OIL COOLER KIT FOR 1997 ON MPI MODELS
MOC2000

£136.35 exc vat

£163.62 inc vat

In stockIn stock
Oil cooler kit for MPI models. Oil cooler is 10 rows, 21cm long and 9cm high. Unions are 18mm and require the special fitments as supplied in this kit. The oil filter is GFE210

£136.35 exc vat

£163.62 inc vat

In stockIn stock

Recommended usage 1 x MOC2000 to fit one mini.
Oil Pumps, Filters and Coolers - Qty 1

Kit contained products

Short oil filter for MPI when space is restricted through modification or optional oil cooler fitted



MANN supplied Filter



this short filter DOES NOT fit the MPI block. it ONLY fits the oil cooler take off

People also bought products

5/8" straight connector piece for heater hose modifications on late minis.

Useful when re-routing hoses or joing hoses.

1" long from bend to take a push on fit 1/2"hose-has 1/2"BSP thread to fit oil cooler and has 45 degree angle bend

1" long from bend to take a push on fit 1/2"hose-has 1/2"BSP thread to fit oil cooler and has 90 degree angle bend

Set of engine block and filter head unions for pre 12A engines (1992).

these take push on oil cooler hose.

These braided oil cooler hoses are the best available and although longer for the mini clubman many mini racers use these for the extra length to enable fitting to a standard mini. Short Pipe: 14" Long Pipe: 24"

Oil temperature sender unit housing for checking oil temperature.

Fits into the oil cooler hose.(Not compatable with braided hoses) Fitted before the oil cooler will show maximum temperature reached. After the oil cooler it will tell you the...

Whether you are installing a cooler from scratch or merely need to replace your tired old rubber hoses, you'll like the looks of this stronger Braided hose kit. The hoses are fully assembled, with the proper fittings in place and even include the nec...

These are the original brackets (2 required) used to fit on the front subframe to hold the oil cooler. For later cars check you have clearance.

SOLD INDIVIDUALLY.

A must for road use when an oil cooler is fitted.

In the past, fitting an oil cooler was mandatory once an engine had been even slightly uprated. The main reason for this was the quality of motor oils available at that time. If the oil temp...

Special formulated hose for oil, this is for people who have special oil cooler fittings and ends that use lengths of hose. This 1/2" hose is also used for all closed circuit breather systems and uses 3H2963 clips. SOLD AS REQUIRED PER F...

It is critical to understand that an oil cooler is not designed to last the life of the car. Sound maintenance practice tells us that whenever we are doing a major engine overhaul we should not fail to replace the cooler as it is almost impossible to...

Fits every A series engine from 1959-1996 (except twin point injection minis)

they have a different switch GPS135 and also have a transducer for oil temperature (YCB100320).

These original type oil switches...

MPI only. 3 YEAR GUARANTEE-UK made.Large impeller higher capacity water pump. Mini Spares procured product as original Rover Airtex tooling has been scrapped.

Fitted with a PPS, glass filled plastic impeller as used by Jaguar and Aston Marti...

3 YEAR GUARANTEE-UK made.Large impeller higher capacity water pump with top quality die cast body . Mini Spares procured product as the original superb Rover Airtex tooling has been scrapped.

Fitted with a PPS, glass filled plastic impeller...

Spring clip for securing the top hose on MPI front mounted radiator models, now in stainless steel.

Spring clip for securing the top hose on MPI front mounted radiator models.

Radiator hose kit for all mpi Minis. This kit has top and bottom radiator hoses all in shiney red Silicone that should last forever and not degrade with heat, time and environment. This kit is ideal for both the racer who never wants a failure or the...

Radiator hose kit for all mpi Minis. This kit has top and bottom radiator hoses all in shiney black Silicone that should last forever and not degrade with heat, time and environment. This kit is ideal for both the racer who never wants a failure or t...

Radiator hose kit for all spi Minis. This kit has top and bottom radiator hoses and 2 lengths of heater hoses…all in shiney black Silicone that should last forever and not degrade with heat, time and environment. This kit is ideal for both the racer ...

Unless your're heavily into the concours scene you'll love these hoses! These silcone hoses will withstand higher temps and pressures and will last virtually forever! Made to fit 1275cc cylinder head the length is made to cover 1275cc engines includi...