon left hand tank with twist in sender unit.
For all mini saloons from 1964 until 1980 except Elf and Hornet. Also except the 1275GT from 1974 which used the later 7.5 gallon tank which became standard fitment to all mini saloons fro...
This very heavy duty bonnet strap is a excellent reproduction of the original factory Special Tuning department special. A copy of our Tan leather strap, but now available in black.
3.3mm thick from the tanneries for use on horse bridles,wit...
Original MK1/2 shape Windscreen washer cycle type bottle clip, about 1964 on.
Has yours disappeared, or just disintegrated with age?
The original winguard MK1 bottle part number was ADA3833 NOW 17H2536 for MK1/2.
<...
Factory fitted rivet for the mini special wheel arches, the plastic type fitted as standard from 1984 to cover 12" wheels.
16 required but beware of the front rivet on the rear wheel arch as it goes through a double skin. 5/32" TYPE 7/16" LO...
Gasket/seal for mounting the fuel pump to tank for SPI and MPI Mini's
New Stainless steel door mounted mirror, complete with fixings for all 1980 onwards Mini's. This ensures they are a direct swap for the standard Black plastic and painted door mirror's. These stainless mirror's are mounted on a very high quality chro...
Seal to fit between union WKB10019 and the fuel filter on injection cars.
This is a copy of one of the best looking gas caps you will ever add to you car. Polished chrome with a flare. The "'flip top' and 'push button' opening cap was made famous by some of the most historic cars ever raced at such famous tracks as 'Monz...
Vent pipe from petrol tank
late cars were only 765mm or 31" approx, but Mk1 cars were 54"
Union for fuel filter outlet to fuel pipe on single point injection cars and early MPI (TO WD169573). Requires 2 EDP9976 seals. On later cars the union on the fuel line screws directly to the filter.
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.