CARB SPACER HIF44 (0.56"thick) 14.46mm

GUG705602GM

£10.00 exc vat

£12.00 inc vat

In stock

Spacer with gaskets fitted for any 4 bolt fitting carb such as HS6 HIF range about 9/16" (14.5mm). As this is the only thick spacer you need to check stud length.

£10.00 exc vat

£12.00 inc vat

In stock

Recommended usage 1 x GUG705602GM to fit one mini.

Emission, Carburettor Fittings and engine controls - Qty 1

Carburettor Fixings, Throttle Pedal & Abutment Br - Qty 1

Alternative products

MANIFOLD ADAPTOR 1.75" (6.3mm) THICK WITH VACUUM T...

MFA446

Carb to manifold spacer with facility for fitting a vacuum gauge. This is suitable for HS6 and HIF44 and is 6.3mm thick.

£17.93 exc vat

£21.52 inc vat

HIF44 CARB SPACER - 3/8"/9.5mm

GUG705964GM

Spacer suitable for HIF44/38 carbs, 9.5mm thick and supplied without gaskets.

picture shoen is only to illustrate use of gaskets GUG705561GM.

£9.90 exc vat

£11.88 inc vat

Kit products

SPI TO HIF44 CARB CONVERSION KIT

C-STN23

To convert a standard UK spec Single Point Injection car to HIF44 carb. This kit includes wiring looms,fuel tank,fuel pump, carb, air filter and inlet manifold.

£1,424.57 exc vat

£1,709.48 inc vat

People also bought products

HIF44 CARB LINKAGE

LZX1739

£28.98 exc vat

£34.78 inc vat

HIF44 CARB LINKAGE

JZX1603

£7.94 exc vat

£9.53 inc vat

RETURN SPRING KIT FOR HS4

WZX1335

Return spring kit for HS4 carburettor spindle.

£7.65 exc vat

£9.18 inc vat

CARB HIF38/44 ABUTMENT BRACKET

CAM4942

Metal bracket that fits between the manifold and the HIF44 (1.75")carb to hold the cable - the choke cable clip for this bracket is CZK6491. Also for HIF38. For HS4 carb see 12G766 bracket. Original Turbo type [...

£11.93 exc vat

£14.32 inc vat

STUD HS4/HIF CARB + some 12G103 HOUSING (5/16")

CHS2514

Universal stud made for fitting the HS4/HIF carb to the manifold (except HS6 with alloy spacer on cast one piece manifold which requires CHS2515 (5.8mm longer)) and it also fits the cylinder head to take the thermostat housi...

£0.78 exc vat

£0.94 inc vat

MANIFOLD STUD FOR TWIN HS2 INLET

CHS2614

Originally quoted as the HS2 twin carb manifold stud it is one thread longer than CHS2613 which was for single HS2 and spin on oil filter head to the block. UNC course thread for manifold or block and UNF for th...

£1.83 exc vat

£2.20 inc vat

HEAT SHIELD BLACK KIT TWIN HS2

MSSK008

Twin carb HS2 (1.25")black heatshields with link bar and 3 new return springs.

£26.47 exc vat

£31.76 inc vat

15" BRAIDED PETROL PIPE 1/4" BORE

PPK6

Before the days of Aeroquip, Minis were fitted with braided steel rubber fuel lines. They should be used in place of rubber for all fuel lines in the engine compartment. They come made to length, with rubber end caps. 1/4" bore size.

Orange ...

£4.24 exc vat

£5.09 inc vat

HEATER AND CHOKE CABLE CLIP HIF CARB

CZK6491

Clip on the heater valve for heater cables on vehicles from 1990 where the in line remote heater valve was used. It has also been used as a clip for HIF carbs to hold the cable but the one from Rover is 13H3472.

£1.35 exc vat

£1.62 inc vat

10" BRAIDED PETROL PIPE 1/4" BORE

PPK4

£4.00 exc vat

£4.80 inc vat

HIF44/HIF6 CARB ELBOW GASKET

GUG705576GM

GASKET BETWEEN CARB AND AIR CLEANER ALLOY ELBOW

£0.38 exc vat

£0.46 inc vat

HEAT SHIELD STAINLESS STEEL KIT HS4 TWIN CARBS

MSSK1006

Stainless steel twin HS4 heatshields kit. Comes with Link bar and springs.

£27.56 exc vat

£33.07 inc vat

THROTTLE RETURN SPRING FOR TWIN CARBS

AEC2075

Throttle return springs for all twin carb variants. Usually 3 fitted.

£1.28 exc vat

£1.54 inc vat

TWIN CARB SPINDLE LEVER RH

AUE586

This is the right hand linkage lever taht sits on the rods between HS type twin carbs. Sold individually

£1.87 exc vat

£2.24 inc vat

GASKET 1.25" HS2 CARB (GUG705831GM)

1G2624B

Manifold to carb gasket for HS2 single and twin carbs, usually 3 per carb required.

£0.47 exc vat

£0.56 inc vat

"T" PIECE 1/4" SU TWINS MTP001

12H889

Used in petrol fuel lines to take 1/4" petrol hoses it is used mainly on twin carb set ups for petrol being diverted to the 2 carbs.

£4.50 exc vat

£5.40 inc vat

ACCELERATOR RETURN SPRING FOR HS2/4 CARB

1E5537

This throttle return spring fitted every HS2/4 single SU carb and also on the twins as fitted by the factory. Twin carbs used AEC2075 for choke return. Total length 90mm.

£1.90 exc vat

£2.28 inc vat

CARB TO MANIFOLD GASKET 1.75" (HS6 and all HIF)

88G429B

Mini Spares own performance upgrsded paper gasket that sits either side of the carb to manifold spacer on HIF38/44 type 1.75" carbs.Sold singly, order quantity as required to suit your car.

£0.42 exc vat

£0.50 inc vat

HEAT SHIELD STAINLESS STEEL KIT HS2 TWIN CARBS