EXHAUST SINGLE BOX 850/1000
GEX106

£41.60 exc vat

£49.92 inc vat

In stockIn stock
Standard single box silencer exhaust for the 850/998cc saloon.

Now designed by our RC40 team as a 2 piece system for easier fitment and transportation, this fits from the original cast iron inlet/exhaust manifold

right to the rear bumper it has the GEX7053 front clamp and GEX7052 centre clamp plus the joining U clamp attached. If you also need the fitting kit,see GEX9551.

other parts required

centre bracket GEX7082

centre rubber mounting GEX7081

rear bracket GEX7084

rear cotton reel mounting GEX7251

manifold clamp GEX7046

Doesn't fit cars with floor start.

£41.60 exc vat

£49.92 inc vat

In stockIn stock

Recommended usage 1 x GEX106 to fit one mini.
Exhaust RC40 1275GT / Cooper S - Qty 1

Alternative products
EXHAUST SYSTEM WITH TWIN BOX FOR SALOON SMALL BORE
GEX177

Twin box exhaust system for all 850/998/1100 saloons

Now designed by our RC40 team as a 2 piece system for easier fitment and transportation, this fits from the original cast iron inlet/exhaust manifold

right to the rea...

£56.00 exc vat

£67.20 inc vat
People also bought products
CAST IRON MANIFOLD TO DOWNPIPE CLAMP
GEX7046CAST

Exhaust manifold to downpipe clamp. For 32mm o/d pipe size.

The key to eliminating exhaust leaks at the manifold flange is the clamp. These cast clamps are the best style to use. A real piece of kit to use eradicating a multitude of likely p...

£7.20 exc vat

£8.64 inc vat
CATALYTIC CONVERTER 1275cc 1990 ON EU MARKET(TUV A...
RV8009E

Identical to RV8009 catalytic converter however this has been type approved for use in the EU, TUV approved.



Will fit all mini models with a cat, if you require new bolts the part numbers is FB110351 and ...

£91.71 exc vat

£110.05 inc vat
MANIFOLD TO DOWNPIPE EXHAUST CLAMP
GEX7046

Exhaust manifold to downpipe clamp.

The key to eliminating exhaust leaks at the manifold flange is the clamp. These new clamps include proper brass nuts and support washers. Fits most 850cc, 948cc, 998 etc. Those engines with single carb an...

£2.50 exc vat

£3.00 inc vat
CATALYTIC CONVERTER ASSEMBLY 1275cc 1990 ON
RV8009

Catalytic converter to fit all mini models and if you require new studs the part number is FB110351 and the nuts to fit the studs are NV110051.

All are M10 metric thread.

£49.50 exc vat

£59.40 inc vat
EXHAUST SYSTEM WITH TWIN BOX FOR MINI VAN. ESTATE ...
GEX155

Twin box silencer for Van, Estate,Pickup

Now designed by our RC40 team as a 2 piece system for easier fitment and transportation, this fits from the original cast iron inlet/exhaust manifold right to the rear bumper. It has the ...

£64.00 exc vat

£76.80 inc vat
EXHAUST DOWN PIPE WHEN HIF38 CARB EXCEPT AUTO
GEX12052

downpipe from the exhaust manifold on the petrol 1275cc Ritz and Italian Job mini 1991/3 which had the 1.5" HIF38 carb. The automatic version of this down pipe is GEX12054

£28.50 exc vat

£34.20 inc vat
EXHAUST SYSTEM WITH TWIN BOX FOR SALOON SMALL BORE
GEX177

Twin box exhaust system for all 850/998/1100 saloons

Now designed by our RC40 team as a 2 piece system for easier fitment and transportation, this fits from the original cast iron inlet/exhaust manifold

right to the rea...

£56.00 exc vat

£67.20 inc vat
POLYURETHANE REAR COTTON REEL EXHAUST MOUNT
GEX7251POLY

The very rear bobbin type mounting rubber on every mini made until the introduction of a rubber hanger strap in 1992. When the RC40 or similar systems are fitted, 2 will be required. This is a stronger poly version.

£2.70 exc vat

£3.24 inc vat
RC40 REAR TWIN BOX SYSTEM FROM CATALYST BACK
C-STR812

Rear RC-40 twin box system to fit catalyst for cars built late 1991 on SPI(not early carb coopers). It has the hanger rods fited for mounting onto the rubber type straps. This makes it a twin box system with a little throatier pleasing note, but a mu...

£67.34 exc vat

£80.81 inc vat
MANIFLOW CENTRE EXIT SINGLE BOX 1.75" BORE EXHAUST...
C-ARA332SB

1.75" bore single box, centre exit exhaust system. This exhaust system by Maniflow is straighter and louder than our RC40 system. Very high quality with a skid plate on the bottom of the silencer and a polished stainless tip. Suitable for use with an...

£90.63 exc vat

£108.76 inc vat
EXHAUST TAILPIPE TRIM FOR VAN/ESTATE fits 45mm ID
RC40-005

Stainless steel tailpipe trim with hanger bracket designed for fitting to the tailpipe of RC40 rear box as an extension piece. This is part of our RC40PACKAGE015 kit for Van/Estate and Pickup exhaust system when a freeflow o...

£25.44 exc vat

£30.53 inc vat
BLANKING PLUG FOR LAMBDA SENSOR HOLE
MYB100040

Blanking plug to blank of the Lambda sensor hole on all SPI/MPI models.

£2.63 exc vat

£3.16 inc vat
CATALYST M10 BOLT METRIC FOR CAT FLANGE
FB110351

M10 metric flanged bolt 35mm long for catalytic converter. (4 required per unit)

£1.22 exc vat

£1.46 inc vat
PERFORMANCE STAGE 1 KIT 1275 LARGE BORE CENTRE EXI...
C-STN18D

Performance Stage one kit for 1300cc models with HIF44 Carb with centre exit exhaust system RC40-12

£290.43 exc vat

£348.52 inc vat
MANIFOLD CLAMP 1.75" COOPER FREEFLOW WITH TAG FLAT...
C-AHT98

This is the clamp on the cooper freeflow manifold to clamp it to the engine for extra support, supplied with tag.

£4.95 exc vat

£5.94 inc vat
MANIFOLD LCB EXHAUST STAGE 2 WITH SPECIAL CENTRE B...
C-AEG376

Standard bore road LCB (1-3/4"id) that has an enlarged and reshaped middle pipe which creates a type of vortex, simulating a pulsing effect similar to the outside two pipes,thus producing an improved BHP,Torque and power curve.Ideal for very hot smal...

£118.54 exc vat

£142.25 inc vat
BRACKET ON GEARBOX TO HOLD EXHAUST (LARGER VERSION...
GEX7088

Original exhaust bracket for rod change gearbox but later on Rover reverted back to GEX7526 which seemed a bit of a backward cost cutting exercise.

£6.80 exc vat

£8.16 inc vat
CATALYTIC CONVERTER NUT M10 METRIC
NV110051

THE M10 METRIC NUT THAT SCREWS ON THE THREAD BOLTS OF THE CATALYLITIC CONVERTER

£0.61 exc vat

£0.73 inc vat
RC40 SHORT DOWN PIPE FOR TWINBOX TO LCB MANIFOLD
RC40-002

LCB pipe for RC40 twin box.

This pipe is the correct length when using our range of standard bore LCB

such as C-AEG364 & C-AEG365.

1.750"OD

£9.98 exc vat

£11.98 inc vat
MANIFOLD STD BORE MILLENNIUM LCB WITH CAST FLANGES
C-AEG364

Standard bore Budget priced LCB (1-3/4"id) with pre cast flanges to improve flow and save engine tuners time matching the ports. This is ideal for very hot small bore engines and for standard to high performance 1275s, including road 1380s.

£64.50 exc vat

£77.40 inc vat