MK1 HEADLINING KIT GREY
HL3000P

£129.05 exc vat

£154.86 inc vat

Special orderSpecial order
Mk1 1962 on grey headlining that fitted on 2 hoop type frames whereas the Mk3 had individual rods. This is for Mk1 saloons only, see 5D4085 for cream crackle. (Does not include the framework).

£129.05 exc vat

£154.86 inc vat

Special orderSpecial order

Recommended usage 1 x HL3000P to fit one mini.

Alternative products
Mk1 HEADLINING KIT. CREAM CRACKLE
5D4085

Mk1 1962 on crackle effect cream headling that fitted on 2 hoop type frames whereas the Mk3 had individual rods. This is for Mk1 saloons only. Earlier cars had a light grey headlining which is available to order under HL3000P. (Does not ...

£126.73 exc vat

£152.08 inc vat
People also bought products
ROOF SOUNDPROOFING FELT ALL SALOON MODELS
HL3032

Our lightweight underfelt kit is the perfect companion when fitting a new headlining. Made from lightweight felt and cut to size, this fits into the cavity of the roof before fitting your new headlining and provides increased sound insulation and pro...

£25.83 exc vat

£31.00 inc vat
SUNVISOR 1959-1964 IN CREAM CRACKLE FINISH
SV2000C

This was the first style of sunvisor pad with central pivot point in cream crackle finish used on the early Minis.Some very early minis used pale grey for std but all Supers had crinkle finish cream to match headling. For this period the Cream Crackl...

£38.88 exc vat

£46.66 inc vat
HEADLINING AND SEAT COVER CLIP SET (20 per set)
C707

The clips that hold the seat squab vinyl to the frame on front seats and the headlining. These clips are available seperately as GHF1500.

£4.96 exc vat

£5.95 inc vat
DOOR POCKET TRIM EARLY SCREW LUG TYPE MK1
14A6879

The chrome moulding to fit the door bin on first 80 thousand MK1 minis with extra length tag with screw hole for location.

This is held on by screws but a single sided prong clips ADH3809 can be used in the centre - beware other...

£13.00 exc vat

£15.60 inc vat
INTERIOR DOOR HANDLE MK1/2
GLZ119A

MK1/2 interior door handle with screw and washer.

This solid "spoon" handle is brittle and easily broken.

These are the original shape as sold under the Unipart label, not the later Rover bagged item which was a reproduction with d...

£19.64 exc vat

£23.57 inc vat
BLACK VINYL FOR DASH/PER ROLL
DT3028A

127cm long and 43cm wide this is enough leather cloth trim that fitted S and deluxe models on the upper and lower facia plus the winscreen A posts. Fitting instructions are included but no glue.

£14.63 exc vat

£17.56 inc vat
GEAR LEVER RUBBER GAITER REMOTE TYPE
22A608

Reproduction gear lever gaiter for all remote control type gearboxes with the short gear lever by the driver's seat. The metal retainer for this gaiter is 14A9942. These were fitted until the introduction of the rod change type [link]CZH...

£23.65 exc vat

£28.38 inc vat
SLIDING WINDOW PLASTIC CATCH N/S/R
24A1197

Plastic window locks for sliding windows, metal ones are no longer available.

24A1194 = Right Front

24A1195 = Left Front

24A1196 = Right Rear

24A1197 = Left Rear

£10.23 exc vat

£12.28 inc vat
BOOT BOARD BLACK CARPETED. TWIN TANKS 5.5 GALLON
CCC112

If you have twin original 5.5 gallon tanks this 26" wide boot board is the one for you.

£69.00 exc vat

£82.80 inc vat
SLIDING WINDOW PLASTIC CATCH N/S/F
24A1195

Plastic window locks for sliding windows, metal ones are no longer available.

24A1194 = Right Front

24A1195 = Left Front

24A1196 = Right Rear

24A1197 = Left Rear

£10.23 exc vat

£12.28 inc vat
SLIDING WINDOW PLASTIC CATCH O/S/R
24A1196

Plastic window locks for sliding windows, metal ones are no longer available.

24A1194 = Right Front

24A1195 = Left Front

24A1196 = Right Rear

24A1197 = Left Rear

£10.23 exc vat

£12.28 inc vat
DOOR HANDLE ESCUTCHEON SEAL MK1/2 AND VANS
ADA3817

Seal for door handles MK1/2 and all sliding window exterior hinge cars.

also used on 14A7195 mk1 boot handlle used on mk1/mk2 and van/estate



is oval shaped



for boot / rear door use the hole at the rear ...

£2.25 exc vat

£2.70 inc vat
DOOR KICK PLATE MK1/2 L/H
14A7177

This polished aluminium corner plate fits over the leading edge of the MKI/II door pocket to add protection and class. Only the Nearside plate is supplied.

£12.80 exc vat

£15.36 inc vat
GAITER RING FOR REMOTE CHANGE
14A9942

"Remote" gearshift boots 22A608 are readily available in aftermarket quality. Unfortunately, this metal retaining band had been unavailable from normal sources so we at Mini Spares recently took it upon ourselves to have our own manufac...

£11.25 exc vat

£13.50 inc vat
BULKHEAD BLANKET MK1/2
24A280

OEM firewall soundproof. These OEM style soundproof mats will fit right on any MkI/MKII Mini. Cutouts are there for the fresh air hose, hinges, wiring and wiper motor. The felt/jute is flame resistant on one side. You will notice the difference!

£14.56 exc vat

£17.47 inc vat
DOOR POCKET MOULDING
24A1169

The chrome moulding to fit the door bin on all sliding type window doors, MK1/2 and all vans/pickups. See 14A6879 for early cars with lug ends held on by screws

Use the correct single sided prong clips only ADH3809 ...

£12.50 exc vat

£15.00 inc vat
SLIDING WINDOW PLASTIC CATCH O/S/F
24A1194

Plastic window locks for sliding windows, metal ones are no longer available.

24A1194 = Right Front

24A1195 = Left Front

24A1196 = Right Rear

24A1197 = Left Rear

£10.23 exc vat

£12.28 inc vat
LOWER DASH RAIL CHROME MOULDING STRIP
14A8009

The lower brightwork moulding for finishing off the lower dash, crash pad rail or on earlier cars the painted metal surface of the panel which holds the switch panel section.See 14A8010 for clip

This moulding was fitted to all m...

£32.00 exc vat

£38.40 inc vat
DOOR KICK PLATE MK1/2 R/H
14A7176

This polished aluminium corner plate fits over the leading edge of the MKI/II door pocket to add protection and class. Only the Offside plate is supplied.

These are exact replicas of the kick plate sold by BMC/British Leyland but there were...

£12.80 exc vat

£15.36 inc vat
GEAR LEVER GAITER MAGIC WAND TYPE
14A6860

Magic Wand rubber shift boot.

The first Minis had a very simple gearchange, the lever exits the transmission directly through the floor. This requires a special boot to accommodate the curves in the floor and tunnel and being rubber it event...

£11.75 exc vat

£14.10 inc vat