£73.95 exc vat
£88.74 inc vat
In stock
Black face available as SIB110.
£73.95 exc vat
£88.74 inc vat
In stockRecommended usage 1 x SIB110MG to fit one mini.
Original black face time clock with Smiths name on face.52mm diameter clock. 12 hour analogue clock also available in white face as SIB110MG.
Original white time clock as fitted by Rover to cars with wooden or metal dashes from 1990-1999. 52mm size Manufactured by Caerbont. From 1999 on the clock manufacturere was changed to VDO with a full numerical figured clock.
Original black face time clock with Smiths name on face.52mm diameter clock. 12 hour analogue clock also available in white face as SIB110MG.
Electric water gauge as standard on the centre binnacle Mini. Marked 50-90-140°C Genuine Smiths. With a magnolia face.
Smiths Electric oil pressure gauge in Magnolia.
Sender PTR1810-1-10 required.
KM/H version of DASH0100MAG. If you have a 3 clock instrument panel from 1988 on (Nippon seiko stamped on them) it probably has black dials and these will convert your clock to the more fashionable magnolia white colour.
This unit fits directly on to the gearbox in place of the standard cable and produces a digital signal for use with any electronic speedometer requiring 12 or 5 volt square wave pulse such as our electronic speedo 13H4443. For pre 1980 s...
Brand new modern electronic version of the classic centre speedo, housed in a billet case with OLED display this unit fits as per original speedos. Features include:
*Trip and total miles
*Remote trip reset
*Driv...
This is the bulb holder for the original Smiths auxillary gauges fitted to 3 clock centre dashboards i.e 13H4459 and 13H4460, will also fit the aftermarket Smiths gauges (SIB part numbers).
Smaller 52mm face and reading 0-80 x100-If you are serious about your driving then you want to understand how your engine is responding to your urges. Many types of tachs are available in the aftermarket but since we drive British it should say "Smi...
0-30 psi electrical boost pressure gauge 52mm with Magnolia face. Also reads vacuum down to 15inHg. Requires an electrical pressure sender TURBO02.
Complete binnacle set for centre speedo cars, kit includes 200 kph magnolia speedo, temperature gauge, oil pressure gauge, binnacle and chrome surround (incl clips).Mini Spares also have a short loom which converts 3 clock Nippon
Seiko gauge...
Voltage stabiliser for clubman/2-3 clock side pod(smiths) up to 1988. Three terminals/br1303/20.
With this large diameter line to the oil pressure guage you can actually see minor fluctuations in the pressure at idle or when the relief valve bounces open and closed. Because the braided steel line is one piece from the block to the gauge there is...
We sell about 20 of these per year and many are used on similar models to those indicated-Main and dash loom only--No side wing indicators-indicator stalk on right-alternator-rear lamps with reverse lights-steering lock-inertia starter-centre speedo ...
Angled oil pipe adaptor for fitting in confined spaces to eradicate damage of oil pipe, requires an OA adaptor if being used with a oil pressure gauge/t-piece.
Oil pipe in plastic 5 feet long, if fitting to a Tim gauge you will require LMA017 adaptor for the gauge.
Not comppatable with the CAM6431 standard oli pressure block union, and OA shoudl be purchased to fit.
29" long for L/H/D cars from about 1988 on when Seiko nippon speedo gauges are fitted. earlier cars used a 33" cable GSD102 which had the grey end but are interchangable and cheaper.
Contact Us| About Us| Terms| Switch to main website
Copyright @2014 Mini Spares. All rights reserved e&oe.